Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.9 LAccepted-AOC KG 115 SABIRA MANZIL HBR 2ND STAGE VENKATESH PURAM BANGALORE 560 045 | BENGALURU URBAN | KARNATAKA | 560045 | L1 | Accepted-AOC being L1 | |
| 2 | L2₹52.9 L+₹4.0 L (8.18%)Rejected-Finance BUILDING NO FLAT NO 19 6TH CROSS ROAD SANJEEVINI NAGAR MUDALAPALYA BANGALORE 560072 | BANGALORE | BANGALORE | KARNATAKA | 560072 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹53.3 L+₹4.4 L (8.90%)Rejected-Finance 606 80 FEET ROAD 7TH BLOCK 2ND PHASE BANASHANKARI 3RD STAGE BANGALORE 560 085 | BANGALORE | BANGALORE | KARNATAKA | 560085 | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹53.4 L+₹4.4 L (9.04%)Rejected-Finance | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹55.9 L+₹7.0 L (14.3%)Rejected-Finance | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
5 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RD East Bangalore
GE I RD East Bangalore 93
PROVISION OF IN HOUSE SITE DEVELOPMENT OF LCA FCS PROJECT AT ADE AND CERTAIN SANCTION MINOR WORKS UNDER GE I RD EAST BANGALORE
2022_MES_547781_2
8295
Open Tender
Civil Works
Item Rate
270 days
GE I RD East Bangalore
D a (i) b (i)
8 documents required · 8 mandatory
₹500
Yes
GE I R AND D East Bangalore
₹94,000
Yes
28 Dec 2022
14 Sept 2022
7 Oct 2022
15 Sept 2022
5 Oct 2022
23 Sept 2022
15 Sept 2022 - 19 Sept 2022
Amount
Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge.
Providing and laying in position cement concrete of up to plinth level : 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) ) excluding the cost of centering and shuttering - All work up to plinth level complete
Providing and laying in position cement concrete of up to plinth level :1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)
M&L centering and shuttering including strutting, propping etc. and removal of forms for Foundations, footings, bases of columns, etc. for mass concrete
M&L centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
M&L centering and shuttering including strutting, propping etc. and removal of forms for Columns, Pillars, Piers, Abutments, Posts and Struts
M&L steel reinforcement of Hot rolled deformed bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
M&L steel reinforcement of Hot rolled deformed bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the Concrete of M25 grade with minimum cement content of 350 kg /cum upto plinth level Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the Concrete of M25 grade with minimum cement content of 350 kg /cum above plinth level upto floor V level Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
Add for using extra cement in the items of design mix over and above the specified cement content therein.
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
M&L rendering15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) complete
Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA) upto 25%))
M&L broken glass coping on top of walls in cement mortar 1:3 complete
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
Finishing walls with water proofing cement paint of required shade : new work (Two or more coats applied @ 3.84 kg/10 sqm) complete all as specified and as directed
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Removal of suplus excavated soil and disposed outside MD land and deposited at destination where State government has marked.
S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified
M&L for prelaminatd particle board, 12mm thick interior grade, prelaminated both side with decorative choice lamination , fixed to alluminum frame/cleats in square as in partition complete all as specified and as directed
S&F 4mm thick sheet glass, ordinary quality frosted glass, glazing fixing with alluminum frame/ cleats all around the glass, in square in exc 0.5 sq.m in each pane complete all as specified and as directed
Surface Excavation, n exc 30cm deep and averaging 15 cm deep and getting out soft/loose soil.
Rolling and consolidating formation surfaces in cutting with power roller 8 to 12 tonne complete all as specified and as directed
M&L soling (or sub base) 100mm thick with broaken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed
M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed
M&L cement concrete work in pavement / hard standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.
M&L formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all n.exceeding 20cm wide. (where RCC/PCC band in walls, spanning and opening complete all as specified and as directed
Finishing surfce of concrete pavements by brooming
M&L forming only 20 mm wide expansion joints in pavements 250mm thick and filling with bituminous pre formed filled board upto approx 35 to 40mm below the top surface of slab complete all as specified and as directed
M&L forming only contraction (Dummy joints 65mm deep x 10mm wide and filling with bituminous pre formed filled board upto approx 30-35 below the top surface of slab complete all as specified and as directed
M&L Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as specified and as directed.
M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
Dismantling Interlocking Paver as specified and directed.
Supply and fix Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified and as directed
Material and Labour for sand filling under floor including watering, consolidation, and well ramming complete all as specified and as directed.
M&L preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises
M&L Granite (of any type) work 20 mm thick (table rubbed and polished)in staie case steps, jambs, pillars, windowcills, cooking platforms and like in including cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
M&L for PCC 1:2:4 type B1, 25 mm thick (using 20 mm graded stone aggregate) as in flooring/ paving finished rough to receive cement tiles complete all as specified and as directed
M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed
M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed
Removing of demolition/excatated materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land.
M&L for pre-cast cement concrete, Type C1 (PCC 1:3:6), block masonry with solid blocks, exc 10 cm in width and setting mortar in CM 1:6, complete all as specified and as directed
M&L cement concrete 1:4:8, type D -2 (using 40 mm graded stone aggregate) as in foundations,filling and mass, complete all as specified and as directed
M&L PCC 1:3:6, type C -2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base, sub-floors, floor and pavings, complete all as specified and as directed
M&L PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in flooring 70 mm thick finished even and rough by brooming without using extra cement complete all as specified and as directed
M&L Rendering 15 mm thick cement mortar 1:4 on stone masonry wall finished even and smooth without using extra cement complete all as specified and as directed
M&L applying 2 coats of Exterior emulsion Finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall new plaster surface including cornices, plasters etc by all as specified and directed (Make/Brand Name : Asian Paints/Apex ultima, Berger Paints/Weather coat All Guard, Jenson /Nicholson/Safe Guard).
S & F 12mm thick wave free toughened clear glass with stainless steel spider fitting,fish mouth channel in bottom and top as per design with and including provision of all other neccessary fixture and accessories,complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete
M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation complete all as specified and as directed
M&L for RCC M-25 design mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs etc complete all as specified.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete
S&F for pre-painted galvalume aluiminum zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed
M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed
Supply, laying and fixed of galvanized punched tape concertina coil (coil dia 600mm at closed position) complete having galvanized spring steel core wire 2.50 mm dia cold drawn steel galvanized punched type of low carbon steel having series of sharp barbs uniformly punched along its length 125 to 127 Nos of barbs on pheriphery per revolution, crimped on steel spring core wire galvanized clips, GI steel wire handles hooked to coil for handling MS square bars spike hooked with coil having pointed face for anchorage coil including spreading of each coil min 10 Mtr length adequately tied to GI barbed wire fencing with GI wire of not less than 16 gauge at every 500mm spacing typing of handles of succeding coil with preceding coil with GI wire not less than 16 gauge, layer over 'Y' neck of angle iron posts.
S&F premium best quality wall papers on painted wall surfaces and removal of existing wall paper complete all as specified and approved by Engineer-in-charge
S&F premium quality venetian blinds in any colour and design for windows and removel of existing blinds complete all as specified and approved by Engineer-in-charge
Complete removal of existing treatment of wall surfaces and finishing the surface with two or more coats of Birla/JK wall care putty to receive the good & smooth surfaces and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.
Supply and fix powder coated aluminium ( minimum thickness of powder coating 50 micron) section as in window, ventilation, glazed with aluminium shutter, one or more rebates including joining clips for fixing, glazing clips, rubber beading screwed and handle complete all as specified and directed by EIC including taking down old joinery.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
S&F 10mm PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/GI/MS as per specification and drawing
All as per item No No 71 here-in-before, but excluding PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium /GI. /MS as per specification and drawing
Taking down carefully U/S aluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc , removing all material for reuse/ issued under sch of credit and making good the distrubed surface as the existing one, complete all as directed.
M&L Point wiring complete with Multi stranded copper conductor size 1.50 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduiton walls/ floors/ ceiling etcwith and including metal flush boxes of suitablesize and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.
One light point controlled by one way switch
One fan/exhaust point controlled by one way switch
One 3 pin socket point 5 Amps on same board.
One 3 pin socket point 5 Amps on independent board.
All as per item No 74 here-in-before, but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 2.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps soket outlet independently.
Supply & fix switch modular type single pole 1 way 6 Amp 230 volt complete as directed.
Supply & fix socket combination 6 Amps modular type, 230 volts grade all as directed.
Supply & fix Socket combination 6A/16A - modular type 230 volts grade with frame and cover all as specfied.
Supply & fix switch modular type single pole 1 way 16 Amp 230 volt complete as directed.
Supply & fix ceiling rose surface backelite two to three terminal complete all as directed.
Supply and fixing of sheet metal enclosure powder coated, Distribution board, Double Door type, VTPN MCCB 125 Amps as Incomer, 8 way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Cement spill protector, Door earthing, complete Make INDOASIAN, Model Optipro F1+ 24 or equivalent of HAVELLS/ L & T/ LEGRAND
Supply & fixing of MCCB 4 pole, 125 Amps 415 Volts 16 KA
Supply and fixing of MCB DB TPN 4 Way Double door type
Supply & fix 'C' Curve MCB TPN 32 Amps 415 volts 10 KA rupturing capacity complete all as directed
Supply & fix MCB SPN 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as directed.
Supply & fix 'C' Curve MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as directed.
Supply and fixing of motor starter power unit suitable for satarting of AC, 20 Amps Power unit Make : Havells, CAT REF : AHLO202504
M&L for sub main wiring complte with 4 runs of 16 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 runs of 16 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note : 4 runs of 16 sqmm cable and one run of earth continuity cable shall be measured and paid as one length
M&L for sub main wiring complte with 4 runs of 10 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 runs of 10Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note : 4 runs of 10 sqmm cable and one run of earth continuity cable shall be measured and paid as one length
M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 6 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note : 4 runs of 6 sqmm cable and one run of earth continuity cable shall be measured and paid as one length
M&L for sub main wiring complte with 2 runs of 4.00 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 4 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note : 4 runs of 4 sqmm cable and one run of earth continuity cable shall be measured and paid as one length
Power console made out of aluminium insulation material poly carbonate sheet of colour as approved in standard length comprising of 5 Nos 5/15 Amps 5 pin electric socket controlled by one switch (modular type) with one control MCB 20 Amps SP and indication lamp fitted, internal wiring including fixing of console on pedestal made out of MS frames, etc of suitable size all as directed. Make :- Anchor roma.
M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick buried in ground verticallyto a depth not less than 2.25mtrs below normal ground level with top edge of the plate not less than 1.5mtrs below ground level connected to galvanised iron /steel strip of size 25 x 4mm thick by means of bolts, nuts , check nuts and washer made out of ganvanised iron or steel all as shown in electrical plate No-03 of SSR part I and earth strip protected by GI pipe light grade 40mm bore and through test point including necessary earth work and excavation in any type of soil, GI light grade 20 watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab 6mm dia MS bars at 100mm c/c both ways with MS Hooks 6mm dia ms bars etx complete all as specified and directed and testing on completion. Note : GI Strip upto 7.5 Mtr length shall be deemed to include in this items.
M & L for galvanised iron strip earth continuity main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn on walls of size 25 x 4 mm all as specified and directed.
Supply and fixing DLP U-PVC Cable trunking systems and acessories snap on trunking 80 x 50 mm supplied without cover, Legrand Cat no : 010412 80mmx50mm PVC Trunking
Supply and fixing of flexible cover only, full cover size width 65 mm suitable for 80mmx50mm PVC Trunking Make : Legrand Cat no. : 010521
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete
S&F in repairs FTL fitting with energy efficient 2x2 LED recess mounting fitting 36W, troffer with microprismatic diffuser suitable for indoor spaces suitable in 4000K & 5700K complete with fitting arrangement all as specified and as directed Make : Philips Cat Part No : RC380B LED36S-6500 G5 L60 W60 PSD OD OC
Modular Computer Workstation with Pedestal : L shape Modular Computer Workstation of size 1500mm (L) x 600mm (D) x 1200mm (H) with Hybrid panel based system (combination of sliding & snap fit tiles) of 50mm main frame with steel structure of fabricated tiles with one mangnetic white board and Bottom Frame Aluminium Extrusion of Powder coated. Table top of the workstation to be made up of 25mm thick Prelaminated Particle Board edge banded with 2mm PVC tape. Pedestal with castor wheel having 2 Drawers + 1 File box should be provided with workstation. Model : Wish Penta 1 seater Make : Godrej or equivalent in Stellar or Durian
Table of size 1500x750x725mm : Table of size 1500x750x725mm made up of three layer Pre-laminated Particle Board having top of thickness 25mm and edge to be banded with PVC tape of 2mm thick, Thickness of gable end and modesty panel will be 19mm and edge to be banded with PVC tape of 2mm thick. Model : Versaline Make : Featherlite or equivalent in Durian or Godrej
Pedestal for Table : Pedestal of size 400 mm(width) X 485 mm(depth) X 665 mm(height) made up of pre-laminated particle board of size 18mm thick for outer body and drawers, 12mm thick for back of the pedestal and drawer bottom. Pedestal shall have three drawers (2 drawers + 1 File Box) without any handles. Model : 2D1F Make : Featherlite or equivalent in Durian or Godrej
Table of size 1200x750x750mm : Table of size 1200x750x750mm made up of three layer Pre-laminated Particle Board having top of thickness 25mm and edge to be banded with PVC tape of 2mm thick, Thickness of gable end and modesty panel will be 19mm and edge to be banded with PVC tape of 2mm thick. Alongwith Table one Pedestal to be provided having 2 Drawers + 1 File Box. Model : Versaline Make : Featherlite or equivalent in Durian or Godrej
Chair Revolving Computer Medium Back : Chair Revolving Medium Back with arm central tilt. Base shall be of Nylon with NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size. Arms shall be adjustable and made up of steel covered with polyurethane. Seat shall be made up of PU Foam covered with Fabric. Back of the chair will be upholstered with mesh fabric. Model : Contact MB Make : Featherlite or equivalent in Durian or Godrej
Chair Revolving Computer High Back : Chair Revolving High Back with arm central tilt synchronic. Base shall be of Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size. Arms shall be adjustable and made up of steel covered with polyurethane. Seat shall be made up of PU Foam covered with Fabric. Back of the chair will be upholstered with mesh fabric. Model : Contact HB Make : Featherlite or equivalent in Godrej or Durian
Table Executive of size 1800x850x750mm : Table Executive of size 1800mm (L) x 850mm (D) x 750mm (H) with double storage unit. Table made up of three layer Pre-laminated Particle Board having top of thickness 50mm and edge to be banded with PVC tape of 2mm thick, Thickness of gable end and modesty panel will be 15mm and edge to be banded with PVC tape of 2mm thick. Model : HT-528 Make : Featherlite or equivalent in Godrej or Durian
Table Conference 8 Seater : 8 seater Rectangular Discussion/Meeting Table of size 2400(L)x1200(W)x 750(H)mm made up of three layer Pre-laminated particle Board having top of thickness 25mm with wire management system. Model : IDEATE 8 seater Make : Godrej or equivalent in Stellar or Durian
RAHUL ENTERPRISES
Lucky Enterprises
R R Constructions
SAI CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .