Subwork Providing Fire Fighting,False Ceiling,T.W Entrance Door,Water purifier,Al.partition and lead lining Door to the newly Addl Bldgs OP and IP Blk ,CEMONC Blk,TAEI,Mortuary,BMW room,Blk 1,Blk 2,Radiology Blk for GHQ Hospital at Palani in Dindigul

Amount

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.

200 mm dia

150 mm dia

100 mm dia

80 mm dia

50 mm dia

25 mm dia

Wrapping and coating anti-corrosive treatment for the following under ground MS pipe having one coat of anti corrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specifications and as directed by the Departmental Officers.

100 mm dia

80 mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT

150 mm dia

100 mm dia

80 mm dia

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re- doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re- doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.

150 mm dia

100 mm dia

Supply, erection, testing and commissioning of cast iron body and gun metal or stainless steel Internal Non-Return Valveof size of 80mm dia to control one way flow of to be installed pump room at delivery line and near overhead tankat terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portionsto its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H- GURU / ISI MAKE / EQUIVALENT.

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.

Supply, erection, testing and commissioning of Fire Fighting 2WayFireBrigadeInletwithnecessarygun metal 63mm dia non-return spring shutter arrangements so that tocontrol oneway flowat the time of emergencywater supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: KIARTAR / OMEX / EQUIVALENT)

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Ratedfor2280LPM at 70metreshead with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. (Make: Kirloskar or Equivalent). The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Deparmental Officers.

Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required. a. Endsuction, topdischargecentrifugal pumpof cast iron body&bronzeimpellerwithstainlesssteel shaft,mechanical seal toensureaminimumpressureof 3.5kg. / sq. cmat highest and farthestoutletat specifiedflowof2280LPMat 70m head conforming to IS 1520. b. 68 BHP, 1500 RPMwater cooledwith radiator, diesel engine conforming to relevant BS&IS standard complete. Auto starting mechanism,12volts/24 volts electric starting equipment like self motor, dyanamo, solenoid switches etc. c. 110 litres capacity diesel tank mounted over stand fabricated using 25mmx 25mmx 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuelpre-filter,after filter etc. (Make: Kirloskar / Equivalent). d.Exhaustsystemhaving flexiblemetallicmufler,100mmdia MS heavy pipe extended upto1m,out side pumpho useduly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencerwithnecessory MS support arrangements fromwall or ceiling as per site condition. e. Dashboard consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure

Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration mounting etc., including conveying, fixing and incidental charges., etc., complete as per standard specification and as directedbytheDepartmentalOfficers.(Make:Kirloska/ Equivalent)

Supply, erection, testing and commissioning of fire fighting application mono block motor pumpset of 450 LPMat 20 metres head to develop 2.0kg/sq.cmat theheightest and farthest hydrant point to make10m water jet at the time of fire fighting emergency cicumstances,coupled with3.75KW/ 5HP rated three phase 415volts,50Hz,2880 rpm electrical motor, the pump with cast iron body, bronze impeller, rope gland packaging, suction sizeof 80mmdia.deliverysizeof 65mmdia, including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directedby theDepartmental Officers (KirloskarmakeKDS 538 or Equivalent))

Supply and laying of following sizes of Armoured Aluminium/ Copper Cables for electrical motor, control panel,pressure switch, jockey motor etc., all incidental charges,neccessary scaffolding and re-doing the dismantled portionsto its original condition wherever found neccessary,etc., completeas per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON /FINOLEX / EQUIVALENT

3 core 185 sq.mm. armoured aluminium cable Electrical Pump

3 core 10 sq.mm. armoured copper cable - Jockey Pump

10 core 2.5 sq.mm. armoured copper cable - Diesel Engine

2 core 2.5 sq.mm. armoured copper cable - Instrumentation

Supplying and Fixing GI Earth strip 25 x 6 mm

Supply and providing1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT

Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table ‘E’, gaskets, bolts & nuts,etc., installed at end of 150/200 mm dia suction pipe line at sump including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever foundneccessary,etc., completeandasper standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT

150 mm dia

100 mm dia

Supply, erection, testingand commissioningof GunMetal GateValve of size 50mmdia size including necessaryMS flange of table ‘E’, gaskets, bolts&nuts etc., installed at pump house delivery line for the purpose ofprimingwaterto suction line including conveyance, all incidental charges, neccessaryscaffolding and redoingthedismantled portions to its original condition wherever found neccessary,etc., complete as perstandard specification and as directedbythe Departmental Officers. Make: LEADER / EQUIVALENT.

Supply and kept in position of 9 litres capacity Fire Bucketsof 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers

Supplying and fixing M.S. Grill of approved design for open courtyard, grill, grill works to doors and window opeings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification

Supply, installation, testing and commissioning of MicroProcessor based conventional 8 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230/24 volt SMPS unit, 2Nos. of 12volt 7AH stand by batteries, suitable mounted on wall using fixing accessories like screws, plug, clamps and etc.,as per standard methods and as directedby the Departmental Officers.

Supply, installation, testing and commissioning of ManualCall Point (MCP) providing on wall using fixing accessories likescrews, plug, clampsandetc., asper standard methods and as directedbythe DepartmentalOfficers. (Make: Ravel / Equivalent)

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixingaccessories like screws,plug,clamps and etc.,as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)

Supply and layingof FRLSPVC insulated2 core1.5 sq.mm. Armoured Copper Cableon ceiling/ wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick)

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.B3538and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.

Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of double leaves door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section-Vertical &Top rail: 50x44.45x2.50mm @ 1.292 kg/m and Bottom rail : 100 x 44.45 x 2.50mm @ 1.974 kg /m , Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 2Nos ., lock-1No., Door stopper with rubber bush including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc. complete. All the Alu. sections are to be anodised with matt finish under

Supplying and erecting in position of following Liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable water with World Health Organisation (WHO) standards with following accessories…

1000 Litres Capacity

500 Litres Capacity

Manufacturing, Supplying and fixing in position Incinerator for Ladies Bathroom. The cost includes all taxes, transportation, labour charges for mounting in position, dismantling the masonry and redoing to original condition, providing exhaust pipe, all electrical works including giving electrical connection from the source point etc., complete complying with standared specification and as directed by the departmental Officers.

Supplying and fixing following Burma Ornametal teak wood entrance door asper the drawing and desings approved by the departmentals offices. The outer framce of the door sis 150mmx125mm teak wood.The main door shutter opening size is 1.58mx2.35m. The main door should be double leaves and each door shutter outer frame of size 150mx50mm teak woods.The door Panel shall be of 50 mm thick teakwood planks with orenamental design approved by the Executive Engineer.The lock Rail shall be of 200x50mm thicks teakwood.All the doors frames are made out of 150mmx125mm teak wood of best quality.The door frames and shutter shall be given two coats of best approved quality melamine finish.The rate inclusive of cost of approved quailty teakwood,brass hings,brass tower bolts,brass aldrops,door stoppers,brass screws.

Providing and fixing of 1.2mm thick Lead Lining Door for X- Ray Rooms, Scanning Rooms with Mild Steel Door Frames 105mm x 57mm X 18 G and 12 G x 50mm Shutter made of GI with PWG finish and honey wool insulations with SS 101mm x 75mm x 3mm SS 304 Ball Bearings Butt Hinges, Mortice Sash Lock ML 100A, 50mm BS, 85mm centre, CL 207 : Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make), Heavy Duty Door Closer, Frames fixed wih walls using Mortice Sash Lock ML 100A, 50mm BS, 85mm centre CL207: Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make) all neccesary accessories and fittings as per the required and as per the approval for the Department Officer

Manufacturing Supplying and fixing in position of Modular Operatioin theatre door size 1.5mx2.10m .The Door frame shall be Box section using Stainless Steel Plate of 1.20mmm thick of 100X60mm with a rebate of 30/35mm thick 15mm on one side of the frame. The Door frame shall be made of 0.80mm thick stainless steel of 304 grade and packed with powder craft honey comb polyurithane. Glass arrangements shall be fixed in position for vision.Necessary fittings such as Door Closure, D type handles, ball bearing but hinges and concealed automatic door bottom seal shall be fixed. The rate includes transportation, labour charges, drilling the wall wherever necessary with power drills to the extent required and make the damaged portion to good condition after fixing as directed by the departmental officers. The Door Should be approved CER No : 63CE/2022-23

SRP CONSTRUCTION COMPANY (BID ID -1239977)

P and C Projects Private Limited (BID ID -1239413)