SPL REPAIR TO SINGLE OFRS ACCN OF 324 FD REGT AT GG FORT AT OLD AMRITSAR CANTT

Amount

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar.

Material and Labour 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtre of pigment to match the shade of granite over and including screed bed of 15mm thick in CM 1:6 laid complete all as specified

Material and Labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 50mm thick sand cushioning complete all as specified and directed.

Material and Labour 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate ) as in floor complete all as specified and directed.

Material and Labour PCC 1:2:4 type B-0 using 12.5 mm graded stone agg in coping including weathering slightly rounded or chamfered angle and throating as directed.

Material and Labour for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in plinth protection Finishing fair and even.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

All as per Srl item No 9 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 8 shall be reused after necessary cleaning of mortar).

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed

Material and labour preparation of newly plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over 2mm thick wall care putty complete all as specified.

Material and Labour for preparation of newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and Labour for complete removal of existing treatment from fall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including preparation of wall surfaces complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each

Taking down chowkat or frame with shutter (without taking off shutter from frames) exc 1.5 Sqm and n.exc 4 Sqm

Dismantling floor, hearth or wall tiling including cement mortar bedding including backing complete and removing serviceable tiles to store and rubbish off the premises.

Material and Labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed.

Supply and fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

Supply and fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Supply and fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both side complete all as directed.

Supply and fixing 2nd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

Material and Labour two coats of synthetic enamel painting on newly wooden surfaces of any description over 10 cm in width or girth not otherwise described above one coat of pink primer including prepration of previously untreated surfaces.

Supply and fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Supply and fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed.

Supply and fixing 150mm long Aluminium handles, cast type anodised.

Supply and fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and fixing pressed steel frames 1.25mm thick for door size of frame165 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

Material and Labour PCC 1:2:4 , type B-0 (using 12.5 mm graded stone aggregates) in bed blocks for hold fast and similar nature of works

Supply and fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

Supply & Fixing rotational moulded polythene triple layered water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including dismantling of existing water tank.

Supply and fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

Supply and fixing for Anodised aluminium snap grid frame work of size of grid 600 x 600mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level all fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long as specified

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over aluminium snap grid 600mmx600mm frame work or metal frame work complete all as directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc), or insulation boards/slabs/blankets any thickness including cover fillets

Supply and fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)

Supply and fixing Powder coated anodised aluminium window and ventilator shutters, side hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. (Min. thickness of powder coating 50 micron)

Supply and fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Material and Labour 9mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with aluminium snap grid beading and screws to aluminium frame work complete all as directed.

Supply and fixing powder coated anodised aluminium door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Min. thickness of powder coating 50 micron)

Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (Min. thickness of powder coating 50 micron)

Supply and fixing for Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor with door shutter over lenth of cover plate150mm.

Supply and fixing Brass Mortice loc 4 levers, vertical type, size 100 mm complete all as specified and directed

Supply and fixing for aluminium (extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Material and Labour 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination,as in cup bd shutters and shelves etc complete all as directed.

Supply and fixing Framed work as in doors or gate of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete cofirming to FE-290(Gde E-165)

Demolition reinforced roofs projection, beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition).

Material and Labour for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in chajjas, fascia, slab and the like complete all as specified and directed.

Use and waste of formwork to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed.

Material and Labour PCC 1:1.5:3 type B0 using 12.5 mm graded stone aggregate for repair of Chajja, Fascia, parapets etc using chicken wiremes upto 9m height including necessary formwork, scaffolding. and applying two coats of exterior emulsion weather proof paint over a coat of exterior primer over cement plaster 1:4 complete all as specified and directed.

Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer including prepration of previously untreated surfaces.

Supply and fixing in repair 20mm bore stop valve, cast copper alloy of screwed down high pressure with crutch or butterfly handle screwed bothe ends for iron pipe or for unions complete.

Supply and fixing in repair 75mm PVC floor trap complete all as specified.

Supply and fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed Make:- Jaquar

Supply and fixing in repair 15mm bore concealed type stop cock cast copper alloy of CP screwed down high pressure with crutch or butterfly handle complete.

Supply and fixing in repair 15mm bore angle cock cast copper alloy of CP screwed down high pressure with crutch or butterfly handle complete.

Supply and fixing PVC connection 15mm size with PTMT nuts of length 600mm

Supply and fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store.

Supply and fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including all fittings complete all as specified and directed by Engineer-in-charge

Supply and fixing in repair One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore complete all as specified and directed. Make: CERA/Jaquar

Supply and fixing in repair PVC Jet spray suitable for EWC.

Supply and fixing in repair Chromium plated Health faucet with 1.5 metre long chain.

Supply and fixing in repair PVC waste pipe 32mm dia fixed to WHB/Urinals.

Supply and fixing in repair WHB mixture Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed. Make:Jaquar

Supply and fixing in repair Vanity of size 820x450mm with vitreous China wash basin white,with suitable size including CP waste coupling 32mm bore, PVC waste pipe complete all as specified and directed.

Supply and fixing in repair wall mixer (three in one) with telephonic hand shower 15mm bore, of brass cast copper alloy, chromium plated, with brass legs screwed for iron pipe and fixed. Make:Jaquar

Supply and fixing in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Supply and fixing 110mm PVC (SWR) bends any radius

Supply and fixing in repair PVC (SWR) pipe 75mm dia fixed on wall or in trenches and floor complete all as directed.

Supply and fixing in repair PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as directed.

Supply and fixing in repair 25mm dia stainless steel curtain rods with brackets, stops , rollers finials 1 pair of decorative knobs for each curtain rod etc complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

Supply and fixing in repairs CP brass towel rail of 20mm dia and 600m long complete all as specified and directed.

Supply and fixing in repair 75mm PVC (SWR) bends any radius.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.complete all as directed

Material and Labour for point wiring complete with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit, ISI marked, not less than 20mm bore with conduit accessories concealed in wall, fixing with clamps on ceiling/roof etc., with pressed steel terminal boxes of suitable size & modules, concealed in walls incl plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed. NOTE: Pressed steel terminal boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust incl suitable thick laminated sheet cover plate for mounting switch/sockets/regulator/bell push etc, concealed in wall and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate

(a) One light point/Fan point controlled by one switch

(b) One 5 Amps outlet point on same board with other switches/sockets

(c) One 3 pin 5 Amps socket outlet on independent board.

All as per ser item No. 84 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed.

Supply and fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed

Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed

Supply and fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed

Supply and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified

Supply and Fixing Modular bell switch 6 Amp 1 module size complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed.

Supply and fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm sweep all as directed

Supply and fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI> 80, PF>95%, THD<10%, Lumen>2100 lm including LED tube light of make: Havells or equivalent in Philips/Crompton, connecting up with 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose complete all as specified and directed.

Supply and fixing Dusk & dawn roadway luminaries 25 Watt, 230 V AC, 6000K outdoor type with epoxy black powder coated sheet, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, GI pipe light grade not less than 32mm dia, made to shape as directed, having overall length not exceeding 1.5 mtr, through MS brackets of 25mm width and nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing all as specified and directed.

Taking down carefully existing serviceable Ceiling fan, ceiling cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose to fan complete all as directed

Supply and fixing exhaust fan, heavy duty, steel body AC single Phase, 230V of size 300mm sweep, with blades and frame and louvers complete fixed to wall with suitable MS bolts, grouted to wall including connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan complete all as specified and directed

Taking down carefully existing serviceable Geysers of capacity 25 ltrs, ceiling cable end, etc., removing the geyser for keeping in safe custody and refixing geyser with provn of new suitable MS bolts, PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers brass union, NRV, grouted to wall and connecting up including provn of new 3 core sheathed multi-stranded flexible copper conductor cable, writing MES No. including making good to the disturbed surface including cleaning of element, flanges, tank etc. and testing complete all as directed

Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.

All as per ser item No. 103 above but for SPN 12 way, 240 volts grade with 200 Amps insulated rated busbar

Supply and fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site complete all as directed

All as per ser item No. 18 above but for MCB SPN 32 Amps

All as per ser item No. 106 above but for MCB TPN 63 Amps, 415 V grade

Supply and fixing sub main wiring with 4 runs of 4.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 2 runs of 4.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete all as directed NOTE: Four runs of 4.0 sqmm copper cable and two runs of 4.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length.

All as per ser item No. 108 above but for sub main wiring with 2 run of 6 sqmm & 1 run of 6 sqmm as earth wire

Material and Labour for loadline distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, complete incl taking down old unsv one from site complete all as directed

Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.

Supply and Laying in trenches/drawn through pipes or in road crossings/paths/drains/ ducts/floors/along poles/equipments etc., of LT cable under ground, heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of 35 Sqmm 3½ core cross sectional areas including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and directed. NOTE: Excavation, earthwork, cable protection pipe shall be measured and paid separately

Excavating in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation for erection of poles, stays, laying cables, stays etc and getting out in soft/loose soil and in road cutting all as specified and as directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil all as specified and directed

Removing excavated material/surplus soil not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above starting point

Supply and lying HDPE pipe 65mm bore for covering of LT cables etc with all accessories complete all as specified and directed.

M/s. M Company (BID ID -3434330)