PROVN OF FENCING AROUND AF LAND AND HARD STANDING IN DOMESTIC AREA AT AF STN UTARLAI

Amount

Excavation in post holes(or similar holes) in soft/loose soil each n exc 0.5 cum each getting out, and removing surplus soil to a distance nexc 50m and making good surface.

M&L Cement concrete (1:3:6) type C2 (using 40 mm graded aggregate as in foundation of post, filling and mass concrete. Complete all as specified and directed by Engr-in-charge.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 E-165 all as directed. Complete all as specified and directed by Engr-in-charge.

Supply only chain link MS galvanised fancing any size all as specified and directed. Complete all as specified and directed by Engr-in-charge.

Fixing only chain link fencing including line wires of size 4mm dia GI wire any type of standards, rails straining bolts, etc including provision of binding wire. Complete all as specified and directed by Engr-in-charge.

Supply & fixing MS round bar 10mm dia and over for line wire to chain link fencing etc complete. Complete all as specified and directed by Engr-in-charge.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt , including securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed incl dismantling old broken/rusted barbed wire of any dia and remove from site. Complete all as specified and directed by Engr-in-charge.

S&F MS screw bolt (machine made) with hexonal or screwed head at one end and screwed the other end, and fitted with washer and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia bolt.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n.exc.10cm in width or girth and when unconnected with other painting or when painted in a different tint applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth; for foundation etc and getting out in any type soil complete all as specified.

M&L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggt) as in foundations, filling & mass concrete complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified.

Removing excavated material, n. exc 50 M and depositing where directed at a livel n. exc 1.5M above the starting point at the descriation of contractor complete all as specified.

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in footing, foundation or bases of columns all as directed. Complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in columns all as directed. Complete all as specified and directed by Engr-in-charge.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter. Complete all as specified and directed by Engr-in-charge.

Ditto as per Item 17 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns all as directed.

Formwork to sides of columns and similar work. Complete all as directed.

S&F Framed work as in doors or gates ( Ornamental and intricate design) of tube/angle or other section conforming to GDE Fe290-0 E165 Gde with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing incl fixing all items. complete all as specified and directed. Complete all as specified and directed by Engr-in-charge.

S&F mild steel work conforming to Fe 310-0 or Fe 410-0 in hold fasts of squre iron bar any size and any type incl ,hooks,pintle hinges,cleats hand made sliding bolts and smilar items complete all as specified.

Surface dressing n exc 15 cm deep in hard/dense soil incl removing of excaveted soil and simiar items .complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2(using 40mm graded aggr) as in sub base including necessary form work.complete all as specified and directed.

Provding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footpath parks lowns drive ways or light traffic parking etc of requied strength, thickness & size shape, made by table vibratory mathod using PU monld, laid in required clolur & pattern over and inclding 50mm thick compacted bed fine sand compacting and proper embeddiing /laying of inter locking paver balocks into the sand bedding layer through vibratry compacton by using plate vibrator filling the joints with sand and cutting of paver blocks as per requird size and pattern finishing and sweeping extra sand.Complete all as specified and directed by Engr-in-charge.

Provding and laying at or near ground lavel foctory made kerb stone of M-25 grade cement concrete in position to the requied line, line, level and corvture jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shapp not to more than 5mm) incl making drainage openign wherver required complete.Complete all as specified and directed by Engr-in-charge.

M&L for preparation of new or untreated concrete surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed.

S&F for vitrified parking tiles 10 to 12 mm thick ( square/rectangular) in any shade are of each tile area not exceeding 0.36 sqm. In floors, parking, hard standing and similar work etc Complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor Complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in coping,packing sides and finished even and smooth without using extra cement all as specified and as directed

M.D. CONSTRUCTION CO. (BID ID -3498537)