REPAIR/MAINT OF INTERNAL ROADS INCLUDING ROAD FURNITURE INCLUDING PCC PATH AT AATS UNDER GE (EAST) AGRA

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom & finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/tack coat with mechanical sprayer over road metal surfaces with bituminous primer (VG-10) @ 10kg per 10 sq metre complete all as specified and directed.

M&L for applying evenly a priming/tack coat with mechanical sprayer over old black top surfaces with bituminous primer (VG-10) @ 5kg per 10 sq metre complete all as specified and directed.

M&L for premixed bituminous macadam using paving bitumen of VG-30 grade with binder content 4% by weight of total mix and complacted to required gradient and camber laid by mechanical paver (consolidated thickness 75 mm or less) with 8 to 10 tonne vibrator power road roller etc complete all as specified and directed. Note:- (a) Bituminous macadam shall be mixed in hot plant transported from plant to work site and laid/spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used in lower side, the rate shall be adjusted however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A'

Material & Labour for 30 mm thick (consolidated average thickness) bituminous premix asphaltic semi dense concerete with 5.5% binder (of paving bitumen VG-30) content by weight of total mix, rolled & compacted with 08 to 10 tonne vibrator power road roller to required camber and gradient (Laying of bituminous premix asphaltic semi dense concrete with mechanical paver) complete all as specified and directed. Note:- (a) Bituminous concrete shall be mixed in hot plant transported from plant to work site and laid/spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used in lower side, the rate shall be adjusted however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A'

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minium 2.5 mm thick single coat as a centre line or edge line etc road marking of 150/100 mm width using 'HOT MARK' thermo plastic paint (Hot application white/yellow by indenous modern propelled road marking machine) as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler etc, thermoplastic reflective paint shall meet the MORTH specification including spraying of glass beads etc all as per manufactures instructions complete all as specified and directed.

Supply and fixing in repair of cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sab base of flooring complete all as specified and directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

Taking down of old precast concrete pave block of any size complete all as specified and directed.

Laying only of machine pressed precast concrete interlocking paver block 60 mm thickness, any shape and size complete all as specified and directed. Note :- Interlocking paver block obtain from item No.12 shall be used.

M&L for sand cushion for filling in floors of pavings laid in layers n. exc. 25 mm (compacted) thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F in repair plastic speed bump is designed so dynamically and compact that it can bear maximum load on it. The body of the running speed bump is made of PE material. Two highly reflective reflectors moulded in PMMA material are welded with PE base plate through ultrasonic welding process and then fixed on to the speed bump so that dust and water can not touch reflectors inside are and thus it maintains its reflectively for a long time. it is available in yellow and black colours. (Dimensions Length 750 mm, Width 250 mm) Height 75 mm, weight and load capacity upto 100 tonne complete all as specified and directed.

S&F in repair safety traffic safe PVC unbrakable convex mirror (80 centimeter) made of poly carbonate/ABS/Fibre including fixing arrangements, fixed to MS pipe 50mm dia and 1.5mtr high from ground level, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and embedded in ground with and including PCC 1:2:4 type B1 (using 20mm graded stone aggregate). excavation, ret, removal etc of size (45cm x 45cm x 60cm) complete all as specified and directed. Note :- The rate for excavation, removal of soil & PCC complete shall be included in above quoted rate.

M&L two coats of synthetic enamel paint over a coat of primer on new concrete /kerb stone surfaces including prepartion of surfaces complete all as specified and directed.

M&L two coat of synthetic enamel paint on old painted concrete/kerb stone surfaces including prepartion of surfaces complete all as specified and directed.

M/S J S ENTERPRISE (BID ID -3050291)

Gupta Automobiles (BID ID -3043620)

Attar Singh and Sons (BID ID -3051030)

M/S SUNNY ASSOCIATE (BID ID -3051200)

M/S DEVENDRA KUMAR GUPTA (BID ID -3050943)

M/S OMKAR SINGH YADAV (BID ID -3055074)

BOXMARK CONSTRUCTIONS (BID ID -3056063)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3050568)