Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 CrAccepted-Finance | ₹6.0 Cr | L1 | Accepted-Finance Being L1 accepted |
| 2 | L2₹6.2 CrRejected-Finance | ₹6.2 Cr | L2 | Rejected-Finance Being L2 rejected |
Tender Value
₹5.7 Cr
EMD Value
₹11.4 L
Closing Date
9 Jan 2026, 3:00 pmClosed
Executive Engineer WD XXII
WD XXII PWD Fatorda
Illumination of Road Junctions, Play Grounds by Supply and Installation of 9mtr, 12.5mtr, 20mtr High Masts and Beautification of Margao Municipal garden including S I T C Of CCTV System in 31-Margao Constituency.
2025_PWD_26930_1
3/25-26/PWD/WDXXII/MnE/ ASW/TN-25/01 dtd.26.12.2025
Open Tender
Electrical Works
365 days
Margao
Please refer Tender Notice TN-25 dtd 26.12.2025
6 documents required · 6 mandatory
₹25,000
Yes
₹11.4 L
Yes
20 Jan 2026
26 Dec 2025
12 Jan 2026
27 Dec 2025
9 Jan 2026
27 Dec 2025
Supply, installation, testing and commisioning of 9M high mast shaft in Single sections suitable for wind speed 47m/sec. with head frame, luminaries carriage suitable to install upto 6 nos. luminaries in symmetrical arrangement, lightning finial,along with Supply of Accessories required such as double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box etc. Make: Transrail, Valmont, Lysaght.
Supply, installation, testing and commisioning of 12.5M high mast shaft in two sections suitable for wind speed 44m/sec. with head frame, luminaries carriage suitable to install 8 nos. of luminaries in symmetrical arrangement, lightning finial along with Supply of Accessories required such as double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box etc. make: Trainsrail, Valmont, Lysaght.
Supply, installation, testing and commisioning of LED flood light 350Watts luminaire with secondary optics made in pressure die cast alumnium housing with toughened glass and high poweer LED's and secondary lenses with IP66 protection. with 10KV SPDand heat sink for 350W LED, make:,Transrail, Wipro.Havells,Crompton Conforming to UL/ FCC Class A, CE standards. Complete as required as directed by Engineer Incharge.
Supply of foundation bolts 6xM24x850mm manufactured from special steel along with nuts, washers, anchor plates and templates as directed by the engineer incharge.
Supply and installation of LED Single dome aviation obstruction light as directed by the engineer incharge
Supply of outdoor stand mounted feeder pillar IP66 Rated with 32A TPN MCB incomer, single dial timer, 25A cotactor for automatic switching of luminaries .of make L &T/Schneider/Havells /Legrand, power tool control with 2 no. 9A contactors and raise lower push button, incoming 35 sq.mm and outgoing 16 & 2.5Sq.mm terminals with outgoing mcbs 6 nos
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
4 Core 10 sq.mm
4 Core 16 sq.mm
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
4 x 16 Sq. mm.
Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement. (a) In soily strata
Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt).
Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required
Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
3 Core 1.5 sq.mm
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) All types of soil
Rubble packing with hard laterite stone.
Providing and laying cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm nominal size)
All work upto plinth level
Providing and laying in position ready mixed concrete (RMC) High Performance Concrete per MORTH clause 1715 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level M-25 grade of concrete
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
SITC of artistic a set of 3 animals form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated deer shaped sculpture (Male, Female and Baby deer) . These should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Size of the deer should be L20 x W12 x H15 inch (Sitting), L27 x W10 x H28 inch (Without corners), L27 x W10 x H33 inch (With corners). DC24V IP67 LED Driver should be provided seperately. Each animal should be installed on concrete base structure using anchor bolt.
SITC of artistic a set of 3 animals form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated deer shaped sculpture (Male, Female and Baby deer) . These should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Size of the deer should be L27 x W10 x H28 inch (Without corners), L45 x W28 x H48 inch (With corners), L48 x W28 x H60 inch (With corners). DC24V IP67 LED Driver should be provided seperately. Each animal should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Squirrel shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Squirrel should be L22 x 15 x 22 inch. DC24V IP67 LED Driver should be provided seperately. Each animal should be installed on concrete base structure using anchor bolt.of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Rabbit shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Rabbit should be L15 x W13 x H22 inch. DC24V IP67 LED Driver should be provided seperately. Each animal should be installed on concrete base structure using anchor bolt.of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Tiger shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Tiger should be L95 x W16 x H38 inch. DC24V IP67 LED Driver should be provided seperately. Each animal should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Lion shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Lion should be L57 x W14 x H39 inch. DC24V IP67 LED Driver should be provided seperately. Each animal should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated a set of 3 Panda with 8 Nos of Bamboo shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Size of the Panda should be L44 x W17 x H50 inch, L23 x W11 x H14 inch and L13 x W12 x H18 inch. The size of the Bamboo should be Ø4 x H 78 inch. DC24V IP67 LED Driver should be provided seperately. Each animal should be installed on concrete base structure using anchor bolt.of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Peacock shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Size of the Peacock should be L55 x W17 x H51 inch. DC24V IP67 LED Driver should be provided seperately for each animal. Each animal should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic a pair of Birds form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Birds shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These birds forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the birds form.Size of the Birds should be L7 x W5 x H7 inch & L7 x W2 x H3 inch. DC24V IP67 LED Driver should be provided seperately. of make davinci,Sunvin,volga
SITC of artistic of bird form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Parrot shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These birds forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the birds form. Size of the Parrot should be minimum L18 x W6 x H5 inch. DC24V IP67 LED Driver should be provided seperately. of make davinci,Sunvin,volga
SITC of artistic bird form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Crane shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. The sculpture should be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the bird form. Size of the Crane should be L20 x W11 x H27 inch, L23 x W7 x H31 inch, L18 x W14 x H36 inch (wings crane) . DC24V IP67 LED Driver should be provided seperately. Each bird sculpture should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic bird form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Flamingo shaped sculpture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. The sculpture should be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the bird form. Size of the Flamingo should be L27 x W11 x H48 inch and L27 x W11 x H32 inch. DC24V IP67 LED Driver should be provided seperately. Each bird sculpture should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic Insects form to be made in Acrylonitrile butadiene styrene of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired Animatronic Butterfly shaped public lighting fixture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the Insects form. Size of the animatronic Butterfly should be L24 x W16 inch. DC12/24V IP67 LED Driver should be provided seperately. of make davinci,Sunvin,volga
SITC of artistic Insects form to be made in in Acrylonitrile butadiene styrene of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired Animatronic Bee shaped public lighting fixture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the Insects form. Size of the animatronic Bee should L29 x W15. DC12/24V IP67 LED Driver should be provided seperately. of make davinci,Sunvin,volga
SITC of blooming structure to be made of M.S. circular section as per suitable design bent to shape to form artistic shape. Structure to have minimum 4 boughs streched out and further multiple twigs (12-16) to give natural look. Structure to be illuminated by strand of LED Lights (Warm White/Static Pink). Structure to be special coated for corrosion resistance and to be provided by round base plate. Structure to operate at Voltage : AC 220-230V. Wattage of the structure must be 150W-200W LED Lights to have Ingress protection rating (DIN EN 60529): IP65. Height of the structure to be 3 meters and width to be proportionate. of make davinci,Sunvin,volga
Supply, installation, testing & comissioning of 4M artifical Coconut structure with LED Illumination, Input Voltage range should be : AC 110V/220V, Size of the Palm Structure should be minimum 4 Meters in height and 4M in width, Number of Leaf should be minimum 12 Nos and number of Nata should be minimum 8 Nos, Color combination should be Red, Yellow, Green & Blue, Power Consumption of the Palm Structure should not exeed to 95W, Safety class (EN 61140): III, ingress protection rating (DIN EN 60529): IP65, impact resistance level should be suitable to site conditionof make davinci,Sunvin,volga
SITC of artistic floral form to be made of special grade polymer so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be formed in the desired artistic shape of Rose of various colours . This should be artistically installed to create glow and aesthetics to these unique elements of nature. These floral forms to be illuminated using special LED lights embedded inside the polymer to provide effective and natural looking glow. Size of the floral form should have height 700mm with stem and flower diameter 80 mm, Floral elements should be installed using suitable mounting arrangement, Floral elements should be provided with IP67 constant voltage DC12V/DC24V LED Driver.of make davinci,Sunvin,volga
SITC of Stone Finish Decorative radiance globule manufactured by translucent resin material. Fixture to be self glowing to give radiant effect. Size must be diameter of 500-700 mm. Wattage of the luminaire should be 8W-12W, Output of the illumination should be in static warm white color, Input Voltage : AC 230V / DC 24V , Mean rated service life L70(to 25 °C) = 50,000 h. Ingress protection rating (DIN EN 60529): IP65. Glow Balls should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Butterfly Fish shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. This animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Butterfly Fish should be 4 feet x proportionate width. DC24V IP67 LED Driver should be provided seperately. Each Fish should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Starfish shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. This animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Starfish should be 4 feet x proportionate width. DC24V IP67 LED Driver should be provided seperately. Each Fish should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Tortoise shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. This animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Tortoise should be 4 feet x proportionate width. DC24V IP67 LED Driver should be provided seperately. Each Fish should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Conch shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. This animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Conch should be 4 feet x proportionate width. DC24V IP67 LED Driver should be provided seperately for each animal. Each Fish should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired artistic shape of illuminated Fish shaped sculpture. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. This animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. Height of the Jelly Fish should be L24 x W7 x H12 inch. DC24V IP67 LED Driver should be provided seperately. Each Fish should be installed on concrete base structure using anchor bolt. of make davinci,Sunvin,volga
SITC of Semi-Circle shaped walking tunnel with programble dynamic Pixel RGBW LED Ligthing. The structure of the tunnel should be made with MS frame and powder coated finish. The entire tunnel structure should have 10 nos of semi-circle rings with the clear height of 2.5 meters and 25 meters length. Semi-circle rings should be inter-connected to each other for better stability of the strucure. Illumination should be done using dynamic Pixel homogeneous Flexible Linear as per following specifications – IC Integrated Pixel Flexible dotfree linear light, suitable for outdoor application having IP rating IP66, Material should be made of Silicon and other connecting accessories. Wattage : 14-18W/m. Size of the linear should be 16mmx16mm, Rated input supply of AC 220V / DC 24V (external power supply should be provided) . Output color should be Pixel RGB/RGBW with minimum 8 nos of integrated IC, LED Make Similar to : Cree / Osram / Nichia / Lumileds / Seoul, The luminaire should have optics : 120 Degree, Mean rated service life L70(tq 25 °C) = 50,000 h. :Ingress protection rating (DIN EN 60529): IP66. Tunnel structure should be installed on civil foundation.of make davinci,Sunvin,volga
SITC of Decorative Lighting at existing gate with following elements : A) 3D LED Backlit Signages with 60-75mm letters depth, CCT : Warm White/Digital RGB, Ingress Protection : IP65, Size of the letters should be according to length of existing gate. B) Decorative motif in Fish design with two-way display homogenous LED Tube in various colors. C) RGB LED Flood Lights with RF Controller System, Wattage : 50W, Ingress Protection : IP66, Housing : AL Die-cast with toughened glass cover on top.of make davinci,Sunvin,volga
Supply, Installation, Testing and Commissioning of 18W COB type light With IP65 protection.make:,Transrail, Wipro.Havells,Crompton
Supply and installation of 50W flood light fixture With IP65 protection.make:Transrail, Wipro.Havells,Crompton
Supply, Installation, Testing and Commissioning of 50W Post of Lantern fixture with IP65 protection. make:Transrail, Wipro.Havells,Crompton
Supply and drawing following size of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel PVC conduit or casting caping, including dismantling, removing old wire as required 4x1.5 sqmm
Supply, Installation, Testing and Commissioning'LED Strip of light output Warm White of 12watt/mtr & Waterproof Standard:IP 65.davinci,Sunvin,volga
Supply, Installation, Testing and Commissioning of LED Curbstone with Lamp Power:1.2W, Color Temperature:RGB with Lamp Body Material:PE, Input Voltage:DC 12 V at Working Temperature:-40℃ to 110℃ and Waterproof Standard:IP 68davinci,Sunvin,volga
Supply, Installation, Testing and Commissioning4MP IP OUTDOOR BULLET CAMERA (HSN: 85258900) of Make HONEYWELL/ HIKVISION/ DAHUA/ PRAMA
Supply& Installation, CAMERA HOUSING WITH STAND(HSN: 8529)
Supply, Installation, Testing and Commissioning' of 32CH 4K NVR (HSN: 85219020)MAKE HONEYWELL/ HIKVISION/ DAHUA/ PRAMA
Supply, Installation, Testing and Commissioning'8TB SURVEILLANCE HARD DISK make SKYHAWK
Supply, Installation, Testing and Commissioning OF 24PORT GIGABIT MANAGED SWITCH TPLINK SG1428PE HSN: 85176290
Supply, Installation, Testing and Commissioning of 16 PORT GIGA POE TL-SG1218MPE HSN: 85179010 make TP Link
Supply, Installation, Testing and CommissioningTPLINK 8PORT GIGABIT SWITCH SG108E HSN: 85176290
Supply, Installation, Testing and Commissioning'15U WALLMOUNT RACK FULLY HSN: 84733099
supply and Istallation of RACK TRAY NETRACK HSN: 84733099
Supply &Installation, ofPOSINA 400X300X140 GREY JUNCTION BOX HSN: 85381010
FIBRE TO LAN MEDIA CONVERTER SC-S-SMSF-GE SECUREYE HSN: 85176930
Supply, Installation, Testing and Commissioning of 1.5KVA UPS ARTIS HSN: 85044090 of Make POWERSAFE
Supply, Installation, Testing and Commissioning43 INCH TV SAMSUNG BE43 16*7 commercial grade Panel UHD 4K (3840x2160) 250 nits, ( H SN: 852872)
Supplying and drawing of CAT6 UTP ARMOURED CABLE POLYCAB HSN: 85444992
Supply &Installation, of GI POLE FOR CAMERA HSN: 73089090 Apollo Make, 2.5inch dia, with primer and paint
Supplying and drawing of FIBRE OPTIC CABLE ARMOURED FINOLEX HSN: 85446090 12CORE SINGLE MODE
Supply &Installation, of M/S fencing for glow animals with primer & paint
Supply, erection, testing and commissioning of 20mtrs Sports High Mast Lighting System totally hot dip galvanised as per BS EN ISO 1461/ASTM A 123 and suitable for wind speed as per IS : 875 (Part - 3). The Mast shaft shall have cross section of 20 sided polygon and shall be in 2 sections with Base and top diameter 460mm and 150mm with plate thickness 4/3mm respectively and base plate thickness of 25mm. The Mast shall include 8 Nos of foundation bolts of special steel type TS 600 having a diameter 30mm and 850mm long i/c nuts, washers, anchor plates and templates. The Mast shall have terminal box at the base with the door of approx. size 1200mm X 300mm and a Lighting protection finial G.I single spike of approx. length 1200mm. The Mast shall have an integral power tool of 1.5 HP motor capacity and Double Drum Winch installed inside the base compartment for its motorized operation and also a manual handle. It shall also include accessories for High Mast including galvanised Head Frame Assembly/ Lantern Carriage and a 2 point suspension.system.The lantern carriage shall be constructed of material 60 OD/50NB ERW Class B - M.S pipe having carriage ring diameter of approx. 711mm. The Lantern Carriage shall be welded, 2 sections having load carrying capacity of 12 luminaires asymmetrical . It shall also have a Trailing Cable EPR insulated PCP sheathed copper cable of size 5 core 4 sq.mm,3 core PVC insulated PVC sheathed unarmoured copper conductor cable for connecting fittings incl.installation of fittings, Stainless Steel Wire Rope of grade AISI 316, 6mm diameter (7/19 construction), having a breaking load capacity of 2350Kgx2. The High Mast shall be mounted on concrete foundation (Foundation cost to be paid seperately). The High Mast shall be of Make: Transrail, Valmont, Lysaght.
Supply, installation, testing and commisioning of LED flood light 500Watts luminaire with secondary optics made in pressure die cast alumnium housing with toughened glass and high poweer LED's and secondary lenses with IP66 protection. with 10KV SPDand heat sink for 500W LED, make:Atilite,Transrail, Wipro. Conforming to UL/ FCC Class A, CE standards. Complete as required as directed by Engineer Incharge.Transrail, Wipro.Havells,Crompton
Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates as directed by the engineer incharge.
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
3 1/2 Core 25 sq.mm
Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 3.5 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required 3.5 x 25 Sq. mm.
Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
3 Core 2.5 sq.mm
SITC of outdoor type cubical double door panel board with canopy mounted on MS stand. panel board made up of 16 SWG CRCA sheet duly powder coated ,IP 66 Rated and consisting of incomer 3 phase energy meter with mcb - 1 no 125A MCCB - 1 no of make L &T/Schneider/Havells /Legrand outgoing 63A mccb - 6 nos Multi Function Meter RYB Indication lamps
Supplying and fixing of cable junction box of IP5/IP65 with meter knockout for cable entry for cable size 4 sq.mm including all accessories dimension 167 x 125 x 82 of make Hensel
Supplying and fixing B series SP MCB, 240 V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required"
5 A to 32 A, Cat A
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.72 MB
Tendernotice_2.pdf
PDF • 0.86 MB
Tendernotice_3.pdf
PDF • 0.84 MB
Tendernotice_4.pdf
PDF • 0.46 MB
Tendernotice_5.pdf
PDF • 0.21 MB
BOQ_27382.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid