SPECIAL REPAIRS TO COOK HOUSE OF BUILDING NO P-1 (A-1), P-2 (A-1), P-3 (A-1) AT GRN BN UNDER GE (WEST) COLABA.

Amount

Dismantling mangalore pattern or similar tiles in roofing including portions bedded in cement mortar all as specified and directed.

Dismantling battens for tiles, shingles of any size including tiling fillets not exc 15 cm all as specified and directed.

Dismantling timber in scantling 40 sq. cm and over in section, in any position all as specified and directed.

M&L second class hard-wood clean sawn timber in scantlings all as specified and directed.

S&F in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints, 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

M&L in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints, second class hardwood wheather boarding , clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scafoldings of any height all as specified and directed.

M&L pre-painted roof tiles of metal sheet of mangalore tile design profile hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.

S&F hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises all as specified and as directed.

M&L for heavy duty Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and as directed.. Make : Orient/ Kajaria / Johnson.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : Orient/ Kajaria / Johnson.

M&L for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry, pointed in coloured cement to match to match the shades of the tiles, laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Make : Orient/ Kajaria / Johnson. Note:- Rate of Designer border in vertical surface will be deemed into quoted rates.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

M&L for anodized aluminium snap grid of size 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer instruction, the main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size indicated, it shall be 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturers instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size as indicated along if not indicated it shall be 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter all as specified and directed.

M&L 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes all as specified and directed.

All as per Item No 21 above but in riser of steps, skirting, dado and pillar laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L machine Grinding/rubbing/polishing to Kota stone surfaces to mirror finish all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engg-in-Charge.

M&L for RCC work as in columns, beams, slabs, chajja, railing in M-25 grade (Design Mix) using 20 mm gradded nominal size crushed stone aggregate all as specified and directed.

M&L granite (of any colour) 18 - 20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring , window cill, wall cladding including 20 mm thick screed bedding in cement mortar 1: 6 and all other similar works all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces including racking out joints and hacking for key, scrubbing down with water all as specified and directed.

M&L 15mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Ambuja, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (upto 05 storeys of bldgs) including use of scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

Supply only liquid integral waterproofing compound all as specified and directed.

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, Dr Fixit liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying Dr Fixit Fastflex or approved equivalent in two coats at 1.5 kg per Sqm as per Manufacturers specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, Dr Fixit liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying Dr Fixit Fastflex or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications over and including padding of cement concrete Type B1, 1:2:4 (20 mm graded crushed stone aggregate) 40mm average thick on RCC roof surfaces and all other similar works all as specified and directed (DR Fixit New coat or any equivalent) all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed.

M&L for preparetion of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) wall putty all as specified and directed.

M&L for complete removal of existing treatment and and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc primer all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. .

S&F 15 mm dia bore fancy type chromium plated with flange long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and as directed.

S&F stainless steel sink with draining board made out of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia waste fitting overall size 915x460mm with bowl size 410x 330x160 mm all as specified and as directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm diameter of outlet all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, 75mm diameter of outlet all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store 20 mm dia bore all as specified and directed

S&F GI tubing 15 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors bore of pipe 20 mm all as specified and directed.

Cutting chases, pinning in and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth all as specified and directed.

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips all as specified and directed.

S&F PVC (SWR) bends suitable for 75 mm external dia all as specified and directed.

S&F anodised aluminium section for doors, windows, ventilator, door partition including fabrication of frame shutters and fixed with necessary lugs, cleats, rollers, handles, locking arrangement including all necessary accessories such as glazing clips, provn of AC opening and rubber beading for fixing glass beading for fixing glass panes in frame all as specified by Engr-in- charge. Note- (i) Glass panes will be measured and paid separetly. (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clip hinges, handle however it will be not be weighted and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rsate. Make Hindalco/indl/Jindal or equivalent

M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exc 1.50 sqm each all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) area exc 1.50 but n exc. 4.00 Sqm each all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm but n exc 2.00 Sqm all as spcified and directed.

M&L in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as specified and directed.

M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts, end of posts, backs of chowkhats area n. exc. 0.1 sq m each and treated with tar or coal tar black paint all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 35 mm thick 2nd hard wood rail and style plain framed panelled shutters (any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F to chowkhats of 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) all as specified and directed.

S&F mild steel work in hold fasts, wall ties, pintle hinges and all other similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with haps, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised all as specified and directed.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section all as specified and directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled stainless steel all as specified and directed.

S&F 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence, anti borer as per IS -14587 for frame and shutter for kitchen cabinets/Cupboards all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century

S&F 18mm thick UV coating, HDHMR board exterior grade, anti fungal, moisture resistence, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century

S&F in repairs stainless steel cabinet / drawers handle having length of 250mm and shape all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete including fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc.) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed

M&L for Point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, casing caping with accessories and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators with brass screws and brass washers and making good the disturbed surfaces as per existing for one light fan point controlled by one switch all as specified and directed Note :- Switch, socket and fan regulators to be measured and paid for separately .

All as per Srl item No.71 here in before but for socket outlet point 5 Amp on same board.

All as per Srl item No.71 here in before but for socket outlet point 5 Amp on Independent board.

All as per serial item No 71 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point)

S&F socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts all as specified and as directed. Make- Havells/anchor/ Legrand.

S&F switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts all as specified and directed. Make- Havells/anchor/ Legrand.

S&F flush type piano 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, with cover plate all as specified and directed. Make- Havells/anchor/ Legrand.

S&F in repair Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed. Make : Anchor Model No : 98498 or equivalent model in Havells/ Legrand.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet all as specified and directed Make- Havells/anchor/ Legrand.

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified. Make : Cona , Plaza, Anchor .

S&F LED lights fitting 1x 20W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed. Make:- Wipro Garnet Batten 20 W 6500 K or equivalent make of Bajaj/ Havells/ Philips

S&F Wall bracket white type with lamp 10 Watt with necessary connection all as specified and directed Make: Bajaj IVORA BULKHED or equivalent make of Wipro / Havells/ Philips

S&F Exhaust fan 230 volts, 300mm, metallic body including making all electric connection all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall all as specified and directed

M&L refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan painting of ceiling fans in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end, dismantling romoving and hanging fan and blades and removing fan and blades to store all as specified and directed

S&F LED security Building light LED 35 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light all as specified and directed Make Bajaj or equivalent make of Wipro/ Havells/ Philips.

S&F MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down all as specified and directed. Make: Legrand/ Indo Asian/ Havells

S&F MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed including taking down old one all as specified and directed. Make: Legrand/ Indo Asian/ Havells

S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one all as specified and directed. Make: Legrand/ Indo Asian/ Havells

S&F in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting all as specified and directed . Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts all as specified and directed including taking down old one.

M&L in repairs Sub main wiring with two run of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from Panel / Main DB to house SPN DB including taking down old Unsv submain with all associated fixtures all as specified & as directed. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M&L in repairs Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Casing caping ISI marked with all accessories such as Tees, elbows, junction boxes as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring all as specified and directed Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L in repairs Sub main wiring with two run single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Casing capping ISI marked with all accessories such as Tees, elbows, junction boxes as required fixed on wall alongwith one run of 1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring all as specified and directed Note: (i) Two runs of 1.5 sqmm and one run of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level & connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing on completion all as shown in Electrical Plate No 3 of SSR part -I.all as specified and directed

SHREE JAGDISH FURNITURE CO.

Unitech Enterprises

SAI SIDDHI CONSTRUCTION

NATH CONSTRUCTION

Mayur Enterprises

Bidder Name

Unitech Enterprises

Frends Enterprises

Mayur Enterprises

NATH CONSTRUCTION

SHREE JAGDISH FURNITURE CO.

SAI SIDDHI CONSTRUCTION