Loading
Loading…
Loading…
Tender Value
₹1 L
EMD Value
₹2,000
Closing Date
7 Sept 2026, 4:00 pmClosed
Er. Mohd Qasim
Executive Engineer PWD R and B Division Billawar
Please refer in BOQ
2026_PWDJK_322920_1
e-NIT No 76 of 2026-27 dated 31-08-2026
Open Tender
Civil Works
Percentage
60 days
Billawar
Please refer Tender documents
2 documents required · 2 mandatory
₹600
Executive Engineer PWD R and B Division Billawar
₹2,000
8 Sept 2026
31 Aug 2026
8 Sept 2026
31 Aug 2026
7 Sept 2026
31 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: A) 1:3:6 or richer mix (i/c equivalent design mix) | 0.34 | Cum | 1,725.2 | ₹586.57 |
| 2Engaging of Carpenter,Helper and Labour for dismentling wood work and CGI sheet including shifting and stacking of material with all leads and lifts.(LMR) | |||||
| 2.01 | Carpenter | 1 | no. | 1,000 | ₹1,000 |
| 2.02 | Helper | 1 | no. | 700 | ₹700 |
| 2.03 | Labour | 4 | no. | 500 | ₹2,000 |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:a)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 0.34 | Cum | 5,733.6 | ₹1,949.42 |
| 4 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 56.69 | Sqm | 706.5 | ₹40,051.49 |
| 5 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. A)Welded | 384 | kg | 138.2 | ₹53,068.8 |
| 6Carriage of material by Mechanical Transport/headload including loading / unloading and stacking at site complete. | |||||
| 6.01 | Sand for an average lead of 65 km by M.T and 50 mtr by H.L. | 0.16 | Cum | 1,107.41 | ₹177.19 |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.30 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.52 MB
BOQ_1085439.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .