IMPLEMENTATION OF SSCL PROJECT FOR UNDERGROUNDING OF HT/LT LINE, INSTALLATION OF COMPACT SUB-STATION (CSS) AND REPLACEMENT OF CONSUMER SERVICE CONNECTIONS UNDER SMART CITY MISSION (SCM) IN SAHARANPUR CITY

Sch-1-Laying of 33 kV Underground Armoured Cable, 3CX400 Sq. mm. XLPE Cable Double Circuit

Supply of 33 kV 3x400 mm2 XLPE armoured cable

Heat Shrinkable termination jointing kit outdoor for 33 kV 3x400 Sq. mm. XLPE Cable

Heat Shrinkable Cable jointing kit straight through for 33 kV 3x400 Sq. mm. XLPE Cable

Supply of 160 mm dia. HDPE PE80 PN6 pipe (double run)

Supply of 200 mm dia. HDPE PE80 PN6 pipe (double run)

Supply of R.C.C. Pipe 150 mm dia. 2 mtr. length double pipe in open trenches

Sch-2-Laying of 11 kv Underground Armoured Cable , 3CX300 Sq. mm. XLPE Cable Double circuit for 11kV feeder

Supply of 11 kV 3x300 mm2 XLPE armoured cable

Heat Shrinkable termination jointing kit outdoor for 11 kV 3x300 Sq. mm. XLPE Cable

Heat Shrinkable Cable jointing kit straight through for 11 kV 3x300 Sq. mm. XLPE Cable

Supply of 160 mm dia. HDPE PE80 PN6 pipe (double run)

Supply of 200 mm dia. HDPE PE80 PN6 pipe (double run)

Supply of R.C.C. Pipe 150 mm dia. 2 mtr. length double pipe in open trenches

Sch-3-Laying of 11 kv Underground Armoured Cable, 3CX120 Sq. mm. XLPE cable Single Circuit (for Connecting DTs/branches)

Supply of 11 kV 3x120 mm2 XLPE armoured cable

Heat Shrinkable Cable jointing kit outdoor for 11 kV 3x120 Sq. mm. XLPE Cable

Supply of 160 mm dia. HDPE PE80 PN6 pipe

Supply of 200 mm dia. HDPE PE80 PN6 pipe

Sch-4-Ring Main Unit (SF - 6 SCADA Compatible) (2 Isolators + 2 Breaker) for 11kV feeder

11 kV Ring Main Unit SF - 6 Type (2 Isolators + 2 Breaker)

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x120 Sq.mm. cable size

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x300 Sq.mm. cable size

Sundries such as N/B, Washers, Welding etc.

FRTU with multi-function transducer (MFT), contact multiply relay (CMR), heavy duty relay (HDR), modem and its integration with the existing system

Sch-5-Ring Main Unit (SF - 6 SCADA Compatible) (2 Isolators + 3 Breaker) for 11kV feeder

11 kV Ring Main Unit SF-6 Type (2 Isolators + 3 Breaker)

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x120 Sq.mm. cable size

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x300 Sq.mm. cable size

Sundries such as N/B, Washers, Welding etc.

FRTU with multi-function transducer (MFT), contact multiply relay (CMR), heavy duty relay (HDR), modem and its integration with the existing system

Sch-6-Conversion of L.T. Overhead Lines into Underground Lines by Single LT Armoured 4Cx240 sq.mm XLPE Cable

Supply of 4Cx240 sq.mm 1100 V Grade, PVC sheathed steel strip armoured, aluminum conductor LT XLPE insulated cable.

Cable end termination using gland and Al. Lugs (4 nos per set) of suitable size along with all accessories

Heat Shrinkable jointing kit straight through for LT 4Cx240 Sq. mm. XLPE Cable

Supply of 160 mm dia. HDPE PE80 PN6 pipe

Supply of 200 mm dia. HDPE PE80 PN6 pipe

Sch-7-Laying of LT Underground Lines by Single LT Armoured 4Cx95 sq.mm XLPE Cable

Supply of 4Cx95 sq.mm 1100 V Grade, PVC sheathed steel strip armoured, aluminum conductor LT XLPE insulated cable.

Cable end termination using gland and Al. Lugs of suitable size (4 nos per set) along with all accessories

Heat Shrinkable jointing kit outdoor type for LT 4Cx95 Sq. mm. XLPE Cable

Supply of 110 mm dia. HDPE pipe or Flexible HDPE Pipe, as per site requirement by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless)

R.C.C. Pipe 150 mm dia 2 M

Supply of 110 mm dia. HDPE pipe for connecting B to C

Sch-8-LT Distribution Boxes (A-Type)

Supply LT Distribution Box, TP & N , 3 phase ,415 v , 400 Amps incoming rating type suitable for outdoor installation , in accordance with Technical Specification ( A type) for 500 KVA DTR

GI pipe 50mm dia and bentonite clay (for Earthing)

G.I.Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

Sch-9-LT Distribution Boxes (B-Type)

Supply of 6 – way Distribution feeder pillar, TP & N , 3 phase ,415 v , 315 Amps incoming rating type suitable for outdoor installation , in accordance with Technical Specification ( B type)

GI pipe 50mm dia and bentonite clay (for Earthing)

G.I.Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

Sch-10-LT Distribution Boxes (C-Type)

Supply of 3-ph 415 V, Distribution Service Pillar for LT (Type-C), 100 Amp Incoming 4 nos 32 Amp, TPN 12 Nos 16 Amp SPN Rating Feeder Type Distribution Service Pillar suitable for Outdoor Installation.

GI pipe 50mm dia and bentonite clay (for Earthing)

G.I.Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

GI/Steel Structure to mount box above 1 mtr. from Plinth Level

Sch-11-Single Core 1C X 630 sq mm armoured Cable For LT Distribution Box on DTs (500 KVA)

Supply of LT XLPE Insulated, armoured Aluminium Single Core Cable, 1X630 sq. mm

Cable end termination using gland and Bimetallic Lugs (4 nos per set) of suitable size along with all accessories

Sch-12-Service Cable from Type-C Box to consumer

PVC LT 4X25 sq. mm. armoured Service Cable for three phase consumers

PVC LT 4X16 sq. mm. armoured Service Cable for three phase consumers

PVC LT 2X10 sq. mm. armoured Service Cable for single phase

PVC LT 2X6 sq. mm. armoured Service Cable for single phase

PVC pipe heavy gauge 50 mm dia (underground area)

Three phase Meter box

Single phase Meter box

Three phase energy meter (10-60A) with meter box

Single phase energy meter (10-60A) with meter box

Sch-13-Construction of Cable Duct with pavement for HT & LT Cables

Supply, installation, testing and commissioning of Injection Moulded Plastic cable Duct /Trays / channel - Length per pc/per mtr-1000 mm (appx), W idth (Internal / External)- 240 mm/340 mm, Height (Internal/External)-155mm/230mm, Tolerance +/- 1%, Minimum W eight – Top & Bottom –8.0 Kg , Material- Polyolefin – Engineering Plastic , Fire Protection Class K 1 in accordance with DIN 53438 part-2, Breaking Load->12 KN at room Temperature with one separator and other necessary technical parameters to carry Electrical cables as required complete with all accessories. the manufacturer of injection moulded cable tray must have manufacturing and supplying experience of minimum 3 years

Sch-14-Construction of RCC cable trench for HT & LT Cables

Cable Trays 2.5 Mtr. X 6" W

GI angle 50x50x6 mm

Sch-15-Double pole structure for 33KV, 11 KV & LT, for exposure of cable at section end

Steel Tubular Pole SP 72 13mtr.

Steel Tubular Pole SP 55 11mtr.

G.I. Channel 100x50x6 x2240 mm

G.I. Channel 75x40x6 x mm

G.I. angle 50x50x6 mm

GI Strip 50 x 6 mm for DTR neutral earthing

11 kV Pin Insulators polymeric with pin

33 kV Pin Insulators polymeric with pin

11 kV Disc Insulator polymeric with fitting (45KN)

33 kV Disc Insulator polymeric with fitting (70KN)

12 kV 9 KA Lightening arrestor

H.T. Stay Set Complete with stay wire and other accessories

GI pipe 50 mm dia , 3m length for installation of earthing system

Bentonite Clay

Danger Board with clamps and nut-bolt

Supply of 150mm dia GI Pipe with Height of 3mtr. With clamps nut and bolts

G.I. Strip (25 X 3 mm)

G.I. Barbed Wire `A' type.

ACSR Dog conductor for jumpering

Sundries such as N/B, Washers, Welding etc.

Sch-16-Compact type Distribution Transformer Sub-station 500 KVA, 11/0.43 KV

Distribution Transformer 11/0.43KV 500 KVA Oil immersed Compact type Sub-station

LT incoming panel with metering equipment and fixing arrangement

GI pipe 50 mm dia , 3m length for installation of earthing system

Bentonite Clay

Danger Board with clamps and nut-bolt

G.I. Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

Sch-17-Compact type Distribution Transformer Sub-station 500 KVA, 11/0.43 KV (Trolly mounted)

Distribution Transformer 11/0.43KV 500 KVA Oil immersed Compact type Sub-station

Trolly mounting complete with trolly, base for transformer, structures to support cables etc.

Danger Board with clamps and nut-bolt

G.I. Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

Sch-18-Compact type Distribution Transformer Sub-station 250 KVA, 11/0.43 KV

Distribution Transformer 11/0.43KV 250 KVA Oil immersed Compact type Sub-station

LT incoming panel with metering equipment and fixing arrangement

GI pipe 50 mm dia , 3m length for installation of earthing system

Bentonite Clay

Danger Board with clamps and nut-bolt

G.I. Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

Sch-22-Cable Fault Locating Van

Fully built Cable Fault Locating Van mounted with HV/LV testing set with control unit

Sch-1-Laying of 33 kV Underground Armoured Cable, 3CX400 Sq. mm. XLPE Cable Double Circuit

Heat Shrinkable termination jointing kit outdoor for 33 kV 3x400 Sq. mm. XLPE Cable

Heat Shrinkable Cable jointing kit straight through for 33 kV 3x400 Sq. mm. XLPE Cable

Laying of 160/200 mm dia. HDPE (double run) pipe in open trenches

Laying of 160/200 mm dia. HDPE (double run) pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless)

Laying of 160/200 mm dia. Manual mouling as per site condition, for underground piping (trenchless)

Laying of R.C.C. Pipe 150 mm dia. 2 mtr. length double pipe in open trenches

Laying of 3x400 Sq. mm 33 kV XLPE insulated cable underground in Ducts

Laying of 3x400 Sq. mm 33 kV XLPE insulated cable underground in HDPE Pipe & RCC Pipe

Sch-2-Laying of 11 kv Underground Armoured Cable , 3CX300 Sq. mm. XLPE Cable Double circuit for 11kV feeder

Heat Shrinkable termination jointing kit outdoor for 11 kV 3x300 Sq. mm. XLPE Cable

Heat Shrinkable Cable jointing kit straight through for 11 kV 3x300 Sq. mm. XLPE Cable

Laying of 160/200 mm dia. HDPE (double run) pipe in open trenches

Laying of 160/200 mm dia. HDPE (double run) pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless)

Laying of 160/200 mm dia.HDPE pipe by Manual mouling as per site condition, for underground piping (trenchless)

Laying of R.C.C. Pipe 150 mm dia. 2 mtr. length double pipe in open trenches

Laying of 3x300 Sq. mm 11 KV XLPE insulated cable underground in Ducts

Laying of 3x300 Sq. mm 11 KV XLPE insulated cable underground in HDPE Pipe & RCC Pipe

Sch-3-Laying of 11 kv Underground Armoured Cable, 3CX120 Sq. mm. XLPE cable Single Circuit (for Connecting DTs/branches)

Heat Shrinkable Cable jointing kit outdoor for 11 kV 3x120 Sq. mm. XLPE Cable

Laying of 160/200 mm dia. HDPE pipe in open trenches

Laying of 160/200 mm dia. HDPE pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless)

Laying of 160/200 mm dia.HDPE pipe by Manual mouling as per site condition, for underground piping (trenchless)

Laying of 3x120 Sq. mm 11 KV XLPE insulated cable underground in Ducts

Laying of 3x120 Sq. mm 11 kV XLPE insulated cable underground in HDPE Pipe

Sch-4-Ring Main Unit (SF - 6 SCADA Compatible) (2 Isolators + 2 Breaker) for 11kV feeder

11 kV Ring Main Unit SF - 6 Type (2 Isolators + 2 Breaker)

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x120 Sq.mm. cable size

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x300 Sq.mm. cable size

Foundation Structure for RMU for Cable Entry Etc.(Concrete 1:3:6)

Earthing with GI pipe and bentonite clay

Sundries such as N/B, Washers, Welding etc.

FRTU with multi-function transducer (MFT), contact multiply relay (CMR), heavy duty relay (HDR), modem and its integration with the existing system

RMU Fencing as per REC standard specification complete with material & labour

Sch-5-Ring Main Unit (SF - 6 SCADA Compatible) (2 Isolators + 3 Breaker) for 11kV feeder

11 kV Ring Main Unit SF-6 Type (2 Isolators + 3 Breaker)

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x120 Sq.mm. cable size

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x300 Sq.mm. cable size

Foundation Structure for RMU for Cable Entry Etc.(Concrete 1:3:6)

Earthing with GI pipe and bentonite clay

Sundries such as N/B, Washers, Welding etc.

FRTU with multi-function transducer (MFT), contact multiply relay (CMR), heavy duty relay (HDR), modem and its integration with the existing system

RMU Fencing as per REC standard specification complete with material & labour

Sch-6-Conversion of L.T. Overhead Lines into Underground Lines by Single LT Armoured 4Cx240 sq.mm XLPE Cable

Cable end termination using gland and Al. Lugs (4 nos per set) of suitable size along with all accessories

Heat Shrinkable jointing kit straight through for LT 4Cx240 Sq. mm. XLPE Cable

Laying of 160/200 mm dia. HDPE pipe in open trenches

Laying of 160/200 mm dia. HDPE pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless)

Laying of 160/200 mm dia.HDPE pipe by Manual mouling as per site condition, for underground piping (trenchless)

Laying of 4Cx240 sq.mm LT XLPE insulated cable underground in Ducts

Laying of 4Cx240 sq.mm LT XLPE insulated cable underground in HDPE Pipe

Sch-7-Laying of LT Underground Lines by Single LT Armoured 4Cx95 sq.mm XLPE Cable

Cable end termination using gland and Al. Lugs of suitable size (4 nos per set) along with all accessories

Heat Shrinkable jointing kit outdoor type for LT 4Cx95 Sq. mm. XLPE Cable

Laying of 4Cx95 sq.mm LT XLPE insulated cable underground in Ducts & HDPE Pipes

Laying of 110 mm dia. HDPE pipe or Flexible HDPE Pipe, as per site requirement by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless)

Laying of 110 mm dia. HDPE pipe or Flexible HDPE Pipe, as per site requirement by Manual mouling as per site condition, for underground piping (trenchless)

R.C.C. Pipe 150 mm dia 2 M

Laying of 110 mm dia. HDPE pipe for connecting B to C

Excavation and reinstatement of stairs/floor/other structure on consumer side for laying of HDPE pipe (110mm dia)

Sch-8-LT Distribution Boxes (A-Type)

Erection of LT Distribution Box, TP & N , 3 phase ,415 v , 400 Amps incoming rating type suitable for outdoor installation , in accordance with Technical Specification ( A type) for 500 KVA DTR

Earthing with GI pipe 50mm dia and bentonite clay

G.I.Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

Concreting ratio 1:4:8 for plinth

Sch-9-LT Distribution Boxes (B-Type)

Erection of 6 – way Distribution feeder pillar, TP & N , 3 phase ,415 v , 315 Amps incoming rating type suitable for outdoor installation , in accordance with Technical Specification ( B type)

Earthing with GI pipe 50mm dia and bentonite clay

G.I.Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

Concreting ratio 1:4:8 for plinth

Sch-10-LT Distribution Boxes (C-Type)

Erection of 3-ph 415 V, Distribution Service Pillar for LT (Type-C), 100 Amp Incoming 4 nos 32 Amp, TPN 12 Nos 16 Amp SPN Rating Feeder Type Distribution Service Pillar suitable for Outdoor Installation.

Earthing with GI pipe 50mm dia and bentonite clay

G.I.Strip (25 X 3 mm)

Sundries such as N/B, Washers, Welding etc.

GI/Steel Structure to mount box above 1 mtr. from Plinth Level

Concreting ratio 1:4:8 for plinth

Sch-11-Single Core 1C X 630 sq mm armoured Cable For LT Distribution Box on DTs (500 KVA)

Laying of LT XLPE Insulated, armoured Aluminium Single Core Cable, 1X630 sq. mm

Cable end termination using gland and Bimetallic Lugs (4 nos per set) of suitable size along with all accessories

Sch-12-Service Cable from Type-C Box to consumer

PVC LT 4X25 sq. mm. armoured Service Cable for three phase consumers

PVC LT 4X16 sq. mm. armoured Service Cable for three phase consumers

PVC LT 2X10 sq. mm. armoured Service Cable for single phase

PVC LT 2X6 sq. mm. armoured Service Cable for single phase

PVC pipe heavy gauge 50 mm dia (underground area) with laying

Three phase Meter box

Single phase Meter box

Three phase energy meter (10-60A) with meter box

Single phase energy meter (10-60A) with meter box

Back-filling and restoration of finished surfaces within consumer premises.

Sch-13-Construction of Cable Duct with pavement for HT & LT Cables

Excavation for foundation in soft soil including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling, ramming, watering, shoring and strutting etc. complete. as directed.

Providing dry trap/rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Installation, testing and commissioning of Injection Moulded Plastic cable Duct /Trays / channel - Length per pc/per mtr-1000 mm (appx), W idth (Internal / External)- 240 mm/340 mm, Height (Internal/External)-155mm/230mm, Tolerance +/- 1%, Minimum W eight – Top & Bottom –8.0 Kg , Material- Polyolefin – Engineering Plastic , Fire Protection Class K 1 in accordance with DIN 53438 part-2, Breaking Load->12 KN at room Temperature with one separator and other necessary technical parameters to carry Electrical cables as required complete with all accessories. the manufacturer of injection moulded cable tray must have manufacturing and supplying experience of minimum 3 years

Pavement- Reinstatement/Restoration Charges for Paver Block Road

Conveyance charges for machinery (Tippers/Trucks) for transporting of excess excavated earth/muck for disposal to a designated location as directed by the Engineer in charge. Rate includes loading, un loading and idle hire charges of machinery.

Placing of RCC M-20 Manhole Chambers of size 2000 mm x 2000 mm Dimension x 1000mm Height & 100 mm wall thickness (Heavy Duty) with Concrete Cover of 100 mm thickness in the trench/trenchless.

Sch-14-Construction of RCC cable trench for HT & LT Cables

Excavation for foundation in soft soil including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling, ramming, watering, shoring and strutting etc. complete. as directed.

Providing dry trap/rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Prov. and casting R C C M-20 with proper openings on side wall for emanating cables. Also, provision for openings for water draining through existing nallah/drains by providing proper connection with RCC trench and also providing openings at bottom for proper seeping of water.

Prov. and fixing steel reinforcement

Providing internal cement plaster 20mm thick in two coat, 1;4 without neeru finish to brick masonry or concrete surface in all positions including scaffolding, racking out joints, providing groove at joints of stone masonry and concrete members and curing etc. complete.

Providing and fixing required size reinforced cement concrete cover of approved quality and make, 10cm thick over manhole and inspection chamber including mild steel reinforcement, curing testing etc. complete. With proper opening for emanating cables.

Cable Trays 2.5 Mtr. X 6" W

GI angle 50x50x6 mm

Conveyance charges for machinery (Tippers/Trucks) for transporting of excess excavated earth/muck for disposal to a designated location as directed by the Engineer in charge. Rate includes loading, un loading and idle hire charges of machinery.

Placing of RCC M-20 Manhole Chambers of size 2000 mm x 2000 mm Dimension x 1000mm Height & 100 mm wall thickness (Heavy Duty) with Concrete Cover of 100 mm thickness in the trench/trenchless.

Sch-15-Double pole structure for 33KV, 11 KV & LT, for exposure of cable at section end

Steel Tubular Pole SP 72 13mtr.

Steel Tubular Pole SP 55 11mtr.

G.I. Channel 100x50x6 x2240 mm

G.I. Channel 75x40x6 x mm

G.I. angle 50x50x6 mm

GI Strip 50 x 6 mm for DTR neutral earthing

11 kV Pin Insulators polymeric with pin

33 kV Pin Insulators polymeric with pin

11 kV Disc Insulator polymeric with fitting (45KN)

33 kV Disc Insulator polymeric with fitting (70KN)

12 kV 9 KA Lightening arrestor

H.T. Stay Set Complete with stay wire and other accessories

Earthing with GI pipe 50 mm dia , 3m length with installation of earthing system

Bentonite Clay

Danger Board with clamps and nut-bolt

Erection of 150mm dia GI Pipe with Height of 3mtr. With clamps nut and bolts

G.I. Strip (25 X 3 mm)

G.I. Barbed Wire `A' type.

Grouting and muffing of steel pole as per specification

Painting of Supports & fabricated materials

ACSR Dog conductor for jumpering

Sundries such as N/B, Washers, Welding etc.

Sch-16-Compact type Distribution Transformer Sub-station 500 KVA, 11/0.43 KV

Distribution Transformer 11/0.43KV 500 KVA Oil immersed Compact type Sub-station

LT incoming panel with metering equipment and fixing arrangement

Earthing with GI pipe 50 mm dia, 3m length with installation of earthing system,

Bentonite Clay

Plinth for transformer

Danger Board

G.I. Strip (25 X 3 mm)

DT Fencing as per REC standard specification complete with material & labour

Sundries such as N/B, Washers, Welding etc.

Sch-17-Compact type Distribution Transformer Sub-station 500 KVA, 11/0.43 KV (Trolly mounted)

Distribution Transformer 11/0.43KV 500 KVA Oil immersed Compact type Sub-station

Trolly mounting complete with trolly, base for transformer, structures to support cables etc.

Danger Board

G.I. Strip (25 X 3 mm)

DT Fencing as per REC standard specification complete with material & labour (to be done on trolly)

Sundries such as N/B, Washers, Welding etc.

Sch-18-Compact type Distribution Transformer Sub-station 250 KVA, 11/0.43 KV

Distribution Transformer 11/0.43KV 250 KVA Oil immersed Compact type Sub-station

LT incoming panel with metering equipment and fixing arrangement

Earthing with GI pipe 50 mm dia, 3m length with installation of earthing system,

Bentonite Clay

Plinth for transformer

Danger Board

G.I. Strip (25 X 3 mm)

DT Fencing as per REC standard specification complete with material & labour

Sundries such as N/B, Washers, Welding etc.

Sch-19-Excavation of earth for laying of U/G cable refilling, road reinstatement and debris/muck to be cartage at designated site (Earth work excavation in ordinary soils by manual means all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, dewatering, seigniorage, etc. complete for finished item of work for following types of trench.)

Type-1: 1000mm and 1000mm

Pits for HDD, foundations etc.

Conveyance charges for machinery (Tippers/Trucks) for transporting of excess excavated earth/muck for disposal to a designated location as directed by the Engineer in charge. Rate includes loading, un loading and idle hire charges of machinery.

Road Reinstatement/Restoration Charges for Bitumen Road

Road Reinstatement/Restoration Charges for Paver Block Road

Road Reinstatement/Restoration Charges for RCC Road

Sch-20-Dismantling and cartage of HT Lines/transformers

Conductor

Dismantling of DT and its cartage

Pin Insulators

Disc insulator

Cross arm/ channel

Poles (ST/PCC/RSJ)

Sch-21-Dismantling and cartage of LT Lines/disconnections

Conductor

LT Insulator

LT Cross arm

Poles(ST/PCC/RSJ)

Service cable disconnections (No.)

Sch-23-Traffic Management, Other restorations and Safety Measures

Fabrication and erection of MS barricades of size 2.5m long x 2.0m height on both sides of the cable trench alignment of total length (5x500x2=5000mts) including cost of materials and fabrication charges, all materials/equipment required for fabrication, transportation to site, shifting of barricades from one place to another with all incidental charges, leads, lifts and all taxes and duties as applicable from time to time as specified by Engineer-in-charge (considering 5 operational areas within the package at any given point of time & 500m length of barricade per operational area)

Providing of LED strip lighting to MS barricades towards road side as a safety measure during night hours, including cost of LED strips and other materials/equipment required for fixing and illumination of LED strips, shifting of LED strips from one place to another with all incidental charges, leads lifts and all taxes and duties as applicable from time to time as specified by Engineer-in-charge (considering 5 operational areas within the package at any given point of time & 500m length of barricade on road side per operational area)

Installation of caution/sign/diversion boards as per IRC specifications (SP 52) on both upstream and downstream sides of operational area; 6 nos. for each 500 mts of operational area by segment for total length of UG cable trench (considering reuse of each board for 5 times), including cost of boards and other materials required for fixing, shifting charges from one place to another with all incidental charges leads, lifts and all taxes and duties as applicable from time to time as specified by Engineer-in-charge

Providing of traffic wardens along operational areas near to junctions/intersections in 100 locations; 2 persons for each location per 8 hours shift for 21days including cost of labour and all statutory regulations and all incidental charges, leads, lifts and all taxes and duties as applicable from time to time as specified by Engineer-in-charge

Discharge rod for discharging lines (overhead) while execution of work, discharging to be done only after confirmation of opening of breakers at sub-stations

Restoration works - Other Items

Manhole

Other Utility ducts

Water and drainage

Telecom

Replacement cost of Other Structures (part of boundary walls, kiosk's shop, base of handpump, signages etc with Plain cement concrete of M15 Grade (1;2.5:5) (Machine mixing) corresponding to IS 456 using MIXER with 40mm size graded machine crushed hard granite metal (40mm, 20mm & 10mm size)(Coarse aggregate) from approved quarry and Brick masonary in CM 1:5 using well burnt country bricks/Fly-ash bricks (as per the requirement) including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges machine mixing, laying concrete, curing etc., complete charges for finished item of work

CAPITAL ELECTECH PVT LTD