Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC BALSUA P O JHAKOLARI PATHANKOT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹30.3 L+₹72,767.50 (2.46%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L2 | Rejected-Finance Being not a lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) PATHANKOT
GE (WEST) PATHANKOT
REPAIRS TO CHAJJAS PARAPETS FASCIA ROOF PLASTER JOINERY AND CONNECTED ITEMS IN OTM ACCN IN ZONE A UNDER AGE BR-II OF GE (WEST) PATHANKOT
2022_MES_529459_1
GE/PKT-15/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE (WEST) PATHANKOT
Please refer tender documents
9 documents required · 9 mandatory
₹500
GE (WEST) PATHANKOT
₹60,000
Yes
27 Aug 2022
8 Jun 2022
20 Jul 2022
8 Jun 2022
19 Jul 2022
23 Jun 2022
9 Jun 2022 - 18 Jun 2022
60 days
Amount
Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1 sqm above but not exc 2 sqm each and removing from site complete all as specified and directed.
S & F of pressed steel frame made out of 1.25mm thick MS Sheets of section of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed
S & F of pressed steel frame made out of 1.25mm thick MS Sheets of section of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
M & L for cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed plates for securing hold fasts & back filling of hollow portion of chowkats etc complete all as specified and directed.
S&F factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S & F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F of factory made 35mm thick of 2nd class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain ,chamfered or rounded. fitted with cut and mitered beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, kiln seasoned, chemically pressure treated complete all as specified and directed.
S&F of Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
S&F of Factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,2nd class HW rail and style complete all as specified and directed.
S&F of Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed
S & F of anodised aluminum frame for partition / doors / windows / ventilators etc with one or more rebates including joining cleat for fixing etc including taking down old frames with shutters complete all as specified and directed.
S & F of anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos 150 mm size , hinges 3 Nos, 100 mm size, type B-21, anodised aluminum snap beading screws in each shutter etc. complete all as specified and directed.
S & F of anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1No.) for each shutter complete all as specified and directed
S & F of sheet glass 4.8 mm thick, ordinary quality and glazing in Aluminium shutter in square n exc 0.5 sq. m in each pane complete all as specified and directed
S & F of sheet glass 4.8 mm thick, ordinary quality and glazing in Aluminium shutter in square exc 0.5 sq. m in each pane complete all as specified and directed
S & F of anodised designer grill (weight of grill shall not less than 2.00 KG/Sqm) of 07mm dia and aperture of 75mmx75mm fixed with and including aluminum flat section of size 50 x 1.5 mm fixed to aluminium windows complete all as specified and as directed.
S&F in repairs for Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium (Diecast) body complete all as specified and directed.
Supply and fixing in repair of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed
S & F of butt hinges medium weight 100 mm cold rolled mild steel complete all as specified.
S & F in repair butt hinges medium weight 100 mm cold rolled mild steel complete all as specified.
S & F 250mm long Aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed
S & F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding to steel frames as required at site complete all as specified and directed.
S&F 200mm long aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
S & F 150mm long Extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S &F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
S & F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
M & L for block board 18/19 mm thick, grade 2 quality, interior grade, commercial type as in cupboard shelves, shutters, cabinets etc. complete all as specified and directed
M & L for decorative laminates 0.9mm thick type I, or surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.
S&F of 100mm long Hasp & staple, safety type, aluminum anodised with hinge pin including bolt to hinge plate with screws complete all as specified and directed.
S & F of Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
All as per srl item No 34 above but 20mm bore Steel water tubing.
S & F of 15 mm bore Steel water tubing 'medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S & F of 20 mm bore Steel water tubing 'medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Re-fixing 15mm bore old steel water tubing with all new GI fittings etc in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed.
Re-fixing 20 mm bore old steel water tubing with all new GI fittings etc in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.
Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings or PVC sheet in roof including ridges, sunshades or any position etc complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering from sunshades etc complete all as specified and directed.
S & F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sunshades ,roof covering, cladding to wall etc fixed with self tapping screws complete all as specified and directed.
S & F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and as in ridge etc fixed with self-tapping screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for including grills, door, truss, gate, rafters, purlins etc complete all as specified and directed.
Dismantling timber scantlings 40sqcm and over in section, in any position as in wooden trusses in framed work of any description complete all as specified and directed.
S&F of Rolled structural mild steel any type hollow section as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; and supports to roof covering, sun-shades,vertical poles etc fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed.
S & F of mild steel work in tubular trusses (framed) /rectangular hollow section, purlines and fastening including distance pieces etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.
S&F of Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; railings; framework of water tanks ,framed and hung as in steel gates including pintle hinges, stops,hand-made sliding bolts etc and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed.
S & F of mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed
Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain etc complete all as specified and directed.
M & L for burnt clay brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed.
All as per srl item No 54 above but on other than fair faces.
M&L for 10 mm thick rendering on brick work or concrete surfaces in CM 1:3 as in ceiling of roof slab ,fin, facia, culvert, chajjas, parapet and similar article etc finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M & L for preparation of newly plastered surfaces of wall and applying two coats of Cement Base Paint over and including one coat of alkali resistant priming paint complete all as specified and directed.
Material and labour for preparing of new plasterd wall surfaces and applying of two coats of old bound distemper over and including a coat of primer using chalk whiting etc complete all as specified and as directed.
Demolition of existing roof treatment of any description such as worm out tarfelt, mortar of any description & any thickness, shrubs/roots ,vegetation, tree, terracing pcc/brick tiles, concrete bedding etc as directed and Cleaning of all foreign material debris etc by brushing and dusting, washing down with water etc ,surface shall be leveled with a layer of 20 mm thick screed bed in CM 1:4 including mixed with water proofing admixture as per manufacturer's instructions and applying roof treatment with 03mm thick APP modified membrane with non-woven polyster reinforcement(center core) with thermal insulation with plane finish on upper side of weight not less than 3.5 kg/sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side as per manufacturer's instructions over one coat of approved cold applied bituminous oil based primer (IS-3384) @0.30 litre/sqm complete all as specified and directed
Demolition of RCC of any description slab , shelves , chajjas, water tank ,chullah hoods etc and in any position including cutting reinforced as required complete all as specified .
M & L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished surfaces of concrete complete all as specified and directed.
M & L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.
M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for preparation of old painted steel surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repairs for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repairs for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repairs for PVC (SWR) bends ISI marked any radius 75mm dia complete all as spd and directed.
S&F in repairs for PVC (SWR) bends ISI marked any radius 110mm dia complete all as spd and directed.
S & F of 2 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed.
S & F in repairs of 2 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed.
Disconnecting existing tanks (PVC/RCC) of capacity exc 250 & not exc 500 liters, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position & Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified
S & F of Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old PVC/RCC water tanks complete all as specified.
S & F of Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old PVC/RCC water tanks complete all as specified and directed.
S & F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic ball screwed for iron pipe & fixed complete all as specified and directed. (Min. weight 20mm-210 gms)
S & F in repair for gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed.
M&L for Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed
S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S & F of figured Sheet glass, pin head type or-dinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane , 3.0 mm thick complete all as specified and directed
M&L for preparation of newly wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F of second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sqcm and not exc 25 Sqcm including taking down old fillets complete all as specified and directed.
Supply only liquid water proofing compound all as specified and as directed.
M & L for repairing to chajjas, roof projection and facias of exposed reinforcement surface or damaged loose RCC surface including cutting down rusted/exposed reinforcement and applying one coat of cement slurry and filling with cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) and finished with cement mortar 1:3 using coarse sand. Thickness of RCC member not exc 150 mm including scaffolding up to 8.0m height complete all as specified and as directed . Note : No extra rates of scafffolding will be paid separately against this item.
M&L for Dismantling of wall and ceiling boards (fibre, plup, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S & F of anodised aluminium snap grid frame work for suspended false ceiling system, grid section size 600mm x 600mm comprising of GI powder coated Main 'T'(Runner) of dimensions 25mm x 35mm x 0.7mm thick (suspended from the soffit @1200mm c/c with level clip) Cross Tee of dimensions 25mmx35mmx0.7mm thick (inserted fixed into the slots of cross "T" @ 600mm to form a grid of 600 x 600 mm) and wall angle 25mmx25mmx 0.7mm thick with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed textured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers (@ 1200mm c/c to hold the main "T") fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip) hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed
M&L for fixing in repair for asbestos cement plain building boards fixed or laid/ inserted to timber/GI/Alumi nium/iron framework with screws complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M & L for 80mm thick M-40 Grade, rubber moulded glossy finish Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 with grey cement and pigment including 25mm thick sand cushioning bed complete all as specified and directed.
Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified.
M&L for 75mm thick plain Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection,and paving 75 mm thicklaid in sloe finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ration 1:2 by weight and complete all as specified.
M&L for 100 mm thick plain cement concrete type B-1, 1:2:4 (using 20 mm graded curshed stone aggregate) finished even and smooth without using extra cment as in flooring complete all as specified and directed. Note- Glass dividing strips shall be measured and paid separately as supply only)
Supply only 38 mm wide and 3 mm thick glass dividing strips in flooring by fixing in position and making square or rectangle for casting concte in flooring complete all as specified and directed.
Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 1,11,650.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 3% (Three percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249
JP AND CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .