Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance OLD AIRPORT ROAD W ANBAL SRINAGAR J K 190005 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
6 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
REPAIR MAINT OF EM INSTALLATIONS INCLUDING CIVIL AND EM WORKS AT JAKLI RC UNDER GE 970 EWS
2023_MES_573911_2
GE 970 EWS-70/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹30,000
Yes
9 Mar 2023
15 Feb 2023
8 Mar 2023
15 Feb 2023
6 Mar 2023
20 Feb 2023
Amount
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
M&L 15mm thick cement plaster on other than fair faces of brick or stone masonary surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed
M&L preparing new surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed
Preparation of old decorated plastered surfaces of walls and applying one coats of cement base paint on old surfaces complete all as specified and directed
Rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screwscomplete all as specified and directed
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed
Plain, galvanised, 0.63 mm thick mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed
All as per item No 9 but except sheeting (any thickness) complete all as specified and directed
0.63 mm thick galvanized, corrugated mild steel sheeting with grade of zinc coating 275 with two corrugation side lap, fixed with 'L' or 'J' type or crancked hook bolts and washers in roofs, walls etc complete all as specified and directed
All as per item No 11 but except sheeting (any thickness) complete all as specified and directed
Preperation of old decorated steel surface (Corrugated or semi corrugated) roof of any description by brooming down, blowing by blower lamp and washing with water and removal of rubbish from roof surface and applying one coat of synthatic enamel paint of approved colour and pattern complete all as specified and directed
Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed
Supply & fixing in repair suspended false celling system using E Grid suspended celling Grid system. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm including 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked, IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof complete all as specified and directed
Demolition brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed
Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
All as per item No 17 above but except bricks complete all as specified and directed
M&L for preparation of new plaster surfaces of wall and applying two coats of oil bound distemper over a coat of primer chalk whitening complete all as specified and directed
M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper (oil emulsion) white or tinted complete all as specified and directed
Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each complete all as specified and directed
Taking down Shutters of any description n.exc 1 sqm each complete all as specified and directed
Solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening, edges will be painted to match with printed sheet complete all as specified and directed
Factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as per specified and as directed
S&F pressed steel fames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, and PCC 1:3:6 for frame filling etc complete all as specified and directed.
S&F 35mm thick, 2nd class hard wood plain framed, panelledshutter (two panel)with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle boar with commercial veneering on both faces. The size of rail and style as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003 (PartI), kin seasoned and chemically pressure treated complete all as specified and directed.
Factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed
Factory made 2nd class hard wood 30 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (b) complete all as specified and directed
Preparation of new or previously untreated steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of galvansied surfaces by using mordant solution including washing and cleaning etc complete all as specified and directed
Butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed
Butt hinges medium weight cold rolled mild steel 75mm size complete all as specified and directed
Aluminium handle, cast type, anodized 150 mm size ISI Marked complete all as specified and directed
100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed
200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed
250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
Supply and fixing galvanized mild steel wire cloth, 0.56 mm nominal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staple complete all as specified and directed
Supply and fixing in repair 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed
Preparing surfaces of new wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Preparing surfaces of old wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and directed
S&F switch piano, flush type 5 Amps single pole one way MAKE : ANCHOR / LEGRAND/HAVELLS
50 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified and directed
25 mm thick PCC 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in sub floor surfaces, complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Coloured non skid ceramic tiles 7 to8 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match existing surface over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed
Coloured non skid ceramic tiles 7 to8 mm thick, edgeless , area of each tile exc 0.18 sqm but n. exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match existing surface over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed
Glazed ceramic white tiles 350x250x7mm / 450x350x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the existing over and including rendering 10mm thick in CM 1:4 complete all as specified and directed.
75 mm thick plain cement concrete 1:4:8 type D2, using (40mm graded stone aggregate) as in sub base of floors complete all as specified and directed
Mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410W (Gde-E-250) quality A complete all as specified and directed.
Machine cut kota stone 18 to 20 mm thick in flooring laid over and incl 20 mm thick screed bed or bedding layer in CM 1:4 and jointed in grey cement slurry mixed with pigment to match the slab including rubbing and polishing complete all as specified and directed
Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed
15mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete fixed to wall and ceiling or laid in floors complete all as specified and directed
Refixing old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified and directed
S & F in repair 15 mm bore CP bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S & F in repair 15 mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
S & F in repair vitreous china urinal bowl type flat back, size 465 x 355 x 265 mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe complete all as specified and directed
S & F in repair PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed
S & F in repair Low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed
S & F in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, flushing pipe and anti-syphonage pipe complete all as specified and directed
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed
S&F angle iron and flat iron as in post and struds in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed
Supply only chain link MS galvanised fencing any size or type complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails straining bolts etc including provision of binding wire etc complete all as specified and directed
PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation concrete of fencing posts complete all as specified and directed
Supply, laying and testing of UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 35 sqmm 3.5 Core laid in trenches/pipes, fixed to poles/walls with suitable saddle & glands incl taking out the old burnt out cable complete all as specified and directed (Note :- Excavation, earth work, sand cushioning & brick protection shall be measured and paid separately)
All as per item No. 67 above but 95 Sqmm 3.5 core.
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth and getting out in soft/loose soil or hard/dense soil for taking up or laying of cable & electrical poles etc. complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.
Supply and laying dry river sand to be laid in 8 cm before laying of cable and 15 cm above cable in trenche as cable cushioning and covering complete all as specified and directed. Note: for payment purpose punned thickness shall be measured
Brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.
Supply and Fix in repair for street light fitting bracket made out of 40mm bore GI pipe, light grade, bend to shape, 1.2 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 50 x 6 mm with bolts, nuts and washers, complete all connected accesories for fixing of GI bracket with pole including one coat of anti corrosive primer and two coats of aluminium paint complete all as specified and directed.
S & F in repair Thermoplastic Cable Junction Box/Distribution Board size 333 x 233 x 105 mm, IP 65 with metric knockouts for cable entry of size 10 to 25 sq mm, 2 core including fastening clamp with LT pole, box hinged cover with locking arrangements including with terminals TPN strip, with 01 No MCB SP 6A 'B' Serials complete all as specified and directed. Make: HENSEL or its equivalent as approved by GE.
Supply and Fix in repair Energy efficient LED street Light Luminaire 70 watts capacity comprises a die-cast aluminium housing IP-65 Bow with front toughened glass cover suitable for mounting bracket of 40mm bore GI pipe light grade complete with all accessories and 2 core copper connecting cable of size 2.5 sqmm from junction box to light fitting (Approx 5 Mtr) complete and fixed on existing pole bracket including taking down old fitting as directed. Make : Cat Part No.BARFEG 70W LED V3 of bajaj or equivalent in approved makes.
Supply and fix in repair galvanised iron tubes 50mm bore, light grade including all fittings fixed to wall, ceilings and or laid in floors/tenches/under road etc complete for cable protection all as specified and directed.
Material and labour for sub main wiring with two runs of single core PVC insulated (FRLSH) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit/casing caping of suitable size & 4 sqmm single core copper conductor multistranded PVC insulated (FRLSH) unsheathed cable earth wire continuity conductor fixed on pole for connection from junction box to light fittings / switch to top of the Over Head Water tank of height not more than 30 mtr from ground level including taking down old complete all as directed Note : (i) Two run of cable 4 sqmm and one run of 4 sqmm earth wire and one run of PVC casing caping/PVC conduit shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Material and labour for earthing complete with galvanised steel earth plate electrode 60cmx 60cmx 6.00 mm thick buried directly in ground (Earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected and including GI strip 32mm x 6mm by means of GI bolts, nuts, check nuts and washers, earth plate surrounded by packed alternate layers of coal dust and common salt 15cm thick, all around top and bottom and watering pipe 40mm bore of GI pipe light grade with funnel and wire mesh and 50mm bore GI pipe light grade for protection of GI strip 32mmx6mm from top of earth plate upto test point (upto 7.5metre in length) connected with suitable size of GI nuts, bolts and washers all as shown in Electrical plate No. 3 of SSR Part-I, testing on completion including excavation/earth work in any type of soil/rock, PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways with suitable handle for lifting arrangement & including formwork and MS frame using MS angle iron 25x25x3mm and including taking out old complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit
S & F in repair test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8 mm dia 25mm long hexagonal Head screw complete all as specified and as directed.
Material & labour in repair for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC conduit 25 mm bore (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 81 here-in-before but socket out let 3 pin, 5 Amp on independent board with other switch.
All as per description of srl item No 81 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board.
Supply and fix in repair sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 8 way SPN 240 volts complete all as specified and directed.
Supply and fix in repair MCB SP 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed. Make: Havells Cat No DHMGCSNF6-32 IN "C' Series/ L&T/SCHNIDER
Supply and fix in repair MCB SPN 40 Amp, 240 volts,10 KA, C-curve complete all as specified and directed. Make: Havells Cat No DHMGCSNF040 IN "C' Series/ L&T/SCHNIDER
Supply and fix in repair Switch socket combination 2 in 1, 5 Amps 240 V AC flush type universal, complete all as specified and directed.
Supply and fix in repair Switch socket combination 5 in 1, 15 Amps 240 V AC flush type universal, complete all as specified and directed.
Supply and fix in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed
Supply and fix in repair Lamp holder batten/angular type complete including 1x7W LED lamp complete all as specified and directed.
Supply and fix in repair Ceiling rose 3 terminals complete all as specified and directed
Supply and Fixing in repair 1X18 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 with all accessories and connecting up with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. make : Havells Cat part No : LHEXBQP6IN1W018 or equivalent in : BAJAJ /Philips/CG. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.
Earthing complete with GI earth plate 60cmx60cmx6mm thick electrode and 4mm dia GI wire as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point incl taking out old complete all as specified and as directed.
Supply and Fix in repair Energy efficient LED street Light Luminaire 120 watts capacity comprises a die-cast aluminium housing IP-66 45 W with front toughened glass cover suitable for mounting bracket of 40mm bore GI pipe light grade complete with all accessories and 2 core copper connecting cable of size 2.5 sqmm from junction box to light fitting (Approx 5 Mtr) complete and fixed on existing pole bracket including taking down old fitting as directed. Make : Cat Part LHFPCZBFP46B120 of Havell's or its equivalent make of Philips /CG/wipro .
Supply and Fix Switch piano 5 Amps one way complete all as specified and directed. .
SOFI CONSTRUCTIONS
M/S A Q ENTERPRISES
M/S B S CONSTRUCTIONS
M/s Bashir Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .