Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC 261 BHARAT NAGAR BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹37.6 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹41.6 LRejected-Finance | ₹41.6 L | L2 | Rejected-Finance Not the lowest Bidder |
| 3 | L3₹44.7 LRejected-Finance | ₹44.7 L | L3 | Rejected-Finance Not the lowest Bidder |
| Sl No | Description | Qty | Unit | Surindera Kumar Bansal L1 | Vinod Kumar Bajaj L3 | Khatri Trunk Factory L2 |
|---|---|---|---|---|---|---|
| 1.00 | ALMIRAH LARGE STEEL FD-1031&1033
Taking down old damaged leg and S&F new leg made out of 1mm thick PBI sheet to shape including gas welding and one coat of primer complete all as specifed and shown on drg. | 160 | Each | 280 ₹44,800 | 375 ₹60,000 | 330 ₹52,800 |
| 2.00 | S&F in replacement lock, seven/six levers complete all as specified and shown on drg. | 200 | Each | 90 ₹18,000 | 110 ₹22,000 | 100 ₹20,000 |
| 3.00 | S&F in replacement chromium plated steel handle,100 mm long complete all as specified and shown on drg. | 150 | Each | 90 ₹13,500 | 125 ₹18,750 | 110 ₹16,500 |
| 4.00 | Re-setting of existing dislocated shelves by providing appropriate size clamps, nut and bolts of required numbers complete all as specifed and shown on drg. | 200 | Each | 60 ₹12,000 | 75 ₹15,000 | 60 ₹12,000 |
| 5.00 | Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point. | 350 | Each point | 15 ₹5,250 | 20 ₹7,000 | 18 ₹6,300 |
| 6.00 | M & L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed. | 250 | Each | 385 ₹96,250 | 510 ₹1.3 L | 440 ₹1.1 L |
| 7.00 | ALMIRAH MED STEEL FD-1032 & 1034
Taking down old damaged leg and S&F new leg made out of 1mm thick PBI sheet to shape including gas welding and one coat of primer complete all as specifed and shown on drg. | 300 | Each | 280 ₹84,000 | 330 ₹99,000 | 310 ₹93,000 |
| 8.00 | S&F in replacement lock, seven/six levers complete all as specified and shown on drg. | 400 | Each | 90 ₹36,000 | 105 ₹42,000 | 100 ₹40,000 |
| 9.00 | S&F in replacement chromium plated steel handle,100 mm long complete all as specified and shown on drg. | 350 | Each | 90 ₹31,500 | 125 ₹43,750 | 110 ₹38,500 |
| 10.00 | Re-setting of existing dislocated shelves by providing appropriate size clamps, nut and bolts of required numbers complete all as specifed and shown on drg. | 450 | Each | 60 ₹27,000 | 75 ₹33,750 | 60 ₹27,000 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹80,660
Closing Date
5 Feb 2026, 6:00 pmClosed
HQ CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
REPAIR TO MISC FURNITURE ITEMS INCLUDING CHARPOY GI PIPE AT FARIDKOT MIL STN
2025_MES_739826_2
CA NO CWE SGNR/TOKEN-85 OF 2025-26
Open Tender
Miscellaneous Works
120 days
GE FARIDKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE FARIDKOT
₹80,660
Yes
23 Feb 2026
16 Jan 2026
6 Feb 2026
16 Jan 2026
5 Feb 2026
23 Jan 2026
ALMIRAH LARGE STEEL FD-1031&1033 Taking down old damaged leg and S&F new leg made out of 1mm thick PBI sheet to shape including gas welding and one coat of primer complete all as specifed and shown on drg.
S&F in replacement lock, seven/six levers complete all as specified and shown on drg.
S&F in replacement chromium plated steel handle,100 mm long complete all as specified and shown on drg.
Re-setting of existing dislocated shelves by providing appropriate size clamps, nut and bolts of required numbers complete all as specifed and shown on drg.
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M & L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed.
ALMIRAH MED STEEL FD-1032 & 1034 Taking down old damaged leg and S&F new leg made out of 1mm thick PBI sheet to shape including gas welding and one coat of primer complete all as specifed and shown on drg.
S&F in replacement lock, seven/six levers complete all as specified and shown on drg.
S&F in replacement chromium plated steel handle,100 mm long complete all as specified and shown on drg.
Re-setting of existing dislocated shelves by providing appropriate size clamps, nut and bolts of required numbers complete all as specifed and shown on drg.
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M & L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed.
BED HARD STEEL : FD/E6/MAP/08(R) Removing old UNSV shoe and S&F new PVC rubber shoe of size 38mm at bottom of the leg complete all as specified and shown on drg.
Gas welding of broken spot of 25mm dia pipe complete all as specified and directed .
M & L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed.
BOOK CASE STEEL (GLAGED) FD-1028 S&F in replacement brass lock, six/seven levers complete all as specified and shown on drg.
S&F in replacement powder coated mild steel handle 100 mm long for shutter complete all as specified and directed .
Dismantling unsv/broken glass for shutter and S&F new glass of 5mm thick glass for shutter fixed in MS frame, nut and bolts of apropriate size & required numbers complete all as specifed and shown on drg.
M & L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed.
CHARPOY GI PIPE : FD-220 Removing old unserviceable 3 way elbow and S&F new 3 way elbow of GI, 32mm bore, (ISI Marked), weight not less than 400 grams each complete all as specified and directed.
Removing old unsv stiffener of MS flat and S&F new stiffener of MS flat size 32mm x 860mm x 5mm thick, including gas welding and one coat of primer complete all as specifed and shown on drg.
Removing old unserviceable check nut and S&F new check nut of GI, 32 mm bore, weight not less than 100 gram eachs complete all as specified and directed.
Dismantling old unserviceable long rail and S&F new long rail made out of GI tubing 32mm bore, medium grade duly threaded at both ends complete all as specified and shown on drawing.
Cutting of old existing unserviceable long rail retrieved from item No. 23 here-in-before and converting into two short rails duly threaded at both ends complete all as specified and shown on drawing.
Dismantling old unserviceable short rail, cutting and converting into two legs, one end of leg be threaded and on other end, 40mm dia 3mm thick MS sheet by continuous welding be provided. MS clamp duly painted with black enameled paint shall be provided by welding all as shown on drawing complete all as specified and directed.
CHARPOY FOLDING IP WITH HARD TOP : FD-388 (R) M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.
Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
CHAIR CUSHIONED WITH ARMS : TP Replacing unsv arms handle, made of ply propylene ,co-polyme complete all as specified and directed .
Removing unsv cushion seat & back with upholestered tapestry cloth and PVC beading and S&F fabric & moulded polyurethane foam with PVC lipping (beading) all round of seat,foam density 40 with upholestered tapestry cloth (providing New materials in superior quality) complete all as specified and directed .
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
CHAIR WRITING STEEL FD/E6/MAP/12 : S&F in replacement unserviceable arms handle black integral skin made of ply propylene ,co-polyme/ polyurethene with 75-56 share hardness complete all as specifed and shown on drawing
Removing unserviceable cushion seat & back with upholestered tapestry cloth including PVC beading and providing New cushion seat & back of density 40mm with upholestered tapestry cloth not less than Rs 250 per meter including PVC beading and providing in serviceable condition duly repaired in all respect complete all as specifed and shown on drawing
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
CHAIR REVOLVING STEEL WITH ARMS : (TP) S & F in replacement unserviceable arms handle black integral skin made of poly propylene co-polyme/polyurethene with 75-56 share hardness complete all as specified and shown on drawing.
M&L for replacement of unserviceable wheel of chair as per existing complete all as specified and directed
M&L for replacement of hydroulic fittings of chair as per existing complete all as specified and directed
M&L for replacement of base assembly of chair as per existing complete all as specified and directed
Removing of unserviceable cushion seat, padded back with upholestered leather/tapestry cloth, padded cushion of arms and providing new cushion seat of density 40mm, padded back with upholestered leather/tapestry cloth, padded cushion of arms complete all as specifed and shown on drawing
CHAIR COMPUTER : TP Replacing the existing UNSV wheel with new wheel of same or superior quality complete all as specified and directed.
Replacing the existing UNSV hydrolic fitting with new hydrolic fitting of same or superior quality complete all as specified and directed.
Replacing the existing UNSV base assembly with new base assembly of same or superior quality complete all as specified and directed.
Removing UNSV cushioned seat & back padded with upholestered tapestry cloth and providing the same with new materials of same or superior quality and repair/removing of UNSV parts of tilting mechanisam with swivel system and providing in serviceable condition duly repaired in all respect as directed .
CHAIR SCHOOL WITH HARD BOARD (FD/E6/MAP/05) Dismantling old unsv seat/back and S&F new one piece seat & back made of polypropylene ,co-polymer, weight not less than 1.2 Kg, moulded to shape all as shown on drg .
Removing old unsv shoe and S&F new PVC /Hard rubber shoe at bottom of the leg complete all as specified and shown on drg.
Gas welding of broken spot of 25mm dia pipe complete all as specified and directed . Note:-Welding alround shall be consider as one point.
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
CHAIR VERANDAH FD-256, 19(M) Removing old unsv cane/nylon newar from chair varandah and recanning with new plastic cane 4.00mm wide, half round, in white/yellow colour complete all as specified and shown on drg.
Dismantling old unsv leg and S&F new "U" shape leg made of 15 mm dia MS tube having 1.6mm wall thickness, welded by gas/electric welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg.
Removing old unsv shoe and S&F new PVC /Hard rubber shoe at bottom of the leg complete all as specified and shown on drg.
Gas welding to broken spot of 20mm round pipe of chair varandah complete all as specified and directed . Note:- Welding alround shall be considered as one point.
M&L for preparation of old painted surfaces of chair verandah and applying one coat of snythetic enamel paint (white colour) on chair verandah complete all as specified and directed.
CHAIR VERANDAH(FD/MAP/12) Removing old UNSV plastic seat & back and S&F new PVC seat & back, 4 x 10 mm thick ribs moulded . PVC seat 4 mm thick and weight of the PVC seat & back shall not be less than 1.85 kg.complete all as specified and shown drg .
Dismantling existing UNSV 'U' shaped legs and S&F new 'U' shaped legs made out of 18 gauge mild steel round pipe of dia 19mm by gas welding complete all as specified and shown on drg.
Dismantling existing UNSV rear & front tube of seat and S&F rear & front tube of seat made out of 18 gauge mild steel round pipe of dia 19mm by gas welding complete all as specified and shown on drg.
Gas welding to broken spot of 20mm round pipe complete all as specified and directed . Note:-Welding alround shall be considered as one point.
Removing old unsv shoe and S & F new PVC/hard rubber shoe at bottom of the leg complete all as specified and shown on drawing.
M&L for preparation of old painted surfaces and applying one coat of snythetic enamel paint (white colour) on chair verandah complete all as specified and directed.
CHAIR CB STEEL WITH ARMS : FD-75 (M) Removal of old bottom seat of chair CB steel with arms S&F new seat made of timber hard wood well seasoned duly canned with plastic cane 2mm to 2.5mm wide half round to be woven in Godrej pattern and fixed with appropriate size of nuts and bolts.
All as per itm No 59 here-in-before but back seat
Removal of old arm hard wood of chair CB steel with arms S&F new arm hand wood made of seasoned hard wood.
Gas welding to broken spot of 25mm round pipe complete all as specified and directed . Note:-Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
S&F of new shoe of hard rubber as approved quality after removing the old unserviceable existing shoe . All as specified and shown on drawing.
CHAIR CB STEEL WITHOUT ARMS : FD-75 (M) Removal of old bottom seat of chair CB steel with arms S&F new seat made of timber hard wood well seasoned duly canned with plastic cane 2mm to 2.5mm wide half round to be woven in Godrej pattern and fixed with appropriate size of nuts and bolts.
All as per itm No 64 here-in-before but back seat
Gas welding to broken spot of 25mm round pipe complete all as specified and directed . Note:-Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
S&F of New shoe of hard rubber as approved quality after removing the old unserviceable existing shoe . All as specified and shown on drawing.
DESK STEEL : FD-1021 Removing old UNSV top box and S&F new top box of size 100mm front & 200 mm rear x 1220mm long x530mm width with 19 thick prelaminated particle board one side natural teak faced and other side commercial including 4mm thick teak wood beading fixed with front of the top complete all as specified shown on drg
Gas welding of broken spot of 25mm dia tube complete all as specified and directed .
Removing old existing unsv leg shoes and S & F new PVC hard rubber shoes of approved quality of bottom of leg complete as specified and directed.
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
LOCKER BED SIDE STEEL FD-1029 Dismantling unsv/broken leg and S&F new leg made to shape, out of 1 mm thick mild steel sheet including gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg.
Taking down old unsv/damaged hapse and staple and providing new chromimum plated hasp and stapple 100mm long x25mm wide x 2.5 mm thick complete all as specified and directed..
Taking down old unsv/damaged handle and providing new chromium plated handle, 125mm long complete all as specified and directed.
Re-setting of existing dislocated shelves by providing appropriate size clamps, nut and bolts of required numbers complete all as specifed and shown on drg.
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed.
Table Computer : FD/E6/MAP/03 S&F in replacement of lock to the table by appropriate size steel screws / rivets complete all as specified and directed
Removing old unsv existing knob and S&F new aluminium anodized knob of 25mm dia with nut & washer complete all as specified and shown on drawing.
Removing old unsv existing shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
TABLE DINING ORs : FD-165 Dismantling unsv leg and S&F new leg,760mm high, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg.
Dismantling unsv long rail and S&F new long rail, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg.
Dismantling unsv short rail and S&F new short rail, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg.
Dismantling unsv centre stiffener and S&F new centre stiffener, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg.
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Table Office Clerk Steel : FD-1004, FD-84 (M) S&F in replacement of lock to the table by appropriate size steel screws / rivets complete all as specified and directed
Dismantling unsv leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drg.
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Table Office Officer Steel : FD-1003 S&F in replacement of lock to the table by appropriate size steel screws / rivets complete all as specified and directed
Dismantling unsv leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg.
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Table Steel with/without Drawer 900X600X760mm : FD-1007 & FD-1008 Dismantling unsv leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drg.
Dismantling existing unsv drawer and S&F new drawer made out of 1 mm thick PBI sheet including one coat of red oxide primer complete all as specifed and shown on drg.
S&F in replacement of lock to the table by appropriate size steel screws / rivets complete all as specified and directed
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Table 2'x2' Steel 600x600x760mm : FD-1009 Dismantling unsv leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drg.
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
TABLE 3'x3' Steel 900X900X760MM : FD-1009 Dismantling of old unserviceable existing leg S&F new legs made to shape and size of 25mm square tube of wall thick ness 1.6mm by gas welding. All as specified and shown on drawing.
Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
TABLE BED SIDE (MAP) : FD/E6/MAP/15 (R) Dismantling existing UNSV front legs and S&F new front legs made out 17mm thick mild steel square pipe of size 20x20mm having length 500mm, fixed with steel screw duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drg.
Dismantling existing UNSV 'U' shaped legs and S&F new 'U' shaped legs made out 17mm thick mild steel square pipe of size 20x20mm having length 600mm, fixed with steel screw duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drg.
Removing existing UNSV handle and S&F new mild steel powder coated handle 100 mm long for drawer complete all as specified and directed .
Gas welding to frame made of 18mm mild steel square pipe complete all as specified and directed. Note:-Welding alround shall be considered as one point.
Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.
M & L for french polishing to wooden surfaces of table bed side after preparing the surfaces smooth complete all as specified and directed.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
TEAPOY VERANDAH : FD/E6/MAP/17 S&F Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
TEAPOY VERANDAH : FD-383 S&F Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
Trestle Store Room Iron : FD-1043 Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Rack Adjustable Steel 7 Shelves Open Type 2175MMX900MMX500MM Re-setting of existing dislocated shelves of rack adjustable steel 7 shelves open type of size 2175mmx900mmx500mm by providing with appropriate size of clams, nut and bolts to reset the shelves at their place rest all as shown on drg and directed by Engineer-in-Charge
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Rack Adjustable Steel 6 Tier 1905 x 915 x 610mm : FD-1038 Re-setting of existing dislocated shelves of rack adjustable steel 6 tier of size 1905x915x610mm by providing with appropriate size of clams, nut and bolts to reset the shelves at their place rest all as shown on drg and directed by Engineer-in-Charge
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Rack Adjustable Steel 6 Shelves 1875x900x500mm Re-setting of existing dislocated shelves of rack adjustable steel 6 Shelves of size 1875x900x500mm by providing with appropriate size of clams, nut and bolts to reset the shelves at their place rest all as shown on drg and directed by Engineer-in-Charge
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Rack Adjustable Steel 6 Tier 1830x1830x610mm Open Type Re-setting of existing dislocated shelves of rack adjustable steel 6 Shelves of size 1875x900x500mm by providing with appropriate size of clams, nut and bolts to reset the shelves at their place rest all as shown on drg and directed by Engineer-in-Charge
Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Rack Shoe Steel : FD/E6/MAP/02 (R) Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.Note:- Welding alround shall be considered as one point.
Removing old existing unsv leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Side Rack Steel with Tray : FD-1023 Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed.
M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed .
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
Tender_85.pdf
Tender Documents • 0.75 MB
BOQ_838533.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid