REPAIR / REPLACEMENT OF CERTAIN B/R AND E/M ITEMS AT SUB AREA, 57 WEU AND ADJOINING AREA UNDER AGE B/R-I OF GE (NORTH) UDHAMPUR.

Amount

Demolition of cement concrete (un-reinforced) as in ground floor and paving, not exe 15cm thickness (below or above ground level), complete all as specified and directed.

Demolition of old cement concrete (un-reinforced) of any description and in any position, not otherwise specially provided for, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoins arches, pillar etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Raking out joints / pointing to random rubble or polygonal rubble, uncoursed or brought up to courses stone masonry, complete all as specified and directed.

Dismantling of structural steel work of any description and in any position, complete all as specified and directed.

Dismantling of mild steel barbed wire, chain link fencing of any description, not otherwise specifically provided for, complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC), embeded in concrete of any section including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed.

All as per serial item No. 9.00 here-in-above but except stone.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 11.00 here-in-above but except stone.

M&L for raised pointing to random rubble, uncoursed or brought upto course on stone masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed.

M&L for 15mm thick cement plaster on the fair face of brick work or concrete surface in cement mortar 1:4, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in coping, kerbing etc. including weathering, slightly rounded or chamfered including necessary formwork as required at site, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-1 (using 20mm graded crushed stone aggregates) as in sub base, floor etc, complete all as specified and directed.

M&L for sand filling under floors, paver or in foundation including watering and consolidation, complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in road side kerb stone etc. (of any section indicated) with plain fair faces including chamfers, weathering, throating etc. and setting in cement mortar 1:4 with joints to match, complete all as specified and directed.

M&L for machine pressed rubber moulded, manufactured/ compacted by vibrating table method precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

All as per serial item No. 19.00 here-in-above but except tiles/ paver blocks.

M&L for chequered cement concrete tiles of 20mm thick, area of each tile exc 0.04 Sqm but not exc 0.16 Sqm, set, jointed and pointed in neat cement slurry as in floors for external use, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 and pointed in coloured tiles grout to match the shade of tiles, complete all as specified and directed.

M&L for machine pressed rubber moulded, manufactured/ compacted by vibrating table method precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

S&F factory made, heavy duty, full body digital paving coloured tiles of size 300mm x 300mm x 10mm thick each, for external use, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 including jointed with neat cement slurry and pointed in coloured tile grout to match the shade of tiles, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains, complete all as specified and directed.

M&L for mild steel framed work for grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work, conforming to Fe-290 Gde E-165, complete all as specified and directed.

Excavating in post holes (or similar holes), not exc 0.50 Cum each, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick in hard/ dence soil, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foudation for fencing post, filling in and mass concrete, complete all as specified and directed.

Supply only GI wire 3mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for securing wire links at (top & bottom), complete all as specified and directed.

S&F in repair/ replacement galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed.

Restraining, resecuring including making good to galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed.

Supply only chain link fencing galvanised mild steel wire 3mm dia, mesh size not less than 50mm x 50mm or 75mm x 75mm etc. including provision of MS binding wires or fixing with nuts and bolts with angle iron posts, complete all as specified and directed.

Fixing only chain link fencing including line wires, wearing alternate mesh, any mesh, size and type to any type of standards, rails, straining bolts etc. including provission of binding wire, complete all as specified and directed.

S&F mild steel bolts, purpose made with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long and dia of neck exceeding 12mm but not exceeding 20mm, complete all as specified and directed.

S&F in replacement 110mm bore PVC (SWR) pipes, single socketed in any length, fixed to wall for drain out rain water etc, fixed with MS clamps of suitable size, complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surface of any description, exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

All as per serial item No. 38.00 here-in-above but width or girth not exc. 10cm.

M&L for preparation of old steel surface of any description, exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of new concrete surfaces / plastered surface of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

M&L for preparation of old concrete surfaces / plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of plastered or un-plastered or old decorative surfaces of walls and washing down, brooming down or steel wire brushing etc. and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L for preparation new plastered or unplastered surfaces of ceiling and washing, rubbing down and stopping of distempered and painted surfaces and complete removal of existing treatment and applying two coats of white wash, complete all as specified and directed.

Complete removing of existing treatment on walls surfaces by scraping down smoke soots, moulds, moss, efflorences salts and trading oil & greasy spots and removing all mud, cake with steel wire brush and gunny bags from old plastered surfaces and applying two coats of distemper oil emulsion, white or tinted over one coat of 1 to 1.20mm thick wall care putty over a coat of alkali resistance primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces by using necessary filling compound of Altek/ Birla white putty to obtain smooth and even finish with using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint, complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface by brooming down or steel wire brushing, scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion, white or tinted, complete all as specified and directed.

M&L for preparation of plastered or un-plastered surface of old decorative walls and washing down, brooming down or steel wire brushing etc and applying one coats of cement base paint, complete all as specified and directed.

Complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer, complete all as specified and directed.

M&L for preparation of old wooden painted surface not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces, exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of plastered or un-plastered old decorative surfaces, washing down, brooming down or steel wire brushing etc. and applying one coat of first quality exterior grade wheather proofing acrylic emulsion paint paint on walls, complete all as specified and directed.

Systematically cleaning of the water closer including nahani trap, floor trap and gully traps by bamboo/ wire/ kandi rotary, cleaner upto first mainhole of any type and dia, complete all as specified and directed by Engineer-in-Charge. Note :- The contractor or his authorised rep shall collect the complaint of all blockage of sewage from complaint cell / Engr-in-charge daily and all complaint will be rectified by the contractor with in same day, then returned the complaint slip after completion of complaint and get recipt from concered JE/Engineer-in-Charge. If he fails to complete the work within the same day then recovery will be made @150.00 per complaint per day.

Systematically cleaning of the sewage lines including gully traps by passing ropes, Knots, bamboo/ wire/ kandi, rotary cleaner etc. for any type and dia of sewage pipe, complete all as specified and directed.

Cleaning and desludging of manholes of any size, shape and any depth including pumping out liquid waste if any, removing all solid, waste materials such as stones, bricks, pipes, plastic etc. pluggings/ diverting of flow if required and removing the debries outside MD land including all precautionary and safty measures, complete all as specified and directed.

Cleaning and desludging of existing mini septic tank or manholes with gully traps of capacity not exc 10 Users and including inlet and outlet chambers and soakage well, taking out sludge in any form alongwith all other foreign materials by mechanical equipment or by way of other suitable means and removing waste material/ sludge (desludging not exc 0.50 Cum and dewatering not exc 0.50 Cum from each septic tank) etc. to a distance not exc 50 mtr including digging, burrying in ground, complete all as specified and directed. Notes :- (a) Work shall be done in foul conditions, necessary precautionary measures, equipments to be adopted by the contractor and cost of the same shall be deemed to include in the quoted rates. (b) The solid or semi solid sludge shall be burried in pits and fully covered with a layer of lime powder and earth. (c) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing manhole covers. (d) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-Charge without any extra cost to Govt.

All as per serial item No. 60.00 here-in-above but 100 users capacity (desludging not exc 6.0 Cum and dewatering not exc 6.0 Cum from each septic tank), complete all as specified and directed.

All as per serial item No. 60.00 here-in-above but 50 users capacity (desludging not exc 6.0 Cum and dewatering not exc 6.0 Cum from each septic tank), complete all as specified and directed.

All as per serial item No. 60.00 here-in-above but 25 users capacity (desludging not exc 4.0 Cum and dewatering not exc 4.0 Cum from each septic tank), complete all as specified and directed.

Excavation in trenches, exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation or for shafts, manholes, pier holes, laying of pipes/ cables etc. and getting out in any type of soil, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for 100mm bore SGSW (salt glazed stoneware) drain pipes, laid in trenches and jointed, complete all as specified and directed.

M&L for 150mm bore SGSW (salt glazed stoneware) drain pipes, laid in trenches and jointed, complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in replacement 100/110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to wall with MS clamps of suitable size, complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) bends with or without access door, complete all as specified and directed.

S&F in replacement 100/110mm bore PVC (SWR) bends with or without access door, complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) branch piece, equal or unequal, complete all as specified and directed.

S&F in replacement 100/110mm bore PVC (SWR) branch piece, equal or unequal, complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) junction single (Single T), equal or unequal with access door, complete all as specified and directed.

S&F in replacement 100/110mm bore PVC (SWR) junction single (Single T), equal or unequal with access door, complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as bed to 300mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.

Removing excavated material to a distance exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point, complete all as specified and directed.

Dismantling / taking out of cast iron or reinforced concrete drain pipes or salt glazed stoneware drain pipe of 100/75mm bore (internal dia), jointed in cement mortar and taking out of trenches and taking down from walls, complete all as specified and directed.

M&L for 100mm bore cast iron spun soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors, complete all specified and directed.

M&L for 100mm bore cast iron spun, waste and vent pipes in any length with or without ears with cement joints, fixed to wall with MS clamps of suitable size, complete all specified and directed.

All as per serial item No. 87.00 here-in-above but re-fixing only (except pipe) but with stack clamps etc, complete all as specified and directed.

M&L for 75mm bore cast iron spun, waste and vent pipes in any length with or without ears with cement joints, fixed to wall with MS clamps of suitable size, complete all specified and directed.

All as per serial item No. 89.00 here-in-above but re-fixing only (except pipe) but with stack clamps etc, complete all as specified and directed.

S&F in replacement 100mm bore spun cast iron bend/ reducer/ Tee (any radius) with access door diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in replacement 75mm bore spun cast iron bend/ reducer/ Tee (any radius) with access door diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in replacement 100mm bore spun cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

S&F in replacement 75mm bore spun cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

S&F in replacement 100mm bore cast iron vent cowl, complete all as specified and directed.

S&F in replacement 75mm bore cast iron vent cowl, complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slabs for manholes with plain faces, finished the surface fair and smooth, set in CM 1:6 including necessary formwork if required, complete all as specified and directed.

M&L for mild steel TMT bars 6-8mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for RCC 1:2:4 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams or similar work, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Use and waste of form work to side and soffits (rough finished concrete) of suspended slab such as roof slab, floor slab, landing and similar work, not exceeding 200mm thick (horizontal or sloping), complete all as specified and directed.

Dismantling ceiling boards (fiber, pulp, insulation etc.) or insulation board/ slabs/ blankets of any thickness including cover and MS Tee grid, complete all as specified and directed.

S&F false ceiling non asbestos fibre cement board 4mm thick, 600x600mm panel size, designed ceiling, conforing to IS-12862 to 14862 type 'B' in true horizontal level, suspended on inter locking metal grid dipped galvanized steel sections (galvanized @ 120 gms both side inclusive), consisting of main ‘T’ runner with suitably spaced joints to get required length and 15x32mm made of 0.30mm sheet, and cross at 600mm c/c to form grid including required cutting, making, opening for servies like diffusers, grills, light fittings, fixures, smoke detectors etc., Main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed existing rafter, purlin etc. with galvanised butterfly clips, spaced at 1200mm c/c alongwith min 'T', bottom exposed width of 15mm, all T-sections shall be centre black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/Sqm and fixed all existing electric wiring and fixture, complete at all heights as per direction of Engineer-in-Charge.

Dismantling of asbestos cement/ CGI/ PGI (corrugated or semi corrugated) sheets in roof coverings including ridges, complete all as specified and directed.

S&F 2/3mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap, fixed with coach screw and washer as in roof, wall etc, complete all as specified and directed.

S&F in repair 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour, having tensile strength of 550 Mpa as in roof coverings / cladding to walls, fixed with self tapping screws, complete all as specified and directed.

S&F in repair 0.50mm thick pre-painted glavalume aluminium zinc coating GI based plain steel sheet of any colour, having tensile strength of 550 Mpa as in roof coverings / cladding to walls, fixed with self tapping screws, complete all as specified and directed.

M&L for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, confirming to Fe-410-W (Gde-E-250 Quality 'A'), complete all as specified and directed.

Taking down carefully existing surface / concealed unserviceable aluminum/ copper point wiring (light, fan, socket, power or sunken box) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets, bracket holder, boards light fittings etc. and making good to disturbed surfaces of walls, floors, ceilings etc. where required and finished the existing surfaces after complete of new point wiring, complete all as specified and directed.

Taking down unserviceable sub main wiring of any type and any size including wooden batten, PVC conduit or casing caping, complete all as specified and directed.

Taking down unserviceable main switch / DBs of any size and capacity including MCB of any type & capacity for reuse, carefully disconnecting and making good to disturbed surfaces to match with existing surface, complete all as specified and directed.

M&L for point wiring using approved color coding as per IS code (Red, Black and Green for single phase circuit) with multi stranded copper condutor 1.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLSH cable 1100V grade in and including medium grade,PVC concealed conduit ISI marked of dia not less than 20mm and conduit accessories, concealed in wall/ roof/ floor etc. with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches, sockets, fan regulators etc. and PVC insulated multistranded copper condutor 1.5 Sqmm nominal cross section area, single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed for the followings :- One light Point, controlled by one, one way switch.

All as per serial item No. 113.00 here-in-above but for one ceiling fan point, controlled by one way switch.

All as per serial item No. 113.00 here-in-above but for one exhaust fan, controlled by one way switch.

All as per serial item No. 113.00 here-in-above but for one bell point, controlled by one way switch.

All as per serial item No. 113.00 here-in-above but for 3 Pin 5 Amp socket on the same board with other switches.

All as per serial item No. 113.00 here-in-above but 3 Pin 5 Amp Socket on independent board.

All as per serial item No. 113.00 here-in-above but for point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 Sqmm, drawn through in and including PVC conduit size of not less than 25mm concecled in wall / surface.

All as per serial item No. 113.00 here-in-above but for geyser / AC point with 4 Sqmm on independent board including 4 Sqmm multi stranded copper conductor earth wire connected to common earth/ earth dolly complete.

S&F modular switch, single pole, one way, 6 Amps, 240 volts with polycarbonate body, complete all as specified and directed.

S&F modular socket, 6 Amps, 5 pin, flush type, 240 volts with polycarbonate body, complete all as specified and directed.

S&F modular socket outlet, 5 pin, 6 Amps and 15 amps, multipurpose 2 in 1, flush type, 230 volts with polycarbonate body, complete all as specified and directed.

S&F modular switch, single pole, one way, 16 Amps, 240 volts with polycarbonate body, complete all as specified and directed.

S&F modular electronic fan regulator, step type, two module, 120 watt, 230 Volt and making all necessary connections, complete all as specified and directed.

S&F modular bell push, 6 Amps, 1 module, complete all as specified and directed.

S&F call bell, ding dong type, complete all as specified and directed.

S&F ceiling rose surface bakelite type, size 65x50mm three terminals, complete all as specified and directed.

M&L for point wiring using approved color coding as per IS code (Red, Black and Green for single phase circuit) with multi stranded copper condutor 1.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLSH cable 1100V grade, in and including medium grade PVC concealed conduit ISI marked of dia not less than 20mm and conduilt accessories, concealed in wall/ roof/ floor etc. with including Tee, Junction boxes and provision of 3mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switch, sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sqmm (Nominal area) and connected to main earth dolly, complete all as specified and directed for the followings :- One light / exhaust fan point, controlled by one way switch.

All as per serial item No. 129.00 here-in-above but for one ceiling fan point, controlled by one way switch.

All as per serial item No. 129.00 here-in-above but for one bell point, controlled by one way switch.

All as per serial item No. 129.00 here-in-above but for 3 Pin, 5 Amp, socket on independent board, complete all as specified and directed.

All as per serial item No. 129.00 here-in-above but for point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 Sqmm, drawn through in and including PVC conduit size of not less than 25mm concecled in wall / surface.

S&F switch piano, flush type, ivory finish, 5/6 Ampere, single pole, one way with marking as light, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 Pin, suitable for 5/6 Ampere in same board, flush type, complete all as specified and directed.

S&F switch piano, flush type, ivory finish, 15/16 Ampere, single pole, one way with marking as light, complete all as specified and directed.

S&F socket outlet, multipurpose, 2 in 1, 3 Pin suitable for 5/6 Amp and 3 Pin suitable 15/16 Ampere, flush type, complete all as specified and directed.

S&F switch socket outlet combination 2 in 1, 3 Pin suitable for 5/6 Ampere for independant board, flush type, complete all as specified and directed.

S&F switch socket combination, flush type, multipurpose, 3 pin 16 Amps and one 3 pin 6 Amps, controlled by one switch with fuse & neon indicator, ISI Marked, complete all as specified and directed.

S&F bell push, ivory finish, 5/6 Ampere, single pole, one way, complete all as specified and directed.

S&F one 5/6 Amp, two way switch, complete all as specified and directed.

S&F stepped type 5 steps, 100 watts electronic fan regulator, flush type on the existing phenolic laminated sheets etc. as required, complete all as specified and directed.

S&F lamp holder pendant / angle type, PVC/ polycarbonate type, insulated body with back plate of batten fitting, complete all as specified and directed.

S&F modular white cover plate with frame, 1 module, complete all as specified and directed.

All as per serial item No. 144.00 here-in-above but 2 module.

All as per serial item No. 144.00 here-in-above but 3 module.

All as per serial item No. 144.00 here-in-above but 4/5/6 module.

All as per serial item No. 144.00 here-in-above but 8 module.

All as per serial item No. 144.00 here-in-above but 12 module.

S&F in replacement modular metal flush box with 1.2mm thick, 1/2 module, flushing mounting in the wall for fitting cover plate with frame on switchs / sockets, complete all as specified and directed.

All as per serial item No. 150.00 here-in-above but 3 module.

All as per serial item No. 150.00 here-in-above but 6 module.

All as per serial item No. 150.00 here-in-above but 8 module.

All as per serial item No. 150.00 here-in-above but 12 module.

S&F in replacement surface mounting modular type plastic boxes / PVC rectangular block including cover plates for mounting of switches, sockets, fan regulator etc. of size 2 module including making necessary cutting and making good surface to match with existing surfaces, complete all as specified and directed.

All as per serial item No. 155.00 here-in-above but 3 module.

All as per serial item No. 155.00 here-in-above but 4 module.

All as per serial item No. 155.00 here-in-above but 6 module.

S&F in replacement switch socket combination, box type, gang box, 5 pin 5 Amps, flush type, complete all as specified and directed.

S&F in replacement switch socket combination, box type, gang box, 6 pin 16 Amps, flush type, complete all as specified and directed.

M&L for sub main wiring with two run single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V grade including 25mm dia in PVC concealed conduit/ PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc. as required, fixed on wall alongwith one run of 1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board complete including taking down unserviceable submain of any type and size and testing on completion etc, complete all as specified and directed. Note :- Two runs of 1.5 Sqmm and one run 1.5 Sqmm cable and one run of PVC conduit shall be measured as one RM/ Unit.

All as per serial item No. 161.00 here-in-above but using two run single core 2.5 Sqmm FRLSH copper conductor cable PVC insulated, 1100 V grade alongwith one run of 2.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board complete. Note :- Two runs of 2.5 Sqmm and one run 2.5 Sqmm cable and one run of PVC conduit shall be measured as one RM.

All as per serial item No. 161.00 here-in-above but using two run single core 4.0 Sqmm FRLSH copper conductor cable PVC insulated, 1100 V grade alongwith one run of 4.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board complete. Note :- Two runs of 4.0 Sqmm and one run 4.0 Sqmm cable and one run of PVC conduit shall be measured as one RM.

S&F in replacement single pole and neutral sheet metal steel powder coated distribution board for MCBs, fitted with bus bar neutral link earth bar and din rail suitable for use on 240 V, 50 Hz, double door, 4 Way, complete all as specified and directed.

All as per serial item No. 164.00 here-in-above but 6 Way.

All as per serial item No. 164.00 here-in-above but 8 Way.

All as per serial item No. 164.00 here-in-above but 12 Way.

All as per serial item No. 164.00 here-in-above but size double door MCB DB, TPN 4 ways, 415 volts grade IP-43 Protection.

S&F in replacement VTPN MCCB double door distribution board, 4 Way, 415 Volts grade IP-43 Protection with provision for MCCB as incoming and three / single phase (TP/SP) outgoings, complete with insulated bus bar arrangements, fixed/ flush to wall complete including connections with and including necessary reducer lugs, complete all as specified and directed.

S&F in replacement connection and testing 'C' series TPN MCB 40 to 63 Amp, 440 V, 50 Hz, 10 KA for lighting and other domestic loads include necessary copper lugs etc, complete all as specified and directed.

All as per serial item No. 170.00 here-in-above but SPN MCB 40 to 63 Amp, 240 V, 50 Hz, 10 KA.

All as per serial item No. 170.00 here-in-above but SPN MCB 32 Amp, 240 V, 50 Hz, 10 KA.

All as per serial item No. 170.00 here-in-above but SP MCB 6-32 Amp, 240 V, 50 Hz, 10 KA.

All as per serial item No. 170.00 here-in-above but SP MCB 40 Amp, 240 V, 50 Hz, 10 KA.

All as per serial item No. 170.00 here-in-above but SP MCB 63 Amp, 240 V, 50 Hz, 10 KA.

S&F in replacement LED light fitting with high output diffuser, 1 feet, 5 watt, 220 V, Trimline Neu is a robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white/ warm white diffuseris used to get glare free and smooth light distribution. Efficacy: 100 lm/W. Also available in warm white and natural white connecting up with three core flexible copper conductor cable of suitable size, CRI > 80, IP - 20, CCT - 6500K, complete all as specified and directed.

All as per serial item No. 176.00 here-in-above but 2 feet, 10 watt.

All as per serial item No. 176.00 here-in-above but 4 feet, 20 watt.

S&F in replacement LED bulk head (6500K) fitting of 9/10 Watt, surface mounting type, extruded polycorbonate body with diffuser complete with testing, complete all as specified and directed.

S&F in replacement ceiling mounting LED warm light fitting POLARIS PAN NIO-III,PANEL 2'x2' PLR 36 FO-ww, 35/36 watt LED environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for Armstrong / grid / ceiling, complete all as specified and directed.

S&F in replacement of surface / recessed mounting LED down lighter, round/ square shape, 10/12 Watt, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

All as per serial item No. 181.00 here-in-above but 15 Watt.

All as per serial item No. 181.00 here-in-above but 20/22 Watt.

S&F in replacement surface mounting LED, square shape, 18 Watt (size 1' x 1'), 220 volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in replacement LED street light fitting, 35 Watt, 230 Volts, AC, IP-66 protection, efficacy ≥ 110 lm/W, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with and including 0.60 mtr long 20/25mm (as per manufacturer's standard) dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site, complete all as specified and directed.

S&F in replacement metal clad plug socket, single pole enclosure with two pin earth plug and socket with one single 20 Amp, 240 volts MCB, complete all as specified and directed.

S&F in replacement fan capacitor, 2.5/3.15 MFD, complete all as specified and directed.

S&F polycarbonate plug top, 3 Pin, 15/16 Amps, ISI Marked, complete all as specified and directed.

S&F polycarbonate plug top, 3 Pin, 5 Amps, ISI Marked, complete all as specified and directed.

Supply only rigid non-metallic PVC casing & caping exclusive of boxes (junction / terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc, complete all as specified and directed.

KUMAR CONSTRUCTION CO (BID ID -3371547)

RAMAN KUMAR (BID ID -3371518)