Stock storage under JSV Division Jubbal in Tehsil Jubbal Distt Shimla HP SH Manufacture of cupborad for office room CO Toilet and Store Room for stacking of material

Amount

Half Brick masonary using common burnt clay building bricks above plinth upto floor two level in cm 1:6(1cement:6sand)conventiohal brick first class within all leads and lifts and as directed by the Engineer-in-charge.

Providing and fixing pressed steel door, frames, manufactured from comercial mild steel sheet of 1.25 mm thickness including hinges jump block Jamb, beed, and if required angle threshold of mil steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or regidly fixed together by machanical means adjustable lugs with split and tails to each Jamb i/c steel but things 2.5mm thick with guards lock strike plate and shock as specified and applying a coat of applying steel primer after pretreatment of the surfaces directed by the Engineer-in-charge.

Profile - A

Profile - B

Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 2ndclass deodar wood.

15 mm thick cement plaster on fair sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:3 (1cement:3sand)

20 mm thick cement plaster on rough sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand)

6 mm thick cement plaster in CM 1:3( 1cement 3 sand in roof slabs

Distempering (two coats) with oil bond distemper of approved brand and manufacture and of required shade on undecorated surfaceto give an even shade and including priming coat with distemper after throughly brushing the surface free from mortar dropping and other foreign matters.

Finishing wall with water profing cement paint of approved brand and manufacture and of rerquired shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Precast terrazo tiles 20m thick (with marble chipsof specified shadeand of specified laid in floor treads of steps and landingon bed on10mm thick cement plaster 1:6 (1cement6sand) jointed withneat cement slurry mixed with pigment to match the shade of tiles. selvary grey

In Skirting & riser ofsteps and dado incement plaster 1:3 (1cement:3sand) and jointed with white slurry. Selvary grey

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil grease & dirt and other foreigm matter

Painting two coats(excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give even shade including cleaning all dirt, dust and other foreign matters white paint

Providing and fixing MS. tower bolts barrel type with screws etc. complete.

200mmX10mm

150mmx10mm

Providing and fixing MS .handles with screws etc. complete.

125mm dia

100mm dia

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia metres bolts, nuts and wooden plug and embedding in cement concrete block 30x10x15cm. 1:3:6( 1cement:3sand:6 graded stone att. 20mm nominal size) within all leads and lifts and as directed by the Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm (Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of red lead paint etc. with in all leads and lifts as per the direction of the Engineer in charge.

Providing and fixing viterious China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement: 1 Sand) (Seat and cover to be measured and paid separately) Ordinary Type with in all leads and lifts.

Providing and fixing seat and cover for wash down water closet with C.P brass hinges and rubber buffer solid type white plastic seat and cover with in all leads and lifts.

Providing and fixing of connection pipe with brass union 45 cm long 15 mm dia with in all leads and lifts.

Providing and fixing in trenches 10 Kg.f/cum2 working pressure unplasticized P.V.C. pipe (Conforming to IS: 4985-1968) complete fittings (earth work in trenches to be measured and paid for separately):-

110 mm out side diameter.

50 mm inner side diameter.

Elbow 100 mm dia.

Elbow 50 mm dia.

Clamp 100 mm dia.

Clamp 50 mm dia.

Door Bends

Plain bends

Collar

Floor Traps

P/F C.P. Brass Bib tap with capstan head(15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.

Providing & fixing of Brass full way wheel valve of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & fixing of CP angle cock of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-union 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Elbow 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Tee 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Nipple 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing and fixing of 4 mm thick water prrof kit ply of standard quality ISI marked and approved shade and color in wall lining including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured and paid separatly)- Walls

Providing and fixing of venered teak plywood lining/ ceiling with decorative surface on one face with butt jointing and nails (frame work and fillets to be measured and paid separately) - 9 mm thick pine wood.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler with in all leads and lifts and entire satisfection of Engineer in Charge.

Extra over (polising) item No. 19 for every subsiquent coat of polish with in all leads and lifts.

Providng and fixing of suare edge cover fillets (Corner) 90mm x 90 mm section including mitring at junctions with wood screws and nails complete. 1st class deodar wood.

Providing and fixing 19mm thick water proof commercial board in shelves/ box for Cup boards of approved make with butt joints and fixing with nail & screws etc. complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass 4 mm thick

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass 8 mm thick

Providing and fixing of standard quality teak wood ply lining with butt jointing and nails )Frame work and cover fillets to be measured and paid separataly) with in all leads and lifts.

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as require

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x10 Sq. mm

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required

4x10 Sq. mm

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-12 way

Double door-16 way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required

Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required

Double pole. Cat-A.

Provinding and installation of folloing type of surface/recess mounting suqre /round type LED panel light with white powercoated extruded aluminium diecast housing equiped with specially designed cast aluminium heat sink with anti glare polycarbonate diffuser and energy effcient constant intregal, ele tronic driver, suitabe for input voltage AC 220-240V,50/60Hz. complete with all acessories, including making suitable cut-out in the existing ceiling, connections testing, and commissioning etc. as required.

LED Panel 36Watt 1.5X1.5'

Provinding and installation of following type of pole mounting LED luminaire with presser die cast housing with epoxy powder coated dark graphite gray colour finish , Prismatic polycarbonate cover with individual LED leses and seprated energy effcient constant current,non-intregal, eletronic driver, suitabe for input voltage AC 220-240V,50/60Hz. complete with all accessories, connections, testing and commissioning etc. as required

Street Light 45watt

rupinder justa govt contractor (BID ID -548382)

PRATYUSH JUSTA (BID ID -549343)

PARKASH SHARMA GOVT. CONTRACTOR (BID ID -549352)