SPL REPAIR TO TOILET, BATHROOM CONNECTED FITMENT ITEMS ALONG WITH RE-WIRING OF BLG NO. P-12 (SINGLE OR LIVING ACCN) OF LT AD REGT OF AGE B/R-II UNDER GE (I) KANPUR.

Amount

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and complete all as specified and dircted.

M&L Non- skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed. (Make : Kajaria, Johnshon, or equivalant).

M&L Glazed ceramic coloured tiles in vertical surface like skirting, dado complete 350x250mmx7mm/ 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thickrendering in cm 1:4 complete all as specified and directed. (Make : Kajaria, Johnshon, or equivalant).

Taking down cement plaster on wall including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed

M&L 15mm thick rendering on fair faces of brick wall in CM 1:6 finished even & fair complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar 1:4 with using WPC on fair faces of concrete or brick surface finished even and fair without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L Applying two coats of cement base paint over a coat of primer including preparation of newly plastered untreated surface of wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified and directed.

Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below and procedure as per Appendix 'A' of Particular specifications : (a) S&F drainage spout pipe GI 40 mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600 mm long) (b) M&L PCC 1:1.5:3 type B0 (using 12.5mm graded stone agg), 50 mm thick laid in slope towards drainage out spout pipe mixed with waterproofing chemical as per manufacturer instructions of MAKE :FOSROC/SICA/ Pidilite/STP. Khurra 150mmx150mm (min) at appropriate location for free flow (of leaked water if any) towards drainage spouts shall be provided integrally while laying PCC.Fixing of spout shall be done with same PCC as in this item. (c) M&L18 mm thick cement platster in CM 1:3 on vertical faces mixed with water proofing chemical of MAKE :301 Pidicrete URP of Dr Fixit or other techno commercially Equivalent make of SIKA/ Pidilite/FOSROC/STP (d) Item no 14(c) shall be executed while concrete is green as per item no 14(b) above and proper curing and ponding test shall be done before laying drainage/water supply pipes upto the entire satisfaction of Engineer in charge.

(e) Applying two coats of SIKA TOP seal 107 of SIKA or other techno commercially Equivalent make of FOSROC /Pidilite/Dr Fixit/STP on vertical as well as horizontal surface. (f) Drainage and water supply pipe if required & test for leakage/sanitary pipes and shall be laid to slope and a clear gap underneath the pipes shall be made available by providing suitable cement concrete blocks. (g) M&L PCC 1:5:10 type E-2 using 10-40mm down graded stone aggregate as reqd depth at site over and including 150mm thick 20mm single sized stone agg to provide a filter media. (h) M&L PCC 25 mm thick 1:2:4 typeB0 using 12.5 mm grade stone aggregate as level course. (j) M&L for 7 to 8 mm thick non skid ceramic coloured printed tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:6 ).

Note for item NO 14: (i) Waterproofing Treatment shall be undertaken alongwith laying of drainage pipes/Sanitary pipes/ Drainage Spout etc (ii) The work shall be carried out as per the direction of Engineer in Charge. (iii) The sunken treatment work shall only be carried out after written approval of Engineer in charge for Leakage/seepage of water/sanitary pipes. (iv) Cost of drainage spout shall deemed to be included in the item however sanitary pipe, water pipe line if required shall be paid separately under respective item. (v) Laying of Chemical required for varios applications shall be as per manufacturer instructions. (vi) Plan area shall only be measured and paid. (vii) The contractor shall give a guarantee of 10 years from the date of completion of work for sunken treatment. The amount Rs. 25.00 (Rupees Twenty five Only) per Sqm and min of Rs 2500/- for sunken treatment shall be withheld from contractor’s final bill till the expiry of guarantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE (I) Kanpur.

Taking up or down steel tubing and connections of 15 mm bore complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including removal complete and all as specified and directed

Taking up or down 25 mm dia steel tubing and connection including removal complete and all as specified and directed

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S & F GI steel tubing 15mm bore medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and complete all as specified and dircted.

S & F GI steel tubing 20mm bore medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and complete all as specified and dircted.

S & F GI steel tubing 25mm bore medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and complete all as specified and dircted.

Fixing only in repair 15mm bore steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete and all as specified and directed

Fixing only in repair 20mm bore steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete and all as specified and directed

S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets fixed in repairs complete all as specified and directed.

S&F for in repairs 15mm bore dia Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repair 15mm bore bib tap, fancy type chromium plated screwed down high pressure , with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. Make: L&K/Jaquar/ Plumber/Prayag as approved by GE

S & F in repair 15mm bore angle wall cock fancy type chromium plated screwed down high pressure (concealed type) screwed to GI pipe15mm bore and fixed incl SS flange complete all as specified and directed. Make: L&K/Jaquar/ Plumber/Prayag as approved by GE

S & F in repairs 15mm bore stop valves,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs15mm bore PVC connection 450mm long heavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed

S&F in repairs chromium plated brass shower rose 150 mm dia with swivel joint complete all as specified and directed. Make: L&K/Jaquar/ Plumber/Prayag as approved by GE

S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed.

Supply and fixing wash down water closet (Pedestal pattern) white, complete with seat cover fixed as in repairs. (Make : Hindware/Parryware/Plumber as approved by GE)

S & F in repairs stainless steel jet for EWC with flexible cord of approved quality complete all as specified and directed.

S & F in repair toilet paper holder chromium plated complete all as specified and directed.

S&F in repair hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed. Make : jaguar/ Plumber/ Hindware as approved by GE(I).

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.

S&F in repair Vitreous China urinals half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete all as specfied and directed.

S & F in repair angular stop cock two way 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.

S&F in repair brass chromium plated soap dish complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F in repair 100mm dia spun type Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to wall complete all as specified and directed.

S&F in repair 100mm dia spun type Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints and laid in trenches or in floors complete all as specified and directed.

S&F 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 75mm dia spun type Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75mm dia Spun type Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to wall complete all as specified and directed.

S&F 75mm dia CI bend (any radius) , Tee single or double with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs 40 mm bore waste coupling PTMT half or full threaded complete and all as specified and directed

S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

S&F in repairs 20mm bore dia of pipe gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, etc. & finishing surface even and smooth with using extra cement complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in floor finishing surface, etc. even and smooth with using extra cement complete all as specified and directed.

M&L for Glass dividing strips, 3 mm thick & 38mm width of strip inserted in position and complete all as specified and dircted.

Demolition reinforced concrete of any description and in any position and make good, and complete all as specified and dircted.

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) n. exc 1.5 sqm complete all as specified and as directed

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) exc 1.5 sqm n exc 4 sqm each complete all as specified and as directed

Taking down shutters only any description exc 1 sqm n exc 2 sqm complete all as specified and directed.

M&L for welding in repair n exc 6mm thickness of metal to be welded and complete all as specified and dircted.

S&F in repair HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

S & F in repair ball valve for 25mm bore of pipe high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms ) and complete all as specified and dircted.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube. complete all as specified and directed. (Make Rajshree).

S&F Factory Made Solid PVC Moulded Door Shutters (cofee/brown colour) 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing (Make : Rajshree or equivalant as approved by GE).

S&F of 100 mm size PVC butt hinges of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC handle of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC tower bolt of Make: Prayag or equivalent complete all as specified and directed.

S & F 35mm thick second class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick factory made glazed and Skelton shutters 2nd class HW rails and stiles planed framed and open rebated and prepared to receive glass, gauze etc (without sash bars) with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part I, section 8 clause 8.24 (a) supplied and fitted to chawkhats complete all as specified and directed.

S&F MS butt hinges 100mm medium weight, cold rolled and fixed complete all as specified and directed.

S&F 250 mm long aluminium anodised Sliding door bolt with haps, staple (bolt type)and fixing clips of sheet, cast or extruted section and fixing bolts and sliding bolts of extruted sections or cast-aluminium alloy all as specified and directed.

M&L Painting to wood and wood based surface of any description over 10cm width or girth including two coat of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface complete all as specified and directed.

M&L Painting to wood and wood based surface of any description over 10cm width or girth including one coat of synthetic enamel paint on old surface complete all as specified and directed.

S&F aluminium anodised handle "D" type of size 125mm complete all as specified and directed.

S&F of 200 mm long barrel tower bolt aluminium anodised of extruded section and fixed complete all as specified and directed.

M&L Painting to steel and iron surface of any description over 10cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface complete all as specified and directed

M&L Painting to steel and iron surface of any description over 10cm in width or girth not otherwise described with one coats of synthetic enamel paint on old surface complete all as specified and directed

Dismantling loose concrete cover of RCC coloumns, beams slabs, chajjas and the like as diected, roughening and cleaning in concrete surfacces with steel wire brushes, washed with water and allowed to drey including derusting of steel reinforcement , providing facbric mild steel wire mesh 75mm x 75mm x 2mm dia as and steel reinforcement bar to concrete surfaces, applying adhesive/admixture over steel mesh and steel reinforcement bar and providing 20 mm thick (average thickness) dubbing coat in CM (1:3) including 10 mm thick plastering in CM 1:4 even and smooth complete all as directed including providing scaffolding system on the exterior side, upto three storey height made with wooden balli/bamboo of suitable size or MS tube stiffened with suitable bracing, runners connection with the building, challies for making working platform upto requisite height and required location with essential safety features for the workmen etc. Complete as per direction and approval of Engr-in-Charge. Note : (a) Where ever steel reinforcement bars and welded steel wire fabric are required to be provided the same shall be measured separately under relevant items. (b) Material and application of adhesive/admixture over steel mesh and steel reinforcement bar shall deemed to be included in this item and nothing extra shall be paid under this item.

Supply only for Mild steel TMT 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed ) ,complete all as specified and directed by Engineer-in-Charge.

Supply only welded steel wire fabric weight n exc 4 Kg/sqm ,complete all as specified and directed by Engineer-in-Charge.

S&F factory made steel tubular Steel window with side hung shutters including box type hinges with steel handle and stel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F factory made steel tubular Steel window with side hung shutters including box type hinges with steel handle and stel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete as specified and directed.

S&F 3mm thick figured glass pin haded type and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

Suply and fixed stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm averaage width of operature fixed with tinned tacks or galvanished wire staple complete all as speficied & directed.

S & F in repair galvanized mild steel wire cloth 0.36 mm nominal dia of wire and avg width of apertare 1.50 mm fixed with tinned tacks or galvanized wire staples.

Supply and Fixing in repair 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each incl hacking out complete all as specified and directed.

S&F in repairs stainless steel curtain rods of 25mm dia with SS brackets fancy type as in doors/ windows pelmets including screws and other necessary fitting for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. or equivalent as specified.

S&F in repairs18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to brick or concrete wall/timber frame work including liping work teak wood beading 6mm thick as in CB/locker shelf/partition, writing table and book shelf comple all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and as directed .

M&L Brick work with old size sub class ' B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with complete all as specified and as directed.

M&L Brick work old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 comlete all as specified and as directed.

S&F for framed work of angle or tees with web and flanges cut to shape, drilled and countersunk for screw, incl bending & welding angles as necessary conforming to Fe 290 Gde for cage to PVC water tank rested on RCC roof slab complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer including 2mm thick birla wall care putty complete all as specified and directed.

M&L for two coat of oil bound distemper over a coat of primer including 2mm thick birla wall care putty after complete removal of old treatment of wall complete all as specified and directed.

M&L for Applying two coats of cement base paint after complete removal of exixting treatment of old surface and preparation surface of wall complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

Point wiring for one light point/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. (Make of Cable : Gloster, Havells, Plaza) and Make of Conduit : Plaza/Havells/AKG

All as per srl item No-97 here in above but upto ceiling height and on surface at ceiling and complete all as specified and directed.

All as per srl item No-97 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit and complete all as specified and directed.

All as per srl item No-97 here in above but for one 3 pin 5A socket outlet independent controlled by one switch and complete all as specified and directed.

All as per srl item No-97 here in above but for one 5A socket outlet on the same board controlled by one switch and complete all as specified and directed.

All as per srl item No-97 here in above but for one light point controlled by 2 nos two way switches and complete all as specified and directed.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts and complete all as specified and directed. Make :Anchor/Havells/L&T/Legrand

Switch piano flush button single pole one way 15/16 amps 230 Volts and complete all as specified and directed. Make :Anchor/Havells/L&T/Legrand

M&L for socket 5 amps 5 pin flush type, 230 volts and complete all as specified and directed. Make :Anchor/Havells/L&T/Legrand

M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts and complete all as specified and directed. Make :Anchor/Havells/L&T/Legrand

M&L for ceiling rose surface bakelite 3 terminals and complete all as specified and directed. Make :Anchor/Havells/L&T/Legrand

S & F Lamp holder insulated body with back plate for dome batten fittings and complete all as specified and directed. Make :Anchor/Havells/L&T/Legrand

S & F of switch piano flush type 6 Amps single pole two way complete all as specified and directed. Make :Anchor/Havells/L&T/Legrand

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed. Make :Anchor/Havells/L&T/Legrand

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Cable : Gloster/ Havells/ Plaza

All as per srl item No-111 here in above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia and complete all as specified and directed.

M&L in replacement for submain wiring with four single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 16 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 10 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Cable : Gloster/ Havells/Polycab and Make of Conduit : Plaza/Havells/AKG

S&F in replacement of wall mounted LED light fittings 20/22 watt, 6500K, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed. Make: Havells/Crompton/Phillips

S&F in replacement of LED mirror light fitting 10/11 Watt,2' long, with efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed. Make: Havells/Crompton/Phillips

Supply and fix in replacement of High power LED wall security light 25 Watt Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as spfd. Make: Havells/Crompton/Phillips

S & F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, confirming to complete with one MCCB 3 pole 415 Volts 100 Amps, 4 pole rating with rupturing cap 26 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed. Make: Havells/Legrand/Siemens/Indoasian

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . Make: Havells/Legrand/Siemens/Indoasian

M&L for MCB single pole 240 volts 5 to 30 amps, with rupturing capacity 10 KA using thimbles of required size and complete all as specified and directed. Make: Havells/Legrand/Siemens/Indoasian

M&L MCB single pole & neutral 240 volts 30 to 63 amps,with rupturing capacity 10 KA using thimbles of required size and complete all as specified and directed. Make: Havells/Legrand/Siemens/Indoasian

M&L for single pole and neutral enclousere with a top pin, earth plug and socket copmlete with one SP MCB 25 Amps, 240 Volts and complete all as specified and directed. Make: Havells/Legrand/Siemens/Indoasian

Disconnecting, dismantling and taking out of electric geyser any capacity and re-fixing duly painted on the same or other indicated location including grouting with suitable size of nut/bolts or fastner and making all water and elecric connection and testing on comletion complete all as specified and directed.

Disconnecting, dismantling & taking down exhaust fans with all accessories any capacity and re-fixing duly painted on the same or other indicated location including grouting with suitable size of nut/bolts or fastner and making elecric connection and testing on comletion complete all as specified and directed.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, without remote and electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified. Make - Havells/Bajaj/Orient as approved by GE. Note : (a) Make, Model & Colour of fan as approved by GE. (b) Writing MES No. in black synthetic enamel paint by the contractor. (c) T & P will be provided by the contractor for reaching any height of the bldg.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays and for rerouting of cables.

Returning filling, in including spreading, levelling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

M&L for sand cushioning to underground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable

Supplying and laying sub class b bricks old size, size 230mm x 115mm 75mm complete all as specified and directed.

Disconnecting electrically and taking out old unserviceable LT UG cables any type of size up to 70 Sqmm 3.5 core all as spfd and directed.

Supply and laying in trenches or fixing to wall/pole or passing through pipe XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 Sqmm 3.5 core.Make of cable Gloster/Plaza/ Grandlay. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

M/S MAA TARA TREATMENT PROJECT

murty construction company

JOG CONSTRUCTION

JEEWAN BUILDERS AND ENGINEERS

Khalil Ahmed and Sons

Allied Builders And Engineers

RAJAT TRADERS