REPAIR TO BOUNDARY WALL, RETAINING WALL, COMPOUND WALL, GATES AND ALLIED REPAIRS AT BIKRAM ENCLAVE, IFA, NODE AND AOR OF AGE B/R-II, UNDER GE (SOUTH) UDHAMPUR

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling old unserviceable barbed wire/fencing wire mesh including removing from site all as specificed.

Demolition of cement concrete un reinforced of any description and in any position not otherwise specially provided for complete all as specified and directed.

Demolition of reinforced cement concrete work of any description not specifically provided incl cutting down reinforcement complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth in any type of soil and getting out soil, complete all as specified and as directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete, complete all as specified and as directed.

Walling of random rubble stone masonry uncoursed, with best quality locally available stones, well bonded, bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed.

Precast PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in bond stones, set in CM 1:6 with match the joints all as specified and directed.

Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and as directed.

110 mm dia PVC (SWR) pipes single socket in any length as in weepholes of retaining wall all as specified and directed.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.

Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain etc all as directed.

Preparation of new plastered surfaces of wall and applying two coats of white wash, complete all as specified and as directed.

Flush pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3, complete all as specified & directed.

Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, complete, all as specified and directed.

Machine pressed rubber moulded manufactured / compacted by vibrating table method pre-cast concrete interlocking paver block ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement with imported pigment, over and including 20 to 30mm thick layer of sand cushioning, complete all as specified directed. Note: Shape& pattern shall be approved by the GE.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick, with mixture of white & grey cement in equal proportion & anti pigment set, jointed and pointed in neat cement slurry in floors, and including 20 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed.

75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter including rough finished flat surfaces of concrete, complete all as specified and as directed.

Formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter fair finished flat surfaces of concrete complete all as specified and directed.

Formwork to pillars, coloumn and simiar work etc fair finished surfaces square, retangular and polygon all as specified and directed.

Formwork for fair finished to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

Pre-cast RCC cement concrete 1:2:4 type B-1 (20mm graded) as in manhole cover slab and in similar works bedded and jointed in cement morter 1:4, complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete all as specified and as directed.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and including binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.

TMT mild steel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and includingMS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed.

Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 gde E-165, complete all as specified and as directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zink chrome primer complete, complete all as specified and as directed.

Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacing, straining and fixing to any standard rails and straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc all as specified. (Each line of wire to be measured)

Concertina coil to any type of standard rails including screwing in position complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and as directed.

Round bars 10mm dia and over, cut to length, bent to shape required, including bending,hooking ends, with mild steel wire not less than 0.9mm dia or securing with clips quality conforming to Fe-290 Gde E-165 as in chian link fencingcomplete all as specified.

Mild steel screw bolts (machine made) 11 - 15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm longn but not exc 10cm long, complete all as specified and directed.

Supply only mild steel galvanised chain link fencing of mesh galvanised plain wire complete all as specified and as directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standard rails, straining bots etc including provision of binding wire complete all as specified and as directed.

M/S ASHOK KUMAR PACHIALA (BID ID -3463407)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3464047)

s l sharma and sons (BID ID -3461768)

M/S SHREE RAM DUBEY AND SONS (BID ID -3469559)

sohtra and co (BID ID -3464205)

jyoti parkash sharma (BID ID -3469589)

M/S R S Builders (BID ID -3459941)

M/S Inderjit Sharma and Co. (BID ID -3469106)

VARDHMAN INTERNATIONAL (BID ID -3461534)