Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC | L1 | Accepted-AOC Accepting being lowest | |
| 2 | L2₹44.9 L+₹2.9 L (6.86%)Rejected-Finance | L2 | Rejected-Finance Rejected being other than lowest | |
| 3 | L3₹48.8 L+₹6.7 L (16.0%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest | |
| 4 | L4₹50.0 L+₹7.9 L (18.8%)Rejected-Finance | L4 | Rejected-Finance Rejected being other than lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Pramod Kumar Tripathi
Military Engineer Services, Garrison Engineer (South) Ahmednagar - 414002
Provn of Certain LBW Works at Aurangabad under GE (S) Ahmednagar
2022_MES_554791_1
8907/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Aurangabad
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (South) Ahmednagar
₹1 L
Yes
15 Nov 2022
28 Sept 2022
28 Oct 2022
28 Sept 2022
26 Oct 2022
12 Oct 2022
28 Sept 2022 - 5 Oct 2022
Amount
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed.
Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil all as specified and as directed.
Excavation in post holes or similar holes, each not exceeding 0.50 Cum, getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface all as specified and as directed.
Returning, filling, in soil, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.
Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.
M&L for moorum filling in floors and pavings, laid in layers n exc 15cm thick, spreading, levelling and ramming including watering all as specified and as directed.
M&L for hardcore of broken stone or boulders of gauge exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface all as specified and as directed.
M&L for plain cement concrete, 1:4:8, type D2, using 40 mm graded stone aggregates in foundations, filling and mass concrete all as specified and as directed.
M&L for PCC 1:3:6, type-C1, using 20 mm graded stone aggregates as in coping, window and door cills, lintels, plinth courses, string courses, bed plates including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and as directed
M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, and similar articles including moulds, forms etc, set in cement mortar 1:6 all as specified and as directed. Note : Reinforcement will be measured and paid separately.
M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for 25mm thick damp proof course in plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregates) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.
M&L for preast cement concrete block masonry with solid blocks of PCC (1:5:8)( using 20mm graded stone aggregate), exc 10cm in width, built in cement mortar 1:6 complete all as specified and as directed.
S&F 35mm thick, factory made, second class hardwood, plain, framed panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS;1003 (Part-I), kiln seasoned and chemically pressure treated all as specifed and as directed.
S&F factory made solid PVC door shutter, 30mm thick (styles), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panellng of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined toghter with solvent cement and fixed to frame complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixed in opening all as specified and as directed.
S&F 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.
S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.
S&F aluminium barrel tower bolt of extruded section 150mm long all as specified and as directed.
S&F 150mm mild steel pressed handles, oval type, stove enamelled black all as specified and as directed.
S&F aluminium handle anodised fabricated type of size 125 mm all as specified and as directed.
S&F 300mm mild steel sliding door bolt, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts, four on bolt plate and two on staple plate etc fixed comlete all as specified and as directed.
S&F tubular towel rail, brass, chromium plated, 20 mm dia `D' type, 60 cm long between flanges all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.
All as per serial item No 24 but 6mm to 8mm dia bars all as specified and as directed.
M&L for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or rivetted or forged into spikes, framed guard bars and similar work conforming to Fe 290. Gde-165 complete all as specified and as directed.
S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging or sliding with and including either hooks and or hinges or steel hanging door fittings and hanging and fixed, work conforming to Fe 290. Gde-165 complete all as specified and as directed.
M&L for rolled mild steel as in main and cross beams, heap and jack rafters, purlins where connected to common rafters and running rails and guides for slidig doors fixed with angle cleats or other connecting plates confirming to Fe 410-W(Gde-E250) quality A) all as specified and as directed.
M&L for rolled mild steel as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W(Gde-E250) quality A) all as specified and as directed.
M&L for rolled mild steel in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections conforming to Fe 410-W(Gde-E250) quality A) including distance pieces, cleats etc. all as specified and as directed.
M&L for plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment all as specified and as directed.
M&L for rolled mild steel compound girders and stanctions, lattice girders, aerial masts, staging for water tanks and like including caps, bases, splices etc built from two or more beam or channel sections or angles with plates including all lattice bars, stiffener, gusset plates etc conforming to Fe 410-W(Gde-E250) quality A) all as specified and as directed.
M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 all as specified and as directed.
M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of colour as approved by GE, having strength of 550 mpa as in roof covering etc all as specified and as directed.
M&L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick, sheeting of colour as approved by GE, having strength of 550 mpa as in roof covering etc all as specified and as directed.
M&L for 75mm thick cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base all as specified and as directed.
M&L for 100mm thick cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base all as specified and as directed.
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L for 100mm thick cement concrete 1:2:4, type B-2 using 40 mm graded stone aggregate as in floor, laid in alternate panel, finished the top surface even and fair, including use and waste of form work if required all as specified and as directed.
M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, fiiled with sealing compound Grade 'A' all as specified and as directed.
M&L for 20-25 mm thick machine cut kota stone flooring (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer in cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust etc complete all as specified and as directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for glazed coloured ceramic tiles of size 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick on vertical surfaces like dado, skirting etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L for 60mm thick machine pressed precast cement concrete coloured, rubber moulded interlocking paver block, glossy finish/rubber mat finish, M-35 grade, any shape and size with grey cement and pigments conforming to IS 15658-2006 laid over and including 25mm thick sand cushioning and filling of interstics with fine sand complete all as specifed and as directed. (Note : Design and pattern of paver blocks shall be approved by GE)
M&L for 80mm thick machine pressed precast cement concrete, interlocking paver block, M-40 grade, any shape and size with grey cement and pigments conforming to IS 15658-2006 laid over and including 25mm thick sand cushioning and filling of interstics with fine sand complete all as specifed and as directed. Note : (i) Design and pattern of paver blocks shall be approved by GE (ii) This item shall be executed in covered car parking with hard standing only
M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete sur-faces finished even and smooth with sagol finish complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash all as specified and as directed.
M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed
M&L for 3 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed
M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed
M&L for preparing new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed
S&F 15 mm bore GI tubing, medium grade with all fitting and fixed complete on walls (concealed or open) and ceilings or laid in floors etc complete all as specified and as directed.
S&F 25 mm bore GI tubing, medium grade with all fitting and fixed complete on walls (concealed or open) and ceilings or laid in floors etc complete all as specified and as directed.
S&F bib taps, 15 mm dia, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed all as specified and as directed.
S&F 15mm bore stop cock, cast copper alloy, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fix complete all as specified and as directed.
S&F 15mm bore stop cock, cast copper alloy, concealed type with long shank and cup, screwed down, high pressure, fancy type, with capstan head, screwed both ends for iron pipe or for union and fix complete all as specified and as directed.
S&F 25 mm bore dia gun metal globe or gate valve with iron wheel head, screwed both end for iron pipe all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, tripple layer, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball(minimum weight 210gms) and fixed complete all as specified and as directed.
S&F vitreous China bowl urinal, half stall type, white (minimum), with grating and union for discharge pipe including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), PVC connection, 40mm dia PVC waste pipe & 32mm dia waste coupling of PTMT, half or full threaded, minimum weight- 45gms, providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed.
S & F vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and 32mm bore PVC waste pipe flexible type with one socketed screwed end, 15mm dia PVC connection pipe complete all as specified and as directed.
S&F vitreous china wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S&F vitreous china squatting pan, white, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap/flushing cistren complete all as specified and as directed.
S & F 10 Litres capacity PVC valveless syphonic action type, flushing cistern, high/low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S&F PVC connection, 600mm long, 15 mm bore with PTMT nuts complete all as specified and as directed.
S&F PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to walls or in any other position complete all as specified and as directed
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors complete all as specified and as directed
S&F of 75 mm bore PVC (SWR) bends with access door all as specified and as directed
S&F of 110 mm bore PVC (SWR) bends with access door all as specified and as directed
S&F of 110 mm bore PVC (SWR) slotted vent cowl with access door all as specified and as directed
S&F of 110 mm bore PVC (SWR) branch piece, double (Double Y) equal or unequal with access door all as specified and as directed
S&F of 110 mm bore PVC (SWR) junction double, (Double T) equal or unequal with access door all as specified and as directed
M&L for 150 mm internal dia reinforced cement concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.
M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multi-stranded copper conductor cable of 1100 Volts grade, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) of suitable size and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multi-stranded), PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc for one light/fan point controlled by one, one way switch all as specified and as directed. NOTE: 1.Proper colour coding shall be adoptd for wiring (for phase-RED,YELLOW,BLUE & for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.)
All as per serial item No 78 but for power point 3 pin, switch socket, 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed
All as per serial item No 78 but for power point 5/6 pin Socket outlet, 15 Amp with PVC copper conductor cable multistrand unsheathed 4.0 Sqmm on independent board complete all as specified and as directed.
S&F switch piano, flush type, one way, single pole, 5Amp, 20 volts complete all as specified and as directed.
S&F modular switch, single pole, one way, 6/10 Amps, 1 module complete all as specified and as directed.
S&F modular switch, single pole, one way, 15/16 Amps, 1 module complete all as specified and as directed.
S&F switch socket cobination, 2 in 1, 3 pin, 5 and 15 Amp, flush type complete all as specified and as directed.
S&F modular socket, 6 A/16 amp 2/3 pin, combined, 2 module complete all as specified and as directed.
S&F ceiling rose, surface bakelite, three terminal type complete all as specified and as directed.
S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F LED lights fitting 1x 18W, 220V, AC, decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 5 watt 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in repairs, lamp LED 9/10 Watt, 230 volts, 50 Hz AC complete all as specified and as directed.
S&F exhaust fan 250mm sweep, made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding complete electric connection with suitable size of copper wire including making hole of size 250 mm dia in any type of wall and making good to match the surrounding area/ plywood packing work as per site reqirement all as specified and as directed
S&F sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 12 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 200 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.
S&F, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.
S&F, MCB SPN (DP) 240 volts, 63 Amps ,'C' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.
Supply, installation , testing and commissioning of 25 litres capacity, BEE 5 star rated, AC, 50 Hz, 230 Volts, vertical water heater, storage type, steel body with copper inner tank and heating element upto 2 KW with thermostat, temperature control knob, NRV, safety valve, inlet and outlet ports, connection piece and all acessories all as specified and as directed.
Supply, laying, jointing and testing PVC XLPE insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 16 Sqmm, 2 core, laid in trenches/ passing through pipe/fixed on wall including electric connections on both ends with suitable lugs,binding wire all as required at site all as specified and as directed
M&L for dry river sand in trenches for cushioning (8 cm below the cable and 15 cm above the cable) of underground cable including spreading, levelling, hand punning complete all as specified and as directed. Note:Punned thickness will be measured and paid.
Supply and laying un-reinforced precast concrete cable cover, class LV type-1, flat, size 250 mm x 150 mm x 40 mm complete all as specified and as directed.
S&F, GI tubing, light grade, 40 mm bore dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc all as specified and as directed.
S&F, 35/40 Watt, building mounted LED Security light fitting complete made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required, fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and as directed.
M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.
M/S Tirupati Goroba Shendge
D V Engineers and Contractors Pvt Ltd
M/S. M.A. Sharief engineers and contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .