E-Tender No. 20/2024-25, EUDC-II Noida

Amount

fo|qr forj.k [k.M & prqFkZ] nknjh ds dk;Z{ks= esa jfuax bZ&fufonk }kjk tek ;kstuk en esa vkxkeh 1 o”kZ dh vof/k esa Lohd`r izkadyuksa ds vuqlkj ,yVh@,pVh fo|qr ykbZu] ehVfjax flLVe] ifjorZd ,oa vU; fo|qrhdj.k ra= dh f'kf¶Vax bR;kfn lEcfU/kr leLr dk;Z djus gsrq jafux dkWUVªsDVA

Removal of old and used AB Cable and ACSR Conductor from the both side spans of pole and removal of HT/LT Line accessories from old, damaged, shifted Pole and Carriage of its from work site to JE Store/Any Store Centre of PVVNL Discom including loading and unloading at both ends.

Removal of all line accessories from the Pole and Dismentaling of old, Damaged and Shifted ST/PCC Pole by digging of Pole pit in Pakka/Kacha Road with the help of road cutter/digging machine, Tractor etc and Carriage of old and Damaged ST/PCC Pole from work site to JE Store/Any Store Centre of PVVNL Discom including loading and unloading at both ends.

Carriage of New 8.5mt./9mtr/11Mtr./13 Long PCC and ST Pole from Any Store of PVVNL Discom/Central Store, Shaibabad/Sector 20, Noida/J.E Store to work site including safe loading and unloading at both ends.

Carriage of Single Pole line accessories, Double pole accessories as Cross arm, M.S channel, Angle, V Disc Insulator with fitting, GI Wire, Barbed Wire, Pin Insulator with pin, Distribution Box, Dropper channel, Stay Set, Earthing Complete, Fuse Set, T-off Channel, T/F Base Angle, Termination Kit, Straight Through etc. any other items mentioned in Estimate or material issued from Store as required for complete the work including loading and unloading both ends and Fixing the above accessories on Pole with complete work in all respect.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required for Single Pole as following :

Single support on ST Pole 9/11/13Mtr. Long

Single support on PCC Pole 8.5/9/11Mtr. Long

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Four Pole, Three Pole, Double Pole Structures of PCC and ST Pole .

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. The work are as Follows : Single Pole, Double Pole, Three Pole, Four Pole.

S.T pole 9/11/13Mtr. Long

8.5/9/11 Mtr PCC Poles.

Fixing of Stay set complete (G.I.Stay rod 16x1800mm, Stay wire 5Kg, Guy insulator, G.I.Stay clamp, bolt, nut & wasther) for LT/11KV/33KV line with Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps with Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.

Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting.

Cartage and Laying lifting, stringing & proper sagging of 4/5 phases ACSR conductor (LT/HT) in accordance with Line chart includidng binding and fixing of all accessories in Conductor in parallel as per site requirement for New conductor on H.T/L.T line for New Connection to Consumer with binding, jumpering etc.including complete connections in all respect, from any Store Centre of PVVNL to work site including safe loading and unloading at both ends.

ACSR Conductor.

Carriage of new LT ABC cable 50/70/ 95/120 Sqmm from Store Centre, Sahibabad to work site including safe loading and unloading at both ends with laying, lifting and sagging of ABC cable and fixing of all types clamps & connection with complete work in all respect.

AB Cable

Carriage of 3x50/70/120/185/220/385/300 sqmm of LT/HT cable from any Store Center sector 20,Noida/J.E Store/Ghaziabad/Any Store of PVVNL Discom to work site, loading & unloading both side with Laying and comissioning of LT/HT Double Ckt./SINGLE CKT. by manual method/Trenchless method by digging of trench of size 750 mm wide 1050 mm deep and boxing with brick by three sides, sand, stone slab 600x450x50mm & providing and Fixing of HDPE Pipe as per site requirement and its required filling of trench, leveling and proper rooming .

Preparation of LT/HT Power Cable ends: Making of LT/HT Heat shrinkable outdoor/Indoor jointing kits/Straight Through suitable for different HT/LT XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.

Shifting of 11/0.4 KV, 25/63/100/250 KVA/400/630/1000 KVA T/F from the site and Re-Installation of same T/F at including loading and unloading the T/F on Plinth/Double Pole/as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

Chemcial Earthing of Transformer as per specified Specification given by concerned EE.

Shifting of Metering System and CT/PT with Cubicle/BREAKER/VCB From the site and RE-Installation of same System at proposed site including loading and unloading both sides with mounting on double pole/Meter Room or Plith and making all the connections complete in all respect.

Guarding of LT/HT Line by GI Wire or as per site requirement and Repairing & Tightening of loose Guarding & Re-winding of missing laces on Road Corssing with complete work in all respect.

Laying and Re-Sagging of LT/HT line of ACSR Conductor after shifting and complete work properly as per RESPO.

Laying and Re-Sagging of LT/HT line of AB Cable after shifting and complete work properly as per RESPO.

Tigtening & Re-winding of jumpering at Pole by ACSR Conductor as per site requirement with complete work in all respect.

Supply, Fixing and Errection of the Following material by the Contractor on his own cost.

Different Types of MS Nut & Bolts as per site requirement.

Number Plate

Danger Board

Suspension Clamp

Piercing Clamp

F-Brackets

F Clamp

Holding Clamp

Earth Clamp

Dead End Clamp

J Hook for Suspension

OM SAI ELECTRICALS CO.