Repair and maintenance of Internal Electrical Infrastructure at N1, Nair, Kuldeep and N4 at AFS Kanpur.

Amount

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following :- For one light, fan, call bell.

All as per item No 2 here-in-before but for one socket point controlled by one switch on independent board.

All as per item No 2 here-in-before but For one socket point controlled by one switch on same board.

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L for surface point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including casing caping 20 / 25 mm white / ivory with all accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC / Polycarbonate gang box of appropriate size for fixing of switches / sockets, fan regulators, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing all as specified and directed by Engineer-in-Charge for the following :- For one light, fan, call bell.

All as per item No 6 here-in-before but for one socket point controlled by one switch on independent board.

All as per item No 6 here-in-before but for one socket point controlled by one switch on same board.

All as per item No 6 here-in-before but in casing /caping for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly suitable for modular type face plate/ cover for fixing of modular switch/sockets, fan regualtor including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following :- For one light, fan, call bell.

All as per item No 10 here-in-before but for one socket point controlled by one switch on independent board.

All as per item No 2 here-in-before but For one socket point controlled by one switch on same board.

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L, piano switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

M & L, piano switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

M&L, socket outlet 3 pin, 5 Amps flush type white finish complete all as specified.

S&F, socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F, bell push, flush type universal, 240 V white finish complete all as specified.

S&F, ceiling rose, surface backlite, 65 x 20 mm three terminal .

S&F, regulator rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified.

M & L, modular switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

M & L, modular switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

M&L, modulal socket outlet 5 pin, 5 Amps flush type white finish complete all as specified.

S&F, socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F, modular bell push, flush type universal, 240 V white finish complete all as specified.

S&F, modular regulator rotary, 5 speed step type regulator,2 module 120-230 V white finish complete all as specified.

S&F modular angle lamp holder 240 Volt, 6 Amp complete all as specified.

S & F, in replacement piano switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S & F, in replacement piano switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

S & F, in replacement socket outlet 3 pin, 5 Amps flush type white finish complete all as specified.

S & F, in replacement socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F, in replacement bell push, flush type universal, 240 V white finish complete all as specified.

S & F, in replacement, ceiling rose, surface backlite, 65 x 20 mm three terminal .

S&F in replacement, regulator rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified.

S & F, in replacement, 2 way switch, ISI marked 5 Amp, 240 Volt, flush type .

S & F, in replacement, Electric Bell Ding Dong type , ISI marked ,240 Volt, flush type .

S & F, in replacement, modular switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S & F, in replacement, modular switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

S & F, in replacement, modulal socket outlet 3 pin, 5 Amps flush type white finish complete all as specified.

S & F, in replacement, socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S & F, in replacement, modular bell push, flush type universal, 240 V white finish complete all as specified.

S & F, in replacement, regulator rotary, 5 speed step type regulator,2 module 120-230 V white finish complete all as specified.

S & F, in replacement, modular angle lamp holder 240 Volt, 6 Amp complete all as specified.

S&F in replacement, modular metal flush box 1/2 module

S&F in replacement, modular metal flush box 3 module

S&F in replacement, modular metal flush box 6 module

S&F in replacement, modular metal flush box 8 module

S&F in replacement, modular metal flush box 12 module

S&F in replacement, modular white cover plate with frame 1 module

S&F in replacement, modular white cover plate with frame 3 module

S&F in replacement, modular white cover plate with frame 6 module

S&F in replacement, modular white cover plate with frame 8 module

S&F in replacement, modular white cover plate with frame 12 module

M & L in replacement for anodized MS sunken boxes of required size, made out of MS sheet of thickness not less than 1.5 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge

M & L in replacement PVC / Polycarbonate gang box of 3 way for 5/15A switch socket arrangement appropriate size for fixing of switches / sockets, fan regulators, etc with MS screw and cup washers all as specified and directed by Engineer-in-Charge

M & L in replacement PVC / Polycarbonate gang box of 6 way for 5/15A switch socket arrangement appropriate size for fixing of switches / sockets, fan regulators, etc with MS screw and cup washers all as specified and directed by Engineer-in-Charge

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

All as per item No 57 here-in-before but 4 ways.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB / 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as directed.

S&F in replacement, testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed.

All as per item No 60 but of SP 40-63 Amps.

All as per item No 60 but of SPN 32 Amps.

All as per item No 60 but of SPN 40 / 63 Amps.

All as per item No 60 but of TP 40 / 63 Amps.

All as per item No 60 but of TPN 40 / 63 Amps.

S&F in replacement sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board fixed properly on in concealed position all as directed by Engineer-in-Charge.

S&F in replacement metal clad socket industrial 2pin & earth plug top 20A, 230V complete suitable for AC Box.

S&F in replacement metal plug top 20A, 230V complete suitable for AC Box.

S&F in replacement 15 Amp Plug top , 220V complete all as specified

S&F in replacement modular enclosure , 20A single pole MCB, with a two pin and earth plug and socket complete fixed properly on in concealed position all as directed by Engineer-in-Charge.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in new/existing MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L in replacement of sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified & directed by Engineer in Charge.Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.

M & L in replacement of sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new/existing MS/PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly complete all as specified & directed by Engineer in Charge Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L in replacement of sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as directed by Engineer in Charge. Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.

M & L in replacement sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in new or existing MS / PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly complete all as directed by Engineer in Charge. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L in replacement of sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as directed by Engineer in Charge. Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.

S&F rigid non metallic medium white / ivory PVC conduit medium grade ISI marked of size not less than 20 mm dia concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc all as directed by Engineer-in-Charge.

All as per item No 77 here-in-before but 25 mm dia PVC conduit medium grade ISI marked

S&F rigid non metallic medium white / ivory PVC casing caping medium grade ISI marked of size not less than 25 mm inclusive all fitting and all fixing accessories such as couplers lock, nuts, saddlers, fixed properly all as directed by Engineer-in-Charge.

M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting n . exc 10 cm girth all as directed by Engineer in charge.

M&L in repair for service cable of PVC insulated unsheathed weather proof twin core aluminium solid conductor 6 sqmm complete all as specified and directed.

All as per item ser No 81 above but twin core cable size 4 sqmm.

All as per item ser No 81 above but twin core cable size 10 sqmm.

Material and Labour for 3 core PVC insulated flexible copper conductor cable of size 2.5 sqmm 1100 volt grade and PVC insulated 3 way

Material and Labour for 3 core PVC insulated flexible copper conductor cable of size 1.5 sqmm 1100 volt grade and PVC insulated 3 way

Material and Labour for 3 core PVC insulated flexible copper conductor cable of size 1.0 sqmm 1100 volt grade and PVC insulated 3 way

M&L in replacement for XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade 10 Sqmm 2 core laid in trenches/panel or passing through pipe including connecting with suitable lugs, nuts and bolts and testing complete all as specified and directed

M&L in replacement for XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade 4 Sqmm 2 core laid in trenches/panel or passing through pipe including connecting with suitable lugs, nuts and bolts and testing complete all as specified and directed

M&L in replacement for XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade 10 sqmm 4 core laid in trenches/panel or passing through pipe including connecting with suitable lugs, nuts and bolts and testing complete all as specified and directed

S&F in replacement for energy saver LED light fitting 40 watt, 230 Volts, single tube mounting including LED Tube/ LED blocks 40 Watt ,Lumen OUTPUT NOT LESS THEN 100 LM /WATT with 50000 burning Hours, PF = 0.95 complete with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection three core copper cable from ceiling rose to led light fitting all as directed. Note: Metal level indicating CA No shall be affixed on back of Light fitting. Contractor shall quote their rate considering this point.

S&F in replacement of energy saving LED 4ft Batten 20/22 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV . The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser.

S&F in replacement of energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV bracket with sketch fitting all all as directed.

S&F in replacement complete for recess mounting LED Panel 600x600 mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 31 - 36 watt complete electronic drivers with all internal electric connections complete all as specified.

S&F in replacement complete for recess mounting 1' x 4' LED Luminaire with high transmitive diffuser suitable for indoor spaces fittings made of CRCA powder coated finish LED and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50,000 burning hours @ L70% Lumen maintenance ,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 31 - 36 watt complete electronic drivers with all internal electric connections complete all as specified.

Supply and fixing in repair LED tracklight of 20 watts, ceiling mounted, including drivers etc complete all as specified and directed.

S&F in repair LED spot light 12 Watt, 3000 K, warm white, complete all as specified and directed by Engr-in-charge

S&F in replacement Endural LED bulk head fitting Plastic Body, heat resistant, with specially designed gasket all as per directed by Engr- in - charge.

S & F bldg security light fitting 36 watt LED with pressure die cast housing IP 65 suitable for scondary road/bldgs power consumtion should not be more than 35 watt and power factor should not be less than .90 complete all as per specified and directed. Note: Metal level indicating CA No shall be affixed on back of Light fitting. Contractor shall quote their rate considering this point.

S&F bldg security light fitting 60 watt LED with pressure die cast housing IP 65 suitable for secondary road/bldgs power consumtion should not be more than 18 watt and power factor should not be less than .90 complete all as per specified and directed . Note: Metal level indicating CA No shall be affixed on back of Light fitting. Contractor shall quote their rate considering this point.

S&F in replacement LED Flood light fitting 120 watt, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-65 flood light with high power LEDs as light source, suitable for highlighting architectural tacade highmast and general purpose lighting with all internal electric connections complete all as specified and directed.Note: Metal level indicating CA No shall be affixed on back of Light fitting. Contractor shall quote their rate considering this point.

Supply and fixing new generation , post top ,clear landscape, energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution , spun aluminium landscape IP 65 luminaire with high power LED as light source of capacity 25 watt including necessary electrical connection complete as per Havells Cat Part No. RUBYPT35WLED757PSYMTOPC or equivalent model in Philips/Jaquar/Bajaj as approved by GE all as directed.Note: Metal level indicating CA No shall be affixed on back of Light fitting. Contractor shall quote their rate considering this point.

Supply and fixing new generation , post top ,spring lands cape energy saving environmental friendly, long life aesthetically designed with good indirect symmetrical light distribution , die cast aluminium landscape IP 65 luminaire with high power COB LED as light source of capacity 35 watt including necessary electrical connection all as directed.

Supply and fix of bollard including light lamp having IP65/IK10 with base plate and making all necessary connection including fixing it in the ground with suitable clamping all as required and directed at site.

Supply and fix of slim profile surface mounted downlight 2000 lumen in round safe , 4000K including all fixing arrangement .

S & F LED 8 Watt bulb complete all as specified and directed.

S & F LED 14 Watt bulb complete all as specified and directed.

S & F LED 14 Watt invertor bulb, charging backup of 4 hours, complete all as specified and directed.

Supply & fixing decorative LED luminary suitable for wall mounting 15 / 8 watt retrofit with LED Bulb 8 watt, lamp holder complete made up of polycarbonate including fixing arrangements and making electrical connection complete and taking down old rusted bracket fittings complete all as specified and directed. Make : Philips, Cat Part No : COMET 30575 or equivalent in Wipro / Havells.

Supply and fix energy saving LED 4ft Batten 20 Watt, 2000 lumens, twin glow, LED up and down glow batten (Yellow uplight relax mode and white downlight work mode) aesthetic design, with polycarbonate housing, 240V 50 Hz IP 20 ans PF 0.90 complete all as specified and directed.

M&L in replacement for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, earth plate surroundly filled charcoal and common salt in alternate layer (min 40 Kg charcoal & 40 Kg salt) complete covering the GI plate, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel with and including excavation, PCC (1:3:6) type C-1 (using 20mm graded stone agg) as in chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 8 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia medium grade, lugs etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 complete all as specified and directed. all as specified and directed. Note :- 1) Main earth lead upto 7.5 mtr shall be deemed to be included in unit rate. Beyond above earth lead shall be measured and paid seperetley. 2) Rate quoted shall be inclusive of earth work (Excavation, returning filling and removal) complete. Disposal of spoil to a distance not exceeding 50 metre

M&L in replacement for earth continuity conductor or main earthing lead of 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe complete all as specified and directed.

Receiving complaints from concern Incharge of Internal section (Power House) lodged by the occupants of Internal electrification nature, taking down tube light / CFL fitting/Bracket fittings/Flameproof tube light fittings/ bulkhead flameprrof fittings any wattage from roof /wall and PVC Cables for light/fan/bell/light or power socket complete repairs to the extent by removing connections from the system removing faults in wires, battens, conduit, suck boxes, juction boxes, main switches, MCBs/DBs utility light fitting, lamp holders AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tap, screws, nuts as required to rectifing the fault with record to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engr-in-charge/users. dismantling at site testing of unserviceable item and serviceable and replacement the same and tightening the connections,replacement of unserviceable connecting wire and ensuring the the earth wire is properly connected to earth wire and metallic part of fitting, cleaning of fittings externally and internally after ensuring the serviceablity of fittings & refixing the same at same place or as directed place testing complete. Note - (i)Tube light fitting any type, switch socket, bell push, regulator Choke any type, required for replacement will be paid under relavent item as S& f in replacement of this schedule.

M&L for bracket made out of GI pipe 25mm dia medium grade, 1.2 mtr long bent to shape with welded MS flat 25 x 4 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 4mm thick FI nuts, bolts complete all as directed by Engr-in-charge incl taking down old unsv bracket of any size.

M&L for sheet metal enclosures for independent mounting for MCBs four pole fixing with suitable nut & bolt with washers on wall / panels and suitable connection arrangements for XLPE under ground cables with MCBs including removing UNSV switch fuse unit complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure TPN MCCB DB 8 Way , 415 volt (vertical type) with 250 A bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB upto 160Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed.

S&F sheet metal enclosure TPN MCCB DB 4 Way , 415 volt (vertical type) with bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB 160 Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed.

Supply and fixing in replacement MCCB 160 Amps, 4 Pole, 415V, 25 kA , Ics =100 % Icu -do-.

Supply and fixing in replacement MCCB 125Amps, 4 Pole, 415V, 16 kA , Ics =100 % Icu -do-.

Supply and fixing in replacement MCCB 63 Amps, 4 Pole, 415V, 16 kA , Ics =100 % Icu -do-.

Supply and fixing Electronic Meter 10-60 amps Single phase tamper proof with Class 1 accuracy ,LED Indication for earth leakage, Elegant Polycarbonate Enclosure, High Surge withstand up to 8 kv, anti tamper features, Electromagnetic compatible & 6 digit Display.

M&L for AC three phase dual source with AC sensing, Multifuction Ennergy meter of accuracy class 1.0, 3x240V, 50Hz, with Optical + Modbus RS 485 communication, backlite LCD display of rating 10-60Amp.( Measure & Display, Trivector energy, TOD, Load Survey, Phase wise, V, I ,PF & Frequency , Maximum Demand and with anti tempere feature)

Supply and fixing LED Driver suitable for Garden light upto 15 W ,as per site requirement complete all as specified and as directed. Note:-Make of driver is as per make of fitting available at site

Supply and fixing LED Driver suitable for Gate light upto 35 W ,as per site requirement complete all as specified and as directed. Note : Make of driver is as per make of fitting available at site

Supply and fix in replacement of Energy Efficient Brush Less Direct Current (BLDC) Ceiling fan 1200mm sweep, copper winded , energy efficient 5 star rating complete with down rood , canopy and blades 240 Volt, 50 Hz supply complete all as specified and directed by Engineer in Charge.

Supply and fix in replacement of Energy Efficient Brush Less Direct Current (BLDC) Ceiling fan 1400mm sweep, copper winded , energy efficient 5 star rating complete with down rood , canopy and blades 240 Volt, 50 Hz supply complete all as specified and directed by Engineer in Charge.

Supply and fix in replacement of Exhaust fan 300mm sweep, copper winded , 1400 RPM complete with brackets frme and blades, metallic body heavy duty with lovours suitable size , suitable for 240 Vol, 50 Hz supply complete all as specified and directed by Engineer in Charge.

All as per item no, 126 here in before but 380mm sweep Exhaust Fan

All as per item no, 126 here in before but 450mm sweep Exhaust Fan. Note : For Item No 124 to 128 Old Ceiling/ Exhaust fan shall be deposited to MES store

Supply and fix in replacement of Cabin Fan/ wall fan of 450mm sweep, copper winded , 1400 RPM, oscillating function, complete with brackets frame and blades, metallic body heavy duty with lovours suitable size , suitable for 240 Vol, 50 Hz supply complete all as specified and directed by Engineer in Charge.

Supply ,fix and in replacement of ventilating fan/ fresh air 300 mm , suitable for 240 Volt, 50 Hz supply complete all as directed by Engineer in Charge

Supply ,fix and in replacement of ventilating fan/ fresh air 250 mm , suitable for 240 Volt, 50 Hz supply complete all as directed by Engineer in Charge

Supply ,fix and in replacement of Pedastal fan 450mm weep complete, suitable for 240 Volt, 50 Hz supply complete all as directed by Engineer in Charge Note : For Item No 129 to 132 Old Fans shall be deposited to MES store yard

Lalta Prasad vijay kumar Forwarding Agency (BID ID -3512793)

M/s Sohanil Construction (BID ID -3512488)

SUSHMANAND ENGINEERING WORKS (BID ID -3511317)

PAWAN COOL CORPORATION (BID ID -3509062)