REPAIR TO CERTAIN WOODEN FURNITURE UNDER BSO OF GE (WEST) FEROZEPUR CANTT

Amount

M&L to repairs Bed plywood top by replacing following unserviceable parts with first class teakwood. Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-246) (a) Long leg made out of first class teakwood.

ditto all as per item No 1 above but for short leg made out of first class teakwood.

ditto all as per item No 1 above but for long rail made out of first class teakwood.

ditto all as per item No 1 above but for stiffener made out of IInd class hard wood.

ditto all as per item No 1 above but for top of head rest made out of first class teakwood.

ditto all as per item No 1 above but for bottom of head rest made out of first class teakwood.

ditto all as per item No 1 above but for top of foot rest made out of first class teakwood.

ditto all as per item No 1 above but for bottom of foot rest made out of first class teakwood.

ditto all as per item No 1 above but for complete head rest with 3.5mm thick OSTF plywood

ditto all as per item No 1 above but for 3.5 thick teak face plywood, including half round teakwood beading if broken, of both side of head rest complete.

ditto all as per item No 1 above but for complete foot rest with 3.5mm thick OSTF plywood

ditto all as per item No 1 above but for 3.5 thick teak face plywood, including half round teakwood beading if broken, of both side of foot rest complete.

ditto all as per item No 1 above but for plywood 12mm thick(9 ply) BWR Gde of suitable size in single piece as per shown in drg.

S&F wood tringular support of teak wood with full thread balck screws.

M&L to repair Table Peg by replacing the following unserviceable parts with teakwood /pre-laminated particle board (exterior gde).Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-277) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

ditto all as per item No 15 above but for leg made out of first class teakwood.

ditto all as per item No 15 above but for front rail made out of first class teakwood.

ditto all as per item No 15 above but for side rail made out of first class teakwood.

ditto all as per item No 15 above but for bottom rail made out of first class teakwood.

S&F wood tringular support of teak wood with full thread black screws.

S&F PVC shoe 15 mm dia of approved quality.

M&L to repair Teapoy by replacing the following unserviceable parts with teakwood /pre-laminated particle board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-278) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

ditto all as per item No 22 above but for leg made out of first class teakwood.

ditto all as per item No 22 above but for front rail made out of first class teakwood.

ditto all as per item No 22 above but for side rail made out of first class teakwood.

ditto all as per item No 22 above but for bottom rail made out of first class teakwood.

S&F wood tringular support of teak wood with full thread black screws.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table Center by replacing the following unserviceable parts with teakwood /pre-laminated particle board (exterior gde). Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD- 235/274) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

ditto all as per item No 29 above but for leg made out of first class teakwood.

ditto all as per item No 29 above but for front rail made out of first class teakwood.

ditto all as per item No 29 above but for side rail made out of first class teakwood.

ditto all as per item No 29 above but for bottom rail made out of first class teakwood.

S&F wood tringular support of teak wood with full thread black screws.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table 900mm x600mm without drawer by replacing the following unserviceable parts with first class teakwood /pre-laminated particle board (exterior gde). Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-284) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

ditto all as per item No 36 above but for leg made out of first class teakwood.

ditto all as per item No 36 above but for front/rear rail made out of first class teakwood.

ditto all as per item No 36 above but for side rail made out of first class teakwood.

ditto all as per item No 36 above but for lower rail made out of first class teakwood.

S&F wood tringular support of teak wood with full thread black screws.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table 900mm x600mm with drawer by replacing the following unserviceable parts with first class teakwood /pre-laminated particle board (exterior gde). Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-283) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

ditto all as per item No 43 above but for leg made out of first class teakwood.

ditto all as per item No 43 above but for front/side rail made out of first class teakwood.

ditto all as per item No 43 above but for lower rail made out of first class teakwood.

S&F wood tringular support of teak wood with full thread black screws.

ditto all as per item No 43 above but for back rail made out of first class teakwood.

ditto all as per item No 43 above but for drawer complete excluding knob.

ditto all as per item No 43 above but for front of drawer made out of 18mm thick prelaminated paticle board and 4mmx18mm teakwood beading complete excluding knob.

ditto all as per item No 43 above but for bottom of drawer made out of plywood 6mm thick BWR Gde complete.

ditto all as per item No 43 above but for side/back of drawer made out of 12 mm thick plywood BWR Gde complete.

S&F PVC shoe 20 mm dia of approved quality.

M&L to repair Table 900mm x900mm by replacing the following unserviceable parts with first class teakwood /pre-laminated particle board (exterior gde). Rest all as per drawing and directed. (DRG NO. FD-291) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawing and directed by Engr-in-charge.

ditto all as per item No 54 above but for leg made out of first class teakwood.

ditto all as per item No 54 above but for rail made out of first class teakwood.

S&F wood tringular support of teak wood with full thread black screws.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Hat stand with mirror by replacing the following parts with approved ones. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-233/361) (a) Plywood 3.5/4mm thick OSTF.

ditto all as per item No 58 above but for first class TW beading at all around of frame.

ditto all as per item No 58 above but for mirror 5mm thick.

ditto all as per item No 58 above but for CP Hook/peg 115-120mm long.

ditto all as per item No 58 above but for aluminium nail hook 50mm long.

M&L to repair Table dining 4 person (1200mm x900mm) by replacing the following unserviceable parts with first class teakwood /pre-laminated particle board (exterior gde). Rest all as per drawing and directed by Engr-in-charge.(DRG NO. FD/MAP-II/03) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawing and directed by Engr-in-charge.

ditto all as per item No 64 above but for leg made out of first class teakwood.

ditto all as per item No 64 above but for front/rear rail made out of first class teakwood.

ditto all as per item No 64 above but for side rail made out of first class teakwood.

ditto all as per item No 64 above but for stiffener made out of IInd class hard wood.

S&F wood tringular support of teak wood with full thread balck screws.

M&L to repair Table dining 6 person by replacing the following unserviceable parts with teakwood /pre-laminated particle board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-FD/MAP-II/03) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

ditto all as per item No 70 above but for leg made out of first class teakwood.

ditto all as per item No 70 above but for front rail made out of first class teakwood.

ditto all as per item No 70 above but for side rail made out of first class teakwood.

ditto all as per item No 70 above but for stiffener made out of first class teakwood.

S&F wood tringular support of teak wood with full thread balck screws.

M&L to repair Table dressing gents MAP by replacing the following unserviceable parts with first class /teakwood/pre-laminated particle board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/16) (a) Top portion made out of 18mm thick pre-laminated particle board (exterior gde) with 6mm thick teak wood in front side wall including dismantling of unsv components. Rest all shown on drg all as specified and directed. Drg. No (FD/E6/MAP/16).

ditto all as per item No 76 above but for bottom portion

ditto all as per item No 76 above but for side portion

ditto all as per item No 76 above but for looking mirror 5mm thick alongwith frame and supporting ply complete. Rest all shown on drg all as specified and directed.

ditto all as per item No 76 above but for back of table dressing gents MAP made out of 12mm thick plywood BWR grade including 4" long mild steel hanging plate 2 Nos , Rest all shown on drg all as specified and directed.

S&F of 03 Nos glass shelves of size 600mmx100mm, 5mm thick complete. Rest all as per drawing and directed.

M&L to repair Table dressing ladies (FD/MAP-II/07) by replacing the following unserviceable parts with first class teakwood/pre-laminated particle board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed by Engr-in-charge. (FD/MAP-II/07) (a) Top (centre portion) made out of 18mm thick prelaminated particle board exterior quality with teak wood beading in front of centere portion. Rest all as per shown on drawing and complete all as specified and as directed by Engineer - in- Charge.

ditto all as per item No 82 above but for top of cabinet.

ditto all as per item No 82 above but for side of cabinet

ditto all as per item No 82 above but for bottom of cabinet.

ditto all as per item No 82 above but for shutter of cabinet with SS hinges.

ditto all as per item No 82 above but for back portion complete.

ditto all as per item No 82 above but for looking mirror 5mm thick alongwith frame as per shown on drawing complete all as specified and as directed by Engineer- in-Charge.

ditto all as per item No 82 above but for drawer with 1 Set telescopic channel complete.

S&F magnatic catcher of approved quality.

ditto all as per item No 82 above but for top portion of Stool dressing cushion made out of 12mm thick plywood with teak wood all round the top including folding handles complete. Rest all as per shown on drawing (FD/MAP-II/07) and complete all as specified and as directed by Engineer - in- Charge.

ditto all as per item No 82 above but for bottom portion complete

ditto all as per item No 82 above but for back/side portion made out from 18/19mm pre-laminated particle board (exterior gde) of Stool dressing cushion as per drawing.

Replacing foam cushion 75 mm thick 40 density covered with tapestry cloth including stiching complete of Stool dressing cushion. Note:- Cost of tapestry cloth shall not be less than 200/-per mtr, quality and color approved Engr-in-charge.

S&F heavy duty revolving nylon double wheels approved quality for Stool dressing cushion.

M&L to repair Side board by replacing the following items with teakwood /pre-laminated particle board (exterior gde)/ plywood BWR Gde.Rest all as per drawings and directed by Engineer-in-Charge. (DRG NO. FD-371) (a) Top made of 18/19 mm thick pre-laminated particle board (exterior gde), one side with approved shade and balancing white lamination on other side duly provided first class teakwood beading infront of suitable size.

ditto all as per item No 96 above but for bottom complete.

ditto all as per item No 96 above but for side complete.

ditto all as per item No 96 above but for partition complete.

ditto all as per item No 96 above but for single shutter duly provided teak wood beading on edges complete excluding knob.

ditto all as per item No 96 above but for shelf 12mm thick complete.

ditto all as per item No 96 above but for back ply 12mm BWR grade complete.

ditto all as per item No 96 above but for legs with complete frame made out from first class teak wood.

ditto all as per item No 96 above but for drawer complete excluding knob.

ditto all as per item No 96 above but for front of drawer made out of 18mm thick pre-lemanated particle board and 4mmx18mm teak wood beading excluding knob.

ditto all as per item No 96 above but for bottom of drawer made out of plywood 6mm thick BWR Gde complete.

ditto all as per item No 96 above but for side/back of drawer made out of 12mm thick (9 Ply) plywood BWR grade complete.

M&L to repair Bin linen multipurpose by replacing the following items with teakwood /pre-laminated particle board (exterior gde)/ plywood BWR gde. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/09) (a) Top made of 18mm thick pre-laminated particle board (exterior gde), one side with approved shade and balancing white lamination on other side duly provided first class teakwood beading infront of suitable size.

ditto all as per item No 108 above but for bottom complete.

ditto all as per item No 108 above but for side complete.

ditto all as per item No 108 above but for partition complete.

ditto all as per item No 108 above but for single shutter (left) duly provided teak wood beading on edges complete excluding knob.

ditto all as per item No 108 above but for single shutter (right) duly provided teak wood beading on edges complete excluding knob.

ditto all as per item No 108 above but for shelf (left) complete.

ditto all as per item No 108 above but for shelf (right) complete.

ditto all as per item No 108 above but for back ply 12mm thick (9 Ply) BWR grade.

ditto all as per item No 108 above but for legs with complete frame made out from first class teak wood.

ditto all as per item No 108 above but for drawer complete excluding handle

ditto all as per item No 108 above but for front of drawer made out of 18mm thick pre-laminated particle board (exterior gde) and teak wood beading of suitable size excluding handle.

ditto all as per item No 108 above but for bottom of drawer made out of 18mm thick pre-laminated particle board (exterior gde) complete.

ditto all as per item No 108 above but for side/back of drawer made out of 18mm thick pre-laminated particle board (exterior gde) and teakwood beading of suitable size.

S& F CP handle 100mm long of approved quality.

M&L to repair Table writing by replacing the following unserviceable parts with first class teakwood/pre-laminated particle board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed. (DRG NO. FD-275). (a) Top made of 18mm thick pre-laminated particle board (exterior gde) one side with approved shade and balancing white lamination on other side duly teak wood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engrs-in-charge.

ditto all as per item No 123 above but for leg made out of first class teakwood complete.

ditto all as per item No 123 above but for front rail complete.

ditto all as per item No 123 above but for side rail complete.

ditto all as per item No 123 above but for side stiffener complete.

ditto all as per item No 123 above but for center stiffener complete.

ditto all as per item No 123 above but for side of cabinet complete.

ditto all as per item No 123 above but for bottom of cabinet complete.

ditto all as per item No 123 above but for shutter of cabinet complete.

ditto all as per item No 123 above but for back of cabinet made out of plywood 6mm thick BWR gde.

ditto all as per item No 123 above but for shelf of cabinet made out of plywood 12 mm thick BWR gde complete.

ditto all as per item No 123 above but for drawer complete excluding knob.

ditto all as per item No 123 above but for front of drawer made out of 18mm thick pre-laminated particle board and 4mmx18mm teak wood beading complete excluding knob.

ditto all as per item No 123 above but for bottom of drawer made out of plywood 6mm thick BWR Gde complete.

ditto all as per item No 123 above but for side/back of drawer made out of 12 mm thick (9 Ply) Plywood BWR gde complete.

S&F wood tringular support of teak wood with full thread balck screws.

M&L to repair Sofa set 5/4 seater by replacing the following unserviceable parts with first class teakwood.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-281/373) (a) Leg made out of first class teak wood.

ditto all as per item No 139 above but for arm made out of first class teak wood.

ditto all as per item No 139 above but for side rail made out of first class teak wood.

ditto all as per item No 139 above but for batton seat/back made out of first class teak wood.

ditto all as per item No 139 above but for front rail of single seater made out of first class teak wood.

ditto all as per item No 139 above but for front rail of three seater made out of first class teak wood.

ditto all as per item No 139 above but for back rest rail top/side of single seater made out of first class teak wood.

ditto all as per item No 139 above but for back rest rail side of three seater made out of first class teak wood.

ditto all as per item No 139 above but for back rest rail top of three seater made out of first class teak wood.

Removing old foam cushion with tapestry cloth and S&F new P.U.Foam cushion of size 21"x22"x4" (40 density) duly covered with approved quality of tapestry cloth.Make of foam cushion:- sleepwell (Feather Foam) / Kurl-on (Komfort universe goldline plus) / Corfom (Premium Foam) . Note:- Cost of tapestry cloth shall be between Rs 200/- to Rs 250/- per mtr.

Removing worn out tapestry cloth from old cushion and replacing the same with new tapestry cloth of approved quality. Note:- cost of tapestry cloth shall be between Rs 200/- to Rs 250/- per mtr.

M&L to repairs Chair dining by replacing the following unserviceable parts with first class teak wood/approved ones. Rest all as per drawing & as directed. (DRG NO. FD-279/228) (a) Front leg made out of first class teak wood.

ditto all as per item No 150 above but for rear leg made out of first class teak wood.

ditto all as per item No 150 above but for stiffener made out of first class teak wood.

ditto all as per item No 150 above but for back rest made out of first class teak wood.

ditto all as per item No 150 above but for rail made out of first class teak wood.

S&F wood tringular support of teak wood with full thread black screws.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair dining by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

M&L to repair Chair dining MAP by replacing the following unserviceable parts with first class teakwood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD/MAP-II/05 ) (a) Front leg made out of first class teak wood.

ditto all as per item No 158 above but for rear leg made out of first class teak wood.

ditto all as per item No 158 above but for stiffener made out of first class teak wood.

ditto all as per item No 158 above but for back rest made out of first class teak wood.

ditto all as per item No 158 above but for rail made out of first class teak wood.

S&F PVC shoe 15mm dia of approved quality.

PVC Seat 4x10mm thick RIBS moulded alongwith seat in single piece of approved quality.Make-Amko/Swastik

S&F teakwood stiffener of suitable size 20mmx20mm thick beneath PVC seat to support PVC seat.Rest all as directed by engr-in-charge.

S&F wood tringular support of teak wood with full thread balck screws.

M&L to repair Chair dining cushioned MAP by replacing the following unserviceable parts with first class teakwood/approved ones. Rest all as as per drawings and as directed. (Drg No FD/MAP-II/04) (a) Front leg made out of first class teak wood.

ditto all as per item No 167 above but for rear leg made out of first class teak wood.

ditto all as per item No 167 above but for rail made out of first class teak wood.

ditto all as per item No 167 above but for stiffener made out of first class teak wood.

ditto all as per item No 167 above but for vertical strip made out of first class teak wood.

ditto all as per item No 167 above but for replacing only tapestry cloth on seat cushion. Note :- Cost of Tapestry cloth will be not less than Rs.200/- meter, quality and colour as per directed by Engr -in- charge.

ditto all as per item No 167 above but for replacing of foam 75mm and 40 density, Make of foam sleepwell (Feather Foam) / Kurl-on (Komfort universe goldline plus) / Corfom (Premium Foam) quality and colour approved by Engr -in- charge.

ditto all as per item No 167 above but for replacing only Plywood 12mm thick (9 ply) BWR gde.

S&F wood tringular support of teak wood with full thread black screws.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-229) (a) Leg made out of first class teak wood.

ditto all as per item No 177 above but for frame front/back of seat made out of first class teak wood

ditto all as per item No 177 above but for frame side of seat made out of first class teak wood.

ditto all as per item No 177 above but for frame top/bottom of back made out of first class teak wood.

ditto all as per item No 177 above but for frame side of back made out of first class teak wood.

ditto all as per item No 177 above but for arm made out of first class teak wood.

ditto all as per item No 177 above but for rail made out of first class teak wood.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair easy by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

M&L to repair Chair writing by replacing the following unserviceable parts with first class teak wood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-280) (a) Front leg made out of first class teak wood.

ditto all as per item No 186 above but for Rear leg made out of first class teak wood.

ditto all as per item No 186 above but for arm made out of first class teak wood.

ditto all as per item No 186 above but for stiffener made out of first class teak wood.

ditto all as per item No 186 above but for back rest made out of first class teak wood.

ditto all as per item No 186 above but for rail made out of first class teak wood.

S&F wood tringular support of teak wood with full thread balck screws.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair writing by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

M&L to repair Table bed side (MAP) by replacing the following parts with pre-laminated particle board (exterior gde)/plywood BWR gde. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R)) (a) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side with approved shade and balanceing vide on other side duly provided with teakwood beading of suitable size.

ditto all as per item No 195 above but for side made out of 18mm thick pre-laminated particle board (exterior gde) one side with approved ahaded balancing vide on other side complete.

ditto all as per item No 195 above but for back made out of plywood 6mm thick BWR Gde.

ditto all as per item No 195 above but for bottom complete.

ditto all as per item No 195 above but for upper drawer complete excluding handle.

ditto all as per item No 195 above but for lower drawer complete excluding handle.

ditto all as per item No 195 above but for telescopic channel on both side drawer.

Taking out UNSV 18mm square pipe and S&F new 18mm square pipe including cutting, welding, turning, bending etc with one coat of red oxide primer and two coat of black enameled paint. Rest all as per drawings and directed by Engr-in-charge.

Taking out UNSV handle and S&F new CP handle 100mm long of approved quality.

S&F PVC/Hard rubber toe of suitable size.

Taking out carefully old existing Knob from side board, table writing, Table 3'x2' w/drawer, table dressing gents, table dressing ladies etc and S&F new decorative Knob 25mm dia of approved quality. Rest all as directed by Eng-in-charge.

POLISHING TO WOODEN FURNITURE M&L for preparation of old wooden polished surface of Bed Plywood top (FD-246), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed by Eng-in-charge.

ditto all as per item No 206 above but for Table peg. FD-277

ditto all as per item No 206 above but for Teapoy. FD-278

ditto all as per item No 206 above but for Table centre. FD-235/ 274

ditto all as per item No 206 above but for Table 900mmx600mm with /without drawer. FD-284/283

ditto all as per item No 206 above but for Table 900x900x760mm. FD-291

ditto all as per item No 206 above but for Hat Stand with Mirror. FD-233/361

ditto all as per item No 206 above but for Table dining 4 persons. FD-FD/MAP-II/03

ditto all as per item No 206 above but for Table dining 6 persons. FD-FD/MAP-II/03

ditto all as per item No 206 above but for Table dressing gents/MAP. FD/E6/MAP/16

ditto all as per item No 206 above but for Table dressing ladies. (FD/MAP-II/07)

ditto all as per item No 206 above but for side board. FD-371

ditto all as per item No 206 above but fort Bin Linen multipurpose. FD/E6/MAP/09

ditto all as per item No 206 above but for Table writing. FD-275

ditto all as per item No 206 above but for Sofa set 5seated. FD-281/373

ditto all as per item No 206 above but for Sofa set 4 seated. FD-281/373

ditto all as per item No 206 above but for Chair dining. FD-279/228

ditto all as per item No 206 above but for Chair dining MAP. FD/MAP-II/05

ditto all as per item No 206 above but for Chair dining cushioned MAP. FD/MAP-II/04

ditto all as per item No 206 above but for Chair easy.FD-229

ditto all as per item No 206 above but for Chair writing. FD-280

ditto all as per item No 206 above but for Table bed side (MAP) FD/E6/MAP/15®

M/S Pee Kay Builders (BID ID -3382109)

Dee Kay EnterPrises (BID ID -3381487)

VRTRADERS (BID ID -3384578)

M/s Sham and Company (BID ID -3383111)

B.L. Chaudhri and Co. (BID ID -3383091)

M/S CHAWLA CONSTRUCTION COMPANY (BID ID -3384087)

M/s Vishant Construction Co (BID ID -3383124)