SPL REP TO BLDG NO T-558 P-191 AND T-662 BATHROOM AND TOILET WITH DRAIN WK 18 MADRAS AT DALAPCHAND AND SPL REP TO BLDG NO P-31 AND P-30 AT AP ALGARAH AND PROVN OF VEH PARKING SHED AND PAVER BLOCK NEAR BLDG NO P-278 AND PROVN OF SMART STREET LIGH

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning filling in and rammin earth or broken rubble mixed with earth around in layers not exc 25 cm watering, and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil.

Fixing only of structural mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section) complete all as specified and directed.

S&F structural mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet with approved profile and 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in ridge all as specified and directed by Engr-in-Charge.

Demolition of precast concrete block walling and precast concrete articles etc, built in cement mortar complete all as specified and directed.

M&L for pre-cast cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) block masonry with machine pressed solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description from stone walls incl raking out joints hacking for key, scrubing down with water etc., complete all as specified and directed.

M&L for 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) complete all as specified and as directed.

M/L for 10mm thick rendering cm (1:6) on other than fair faces of brick or concrete surfaces of internal walls finished even and smooth without using extra cement complete all as specified and directed.

M & L 10mm thick rendering on fair faces of brick work concrete surface in CM (1:4) on external wall even and fair with WPC and WPC mrasured separately.

M & L 15 mm thick rendering on fair faces of brick work, block work or concrete surfaces in cement plaster (1:4) incl finished even and smooth w/o using extra cement all as specified.

Material Supply integral Water Proofing Compound.

M&L for three coats of white wash on newly prepared internal and external wall surfaces complete all as specified and directed.

M & L for preparing old surfaces, two coats of cement base paint over a coat of alkali resistant primer on external walls incl watering etc., complete all as specified and directed.

M & L for applying two coat of cement base paint over a coat of primer including preparation of newly plastered surfaces complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B1 using 20mm graded stone agg as in flooring finished even and smooth using extra cement complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

M&L for 1.6mm thick MS Plates (plain or chequered) channels, in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts;square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 150mm size aluminium handle cast type anodised complete all as specified and directed.

Supply only 125 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed.

Supply only 300mm long MS sliding door bolts, bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply only 150 mm size MS Pressed handle, oval type, stove enamelled black and fixed complete all as specified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified and directed by EIC.

S & F in repair 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F only 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded). (Minimum weight 32 mm -45 gms) complete all as specified and directed.

S & F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement morter bedding (but not backing) removing serviceable tiles to store & rubbish of the premises.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L glazed ceramic coloured tiles (300 x 200mm) x 7mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections incl cleaning for re fixing or removal to store all as specified.

S&F 15mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including for re fixing or removal to store complete all as specified and directed.

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe complete all as specified and directed.

S & F in repair 15mm stop cock/Angle valve cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

S & F butt hinges medium weight cold rolled mild steel and fixed to chowkats 100 mm size all as specified.

M&L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs soap dish vitreous china white approx size 160x160x90mm complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

M&L for demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc., complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L chequered cement concrete tiles 300 x 300 x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15 mm thick screed bed in CM (1:6) all as specified and as directed.

S&F in repairs brass chromium plated D type tubular towel bar of 20mm dia fancy type 60cm long between flanges complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigmnet any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 Grade with colour rubber finishes on top over sand dust cushions complete all as specified and directed. Note - Sand for cusioning will be measured and paid seperatly

M & L for sand filling ( as cusioning under interlocking paver block) including watering and consolidation complete all as specified .

M&L for cement concrete Type B-1, (1:2:4) (using 20mm graded stone aggregate) as in kerbs for interlocking tiles etc complete all as specified and directed.

M & L 75 mm thick PCC type C2, (1:3:6) (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L broken stone or boulders hardcore of gauge n. exc 63 mm, deposited, spread and levelled in layersn exc, 15 cm thick, watered and rammed to a floor/ true surface complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.

M/L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and as directed.

All as per item No.74 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board complete all as specified and as directed.

All as per item No.74 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5 amps, one way complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal complete all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F in replacement lamp holder, PVC / Polycarbonate type and back plate suitable for batten fitting complete all as specified and as directed.

S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 12 W complete all as directed.

S&F LED security light suitable for 35 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 25mm dai GI bracked fixed on wall by means of nuts, botls and clamps complete all as specified and as directed.

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as specified and as directed.

Supply and fixing MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve complete all as specified and as directed.

Supply and fix MCB single pole (SP), 10 kA of 5 -32 Amps capacity 240 Volts, 'C' curve complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1 : 3 : 6) type C-1 , 50 mm thick pre cast RCC (1 : 2 : 4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

Supply and fix Smart Street light presure Die cast aluminium housing 70W streetlight, Lumen 9800, System Efficacy 140lm/W, CCT 5700k, CRI 71, IP66, IK10, SDCM<5, Input Voltage 220-240v, power Factor (Full Load) 0.95 , Power Factor (Half Load ) 0.9, Inbuilt surgre protection Protection 4KV, Single piece die cast including spigot, dia 48-76mm, LED lifetime 75K Hrs with Integrated optical Cover. streetlight should have standalone lighting control system with AUTO on/off based on Dusk/Dawn timings, preset time setting with monthly variation (Jan to Dec) , inbuilt Real time clock for switching, includes dimming profile for enegy savings , drift not exceeding max 2mins per year , clock retention upto five years , auto switching off secondary power for moudle , dimmable driver based on PWM control , dim to off with High/ Low Voltage cut off with 440V protection for 8 hrs for complete luminarie including driver and Astro module, EMI/EMC complaint as per EN55015, IEC61547, Surge protection as per IEC 61000-4-5, driver meeting IEC61347, complete luminarie meeting IEC60598-2-3-2002. of Philips (Signify) Cat No BRP501 LED098 CW R3C PSU S1 AS E or equivalent in Havells/Crompton/Bajaj

S & F steel tubular swaged pole complete with cast iron base plate, finial taper plug, bots, nuts and screws, pole cap all as specified type 410 SP – 31 ( 9 mtr long ) as per IS 2713-1980 including bend and connected items for housing of street light all as specified and as directed.

M & L for Plain Cement Concrete (1:3:6) mix type C2 (using 40 mm graded stone aggregate) in foundation, filling and mass-concrete etc for pole, stay etc all as specified and directed by Engr-in-charge.

M & L for Plain Cement Concrete (1:2:4) type B1 (using 20 mm graded stone aggregae) as in copping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to even and smooth without using extra cement all as specified and directed by Engr-incharge.

Supply and Laying in replacement u/s cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables of Size of 16 Sqmm 4 core (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall/in Trench with the help of shadel of following size as required at site.

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for foundation and getting out including forming bottom surface to required level or slope, complete all as specified and directed by Engineer-in- Charge.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers in trenches complete all as specified and directed. Note :- Only Puned layers shall be measured for payment

M&L for well burnt bricks, sub class 'B' bricks of size 250mmx125mmx75mm, best quality locally available laid flat dry in trenches for cable protection complete all as specified and as directed.

M&L for painting of steel tubular pole of any size , vertical complete with cross arms with one coat of aluminium paint after cleaning and preparation of surfaces of poles, cross arms, painting 30 cm wide Yellow and black strip on poles up to 1.5 mtr high above coping level and numbering of size 70mmx40mm by using stencil to the pole with black synthetic enemal paint (1st grade ) complete all as directed.

M & L in for DK Thermoplastic cable junction boxes IP 65 with of size 300x200x105 of metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut and bolts and incl provn for fixing 01 No. of single pole MCBs 6-32 amps,10KA and MCB TP 6-32 amps, 10 KA, ‘C’ series 01 No inside the box incl taking down old u/s junction box complete all as specified and directed. Make : Sintex/Hensal or equivalent approved by GE.

S&F in repairs automatic street/security light switch of rating 8 KW in three phase using nature switch for automatic switching of street lights based on lux level on nature light. The sensor (Nature Switch) along with suitable power contactor, MCB and supprot terminals should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade special moulding compound (Polycarbonate) conforming to IP 54 complete all as specified and as directed. along with each contactor 25-32 Amps , Incoming-Outgoing MCBs (03 Nos each) rating : 32 Amps, circuit wiring min 10 sqmm. Model - NAVDEEP-66 - -8KW3P. MAKE- 1.Nature-Nature Switch : Kakatiya Energy systems Pvt. Ltd / HEALER / BAJAJ / Havells 2.Contactor : BCH / L& T / Schneider 3.MCB : Hager / Schneider /L&T/C&S 4. Circuit wiring : Finolex / Polycab or equivalent.

Supply only 1100 volts grade heavy duty cable PVC insulated and FR PVC rounded sheathed, copper conductor (flexible) industrial cable, conforming IS: 694 of size 1.5 sqmm 3 core laid along pole from junction box to light fitting complete all as specified and directed.

M & L GI tube light grade 25MM for passing through cables under the floor, along the wall or along the pole of following bore dia and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc including taking down old GI tubing complete all as specified.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

G K SUTHAR (BID ID -3256180)

MS BRAHMA CONSTRUCTION (BID ID -3256182)

M/S JAYSHREE CONCERN (BID ID -3256800)

HEM RAJ GURUNG (BID ID -3256151)

GYANENDRA THAPA (BID ID -3256123)

R N De (BID ID -3255708)

Sri Gupta Construction (BID ID -3254426)