SPECIAL REPAIR TO Ops AND TECH COMPLEX AT 51 SQN AT 1 WING AF SRINAGAR

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, Complete all as specified and directed.

Material and Labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, Complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, and removal of of debris to outside of defence land, Complete all as specified and directed.

Material and Labour for for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, Complete all as specified and directed.

Material and Labour for for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement including water proofing compound Complete all as specified and directed. Make :- WPC shall be measured & paid seperately

Supply only water proofing compound, Complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty, complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and directed.

Material and Labour for complete removal of existing treatment from the old plastered wall surfaces and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty, Complete all as specified and directed.

Material and Labour for complete removal of existing treatment from the old plastered, pointed/concrete wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc 1.50 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, Complete all as specified and directed.

Supply and fixing of aluminium frame for doors, windows, ventilators with powder coating (minimum thickness of powder coating 50 micron) of any colour, with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

Supply and fixing of aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., Complete all as specified and directed.

Supply and fixing of Aluminium powder coated, three track sliding window outer frame top & sides of size 62 mm X 29.5mm X 1.5mm weighing not less than 0.807 Kg/m, frame bottom of size 62mm x29.5mm x1.5mm weighing not less than 0.902 kg/m, shutter plain vertical of size 39mm x20mm x2.0mm weighing not less than 0.634 kg/m, shutter bottom horizontal frame size 40mm x 20 mm x1.5 mm weighing not less than 0.484 kg/m, with powder coating of minimum thickness 50 micron with one or more rebates, sliding type without sash bars, 4mm thickness plain glass, rubber packing, snap beading screws etc.complete all as specified and directed.

Material and Labour for 6mm thick aluminium grill powder coated (minimum thickness of powder coating 50 micron) and fixing over U channel as per pattern, Complete all as specified and directed.

Supply and fixing of aluminium composite panels, 5mm thick as in doors, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions, Complete all as specified and directed.

Supply and fixing of 5.5 mm thick sheet glass, ordinary quality with 25 micron solar control film reflective type sticked to glass panes as per manufacturer's instructions and glazing with glazing clips/oil putty in squares exceeding 0.5 Sqm in each pane, Complete all as specified and directed.

Supply and fixing of 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, Complete all as specified and directed.

Supply and fixing of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, Complete all as specified and directed.

Supply and fixing of door closer hydraulicaly regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg Complete all as specified and directed.

Material and Labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe-290, Gde-E-165, Complete all as specified and directed.

Supply and fixing of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

Material and Labour for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer, Complete all as specified and directed.

Supply and fixing in repairs drapery rod 25mm dia fancy type mild steel plastic coated inculding MS funnel and MS brackets, Complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, fillets etc, Complete all as specified and directed.

Supply and fixing GI clip-in perforated/plain false ceiling system with steel tile of size 600 mm x 600 mm and 0.5mm thick, to be laid in true horizontal level suspended on regular modified polyester coated galvanized steel T - grid (z-120 gms minimum, total zinc coating mass of both sides, 240 mph yield stress). Frame work comprising of main T-runners of size 15x32mm of length 3000mm, cross - T of size 15x32mm of length 1200mm and secondary intermediate cross- T of size 15x32 mm of length 600mm to form grid module of size 600x600mm, galvanised iron wall angle of size 24x24x0.4mm of length 3000mm to be fixed on periphery wall/partition.Frame work to be fixed with ceiling/truss by suspender using galvanized steel clip -in-profiles of size 38mm x 20mm, 4mm rod galvanized 80 GSM, SS butterfly clip 80x30x0.8mm and L- type level adjuster of size 85x25x2mm. The fixing arrangment shall be all as per manufacturer's instructions and section of frame work mentioned shall not be less than of size mentioned in item. (Makes :- ARMSTRONG, HUNTER DOUGLUS, HI STEEL, SAINT GOBAIN, DURLUM)

Supply and fixing in repairs wooden panelling of second class softwood 12mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or rectanglular in section clean sawn, secured with nails/screws of sectional area exc 13 Sqcm and n exc 25 Sqcm and exc 90cm centre to centre in both direction and including three coats of french polishing on all the exposed surfaces, Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and directed.

Material and Labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over, with and including 15mm thick screed bed or bedding layer in CM(1:6), Complete all as specified and directed.

Material and Labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over, with and including 10mm thick backing plaster in CM(1:4), Complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, Complete all as specified and directed.

Material and Labour for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate), as in sub base, Complete all as specified and directed.

Material and Labour for machine cut kota stone slab flooring 20-25mm thick as in flooring/skirting over, with and including 20 mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed wiith pigment to match the shade of the slab including rubbing and polishing, Complete all as specified and directed.

Material and Labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., Complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, Complete all as specified and directed.

Supply and fixing of 15 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, Complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, Complete all as specified and directed.

Supply and fixing of 20 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, Complete all as specified and directed.

Material and Labour for lagging to 20mm dia pipes, all arround with 25mm thick bonded mineral wool pre-formed `SNAP ON` pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh, Complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting including dismantling existing tank and removing to store, Complete all as specified and directed.

Supply and fixing in repairs ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed , Complete all as specified and directed.

Supply and fixing in repairs gun-metal gate valves for 20mm bore pipe, (ISI marked) with iron wheel head, screwed both end for iron pipe or for socket or union , Complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, and removal of debries from site, complete all as specified and directed.

Supply and fixing of 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275, Complete all as specified and directed.

Supply and fixing of 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, Complete all as specified and directed.

Material and Labour for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described including preparing new zinc (or galvanised) surface to recieve painting, by coating with mordant solution including washing & cleaning etc and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer in CCD pattern as approved by the GE, Complete all as specified and directed.

Material and Labour for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) in CCD pattern as approved by the GE, complete all as specified and directed.

Material and Labour for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint), Complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, Complete all as specified and directed.

Material and Labour for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (using 20 mm graded stone aggregate), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, Complete all as specified and directed.

Material and Labour for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, Complete all as specified and directed.

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick flat fair finished surfaces,complete all as specified and directed.

Fromwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls,floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc 10cm wide Complete all as specified and directed.

Excavation in trenches in soft/loose soil, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out, Complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), Complete all as specified and directed.

Material and Labour for PCC 1:3:6, type C2 (using 40mm graded aggregate) as in foundations,filling and mass concrete,Complete all as specified and directed.

Material and Labour for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregates) as in sub base, Complete all as specified and directed.

Material and Labour for sand cushioning for laying interlocking tiles, Complete all as specified and directed.

Material and Labour for machine pressed rubber moulded precast concrete interlocking paver blocks any shape and size of any pattern confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments, Complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm, complete all as specified and directed.

Removing excavated material to a distance n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

Taking down copper/aluminium point wiring (light,fan,socket & power) complete including fixtures and fittings such as switches,ceiling rose,pendent holdes,regulators,sockets,light fitting etc and making good disturbed surface of wall,floor etc complete as specified and directed.

Material and Labour for Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc complete all as specified and directed. for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan point controlled by one way switch 6 amps 240 volts

One 3 pin 6 Amps switch socket outlet point on independent board

One 3 pin 6 Amps switch socket outlet point on same board

Material and Labour for Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts, complete all as specified and directed. Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

Supply and fixing of modular one way switch 6 Amp 240 volt marked light/fan suitable for one model etc Complete all as specified and directed.Make- Legrand/ Anchor/ Havells.

Supply and fixing of Modular 6 Amp 5 pin universal socket suitable for two model , 250 volts complete all as specified and directed. Make Legrand/ Anchor/ Havells.

Supply and fixing of modular switch one way 16 Amps 240 volts suitable for one model complete as specified and directed Make- Legrand/ Anchor/ Havells.

Supply and fixing of Modular 6/16 Amp socket suitable for two model , 250 volts Complete all as specified and directed. Make Legrand/ Anchor/ Havells.

Supply and fixing of modular step type two model fan regulator suitable for 120 watt 250 volts Complete all as specified and directed. Make- Legrand/ Anchor/ Havells.

Material and Labour for ceiling rose with three terminal as per relevant IS Complete all as specified and directed. Make SSK/havells/legrand /Anchor

S&F decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 20 watt luminaire Complete all as specified and directed..Make:- CG/ C&S /Havells /Crompton.

Supply and fixing of decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 10 watt luminaire Complete all as specified and directed..Make:- CG/ C&S /Havells/Crompton.

Supply and fixing of recess mounting LED 36 Watt (2'x2') ultra slim ceiling light with extruded aluminium housing and milky diffuser including suitable size driver and 3 core flexible cord from ceiling rose to connector of fitting etc Complete all as specified and directed. Make : CG/ C&S/ Havells/Crompton.

Supply and fixing of recess mounting LED 18 watt (1'x1') ultra slim ceiling light with extruded aluminium housing and milky diffuser including suitable size driver and 3 core flexible cord from ceiling rose to connector of fitting etc Complete all as specified and directed. Make : CG/ C&S/ Havells/Crompton.

Supply and fixing of Energy saving new generation 20 W LED IP 65 bulkhead luminaire with opal diffuser etc Complete all as specified and directed.. Make : CG/ C&S/ Havells/Crompton.

Supply and fixing of in repair LED flood light 50 watt IP66 high power flood light with pressure die cast aluminium housing complete with all accessories including 3 core flexible cable from ceiling rose to connector of fitting etc Complete all as specified and directed. Make : CG/ C&S/ Havells/Crompton.

Supply and fixing of epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN (VTP) suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting Complete all as specified and directed.

Supply and fixing of epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed

Supply and fixing of MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incoming & outgoing controlling system of capaicty 63 Amps 10 KA breaking capacity etc Complete all as specified and directed. Make Legrand cat part No 408618/20 or equivalent approved by GE

Supply and fixing of MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incoming and outgoing controlling circuit of capacity 6-32 Amp breaking capacity 10 KA etc Complete all as specified and directed. Make -CG C&S ,Havells, Legrand

Supply and fixing of MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incoming and outgoing controlling circuit of capacity 63 Amp breaking capacity 10 KA etc Complete all as specified and directed. Make -CG C&S ,Havells, Legrand

Supply and fixing of MCCB's with fixed thermal and fixed magnetic setting model 125 Amps lcs=100 % lcu 4 pole 16 KA thermal magnetic setting Ics 100% lcu 415 V 50 HZ Make -CG C&S ,Havells, Legrand.

Material and Labour for sub main wiring as in repair with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size non metalic pvc conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the following size complete all as specified & directed.

2x4.0 sqmm + 1x4.0 sqmm earth wire

2x6.0 sqmm + 1x6.0 sqmm earth wire

4x10 sqmm + 1x10 sqmm earth wire

Disconnecting and taking down serviceable exhaust fan any type, size & any capacity with all accessories from existing place with out any damage and refixing the same after oiling, greasing and painting with one coat of synthetic enamelled paint after preperation of surface as per specified and making full serviceable incl replacement of 3 core pvc insulated copper conductor cable from ceiling rose to fan and writing the MES No etc Complete all as specified and directed.

Supply and fix in repair heavy duty exhuast fan 300mm, 900 RPM turbo force model single phase including all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc Complete all as specified and directed.Make -Havells/usha/khaitan.

Disconnecting, taking down ceiling fan from existing place and refixing the same after replacement of rubber bush, canopy,capacitor 2.5 ,mfd, clip including greasing/oiling painting one coat of synthetic elament paint after preparation of surface including replacement of unserviceable suitable size 3 core copper cable from ceiling rose to connector of fan etc and writing the MES No complete all as specified and directed.

Supply and fixing in repairs Air termination single pointed copper rod not less than 12mm dia and 300mm long including fixing arrangements and taking down old one etc Complete all as specified and directed.

Supply and fixing of copper strip of size 20 x 3.15 mm with saddles and fixing screws, etc., for roof conductors and down conductors above ground including taking down old one etcComplete all as specified and directed.

Material and labour for earthing complete with copper earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below gound level with top edge of the earth plate not less than 1.5 m below normal gound level connected to copper earth strip of size 32x3mm by means of bolts, nuts, check nuts and washers of copper and conneted to main control board as directed and including proivison of concrete pit in PCC (1:2:4) type B1, pre cost RCC earth pit cover reinforced with 8 mm dia TMT bars @ 150mmc/c of size 54cmx54cmx8cm with two handle for lifting made out of 8mm dia MS bar, provision of funnel, wire mesh, 20mm bore galavanised steel tubing (med grade) for watering. Charcoal 250 Kg and salt 200 Kg in alternate layers, 40mm bore galavanised steel tubing light grade for protection of earth lead connection including necessary excavation, earth work and necessary testing complete all as shown on electrical plate No 3 of SSR Part-I. Note :- Earth strip and protection pipe upto test point i.e up to 7.5 RM is included in the unit rate of this item Contractor shall quote his rate accordingly.

Refixing the hanging of GI/Copper strip with suitable size nut,bolt washer of same material such as GI/Aluminium/Copper etc Complete all as specified and directed.

Supply and fixing of LED 10 W Recess mounted pressure die cast aluminium luminaire in powder coated white finish in round profile with opimized heat sink for efficient heat dissipation and separate replaceable electronic driver etc Complete all as specified and directed. Make -CG/C&S/Havells/ Legrand.

Supply and fixing of triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amp C series, 10 KA breaking capcity including flush/surface mounting Complete all as specified and directed. Make -CG C&S ,Havells, Legrand.

M/S M B ENTERPRISES

M/S MIR AND CO

M/S Wani and Sons

M/S MUBASHIR SHABIR WANI

M/S maqsood enterprises

M/S Abdul Ahad Rather

M/S FAROOQ AND SONS

M/S M.R. Construction

M/S Thakur & Sons