REPAIRING TO TILING JOINERY SANITARY FITTING PLUMBING AT VARIOUS BLDGS UNDER AGE B R II AT DSSC WELLINGTON

Amount

Demolition of floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises (incl removal of demolition mtrl from site with 5 km radius from site) complete all as specified and directed

M&L for non skid ceramic tiles 6 to 7mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:4 complete all as specified and directed

M&L for coloured glazed ceramic tiles in vertical surface 300 x 600 x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match placed in 10mm thick CM 1:3 complete all as specified and directed

M&L for Light shade coloured Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and scantling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed

M&L for Light shade coloured Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and scantling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:3 complete all as specified and directed

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cement plaster 1:4 all as specified and directed.

Description all as per item No 06 above but in skirting/dado over 15 mm thick screed bed or bedding layer of mortar in cement plaster 1:4 all as specified and directed.

M&L for 25mm thick PCC type B-0 1:2:4, using 12.5mm graded crushed stone aggregate as in flooring to receive tiles etc complete all as specified and directed

M&L for Granite of 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bed in CM 1:4 including polishing, rounding /notching of ends and making hole for gas pipe complete all as specified and directed

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and notching edge of stone slabs, such as in steps, cooking platform and other similar situations and making holes for gas pipe complete all as specified and directed

M&L for Machine cut cudappah stone slab 38 to 40mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and notching to edges of stone slabs, such as in steps, cooking platform, and other similar situations and making holes for gas pipe complete all as specified and directed

S & F in repairs 15mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down or up steel tubing and connections inculding cleaning for refixing complete all as specified and directed

S & F in repairs 20mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors incl taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing complete all as specified and directed

S&F in repairs 5.50mm thick looking mirror of size 600x450mm on 6mm thick (Teak/PVC beading) (Water proof plywood/AC sheet backing) including framing with 1st class hard wood of size 40x40mm decorative type polished complete all as specified and directed

S&F in repairs 15mm dia bib tap with flange complete all as specified Make : Prayag Cat No 7206 or equivalent in Parryware/Hindware) complete all as specified and directed

S&F in repairs 15mm dia bib tap long nose with flange complete all as specified Make : Prayag Cat No 7209 or equivalent in Parryware/Hindware) complete all as specified and directed

S&F in repairs 15mm dia angle cock with flange complete all as specified Make : Prayag Cat No 7210 or equivalent in Parryware/Hindware) complete all as specified and directed

S&F in repairs 15mm dia centre hole basin mixer w/o pop up waste system complete all as specified Make : Prayag Cat No 7250 or equivalent in Parryware/Hindware) complete all as specified and directed

S&F in repairs 15mm dia wall mixer with L bend (Provision for OH shower) complete all as specified Make : Prayag Cat No 7275 or equivalent in Parryware/Hindware)

S&F in repairs 15mm dia wall mixer 3 in 1 (Provision for OH shower & Hand shower) complete all as specified Make : Prayag Cat No 7280 or equivalent in Parryware/Hindware)

S&F in repairs 15mm dia sink mixer with regulat spout (W/M) complete all as specified Make : Prayag Cat No 7255 or equivalent in Parryware/Hindware)

S&F in repairs 15mm dia single flow hand shower with 1.5mtr flexible tube & Hook complete all as specified Make : Prayag Cat No BH-73 or equivalent in Parryware/Hindware)

S&F in repairs 15mm dia 4" overhead shower with 225mm arm & flange complete all as specified Make : Prayag Cat No BS-73 or equivalent in Parryware/Hindware)

S&F in repairs corner glass shelf 300mm (with ABS brackets) complete all as specified Make : Prayag Cat No BEA-46 or equivalent in Parryware/Hindware)

S&F in repairs PVC connection with brass nut 600mm long complete all as specified Make : Prayag Cat No BCT-04 or equivalent in Parryware/Hindware)

S&F in repairs peg set 6 complete all as specified Make : Prayag Cat No BEA-30 or equivalent in Parryware /Hindware)

S&F in repairs Towel rail complete all as specified Make : Prayag Cat No BA-01 or equivalent in Parryware/ Hindware)

S&F in repairs Towel ring complete all as specified Make : Prayag Cat No BA-02 or equivalent in Parryware /Hindware)

S&F in repairs soap dish complete all as specified Make : Prayag Cat No BA-05 or equivalent in Parryware/ Hindware)

S&F in repairs toilet paper holder complete all as specified Make : Prayag Cat No BA-18 or equivalent in Parryware/ Hindware)

S&F in repairs towel rack complete all as specified Make : Prayag Cat No BA-03 or equivalent in Parryware/ Hindware)

S&F in repairs health faucet with 1.5 mtr tube & hook complete all as specified Make : Prayag Cat No BEA-41 or equivalent in Parryware/Hindware)

S&F in repairs corrugated waste pipe 31/32 x 800mm complete all as specified Make : Prayag Cat No 327 or equivalent in Parryware/Hindware)

S&F in repairs stainless steel plate rack (over all size) 31 x 36 x 10 inch Make Prayag Cat No : P-348/ Hindustan complete all as specified

S&F sinks made of stainless steel l.00 mm thick kitchen with sink coupling, plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm all as specified.

Taking down chowkhats or frame n.exc 1.5 Sqm each without taking off shutters from frame, and making good surface as directed by Engr-in-chrage

Taking down chowkhats or frame exc 1.5 Sqm but n exc 4 Sqm each without taking off shutters from frame complete all as specified and directed

Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed

Resecuring or easing and adjusting without taking down shutters of any description n exc 1 sqm complete all as specified and directed

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm but n exc 2 sqm complete all as specified and directed

Taking down and refixing in same opening after resecuring or easing and adjusting shutters of any description n exc 1 sq m complete all as specified and directed

Taking down and refixing in same opening after resecuring or easing and adjusting shutters of any description exc 1 sqm but n exc 2 sqm complete all as specified and directed

S&F for 2nd class hard wood plain solid, straight chowkhats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints. complete all as specified and directed

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for Glazed and skeleton shutter 35mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of me-mbers of shutters as specified in SSR Part I, Section8, clause 8.24 (a) supplied and fitted to chowkats. complete all as specified and directed

S&F for 2nd class hard wood made plain framed panalled door shutter 35 mm thick (any number of panel) with veneered particle board medium density, wood particl board with commercial face venners. complete all as specified and directed

S&F for 2nd class HW glazed and skeleton, shutters,divided into squares to receive glass, gauge etc(with sash bar) with plain chamfered or rounded,mitredand rebated sash bars,any numbers the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) window & ventilaters shutters thickness 30 mm and fitted to chowkat. complete all as specified and directed

S& F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F for Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.

S&F for galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with Tinned Tacks or wire staple as directed by Engineer in Charge.

Description all as per per item No 52 above but fixed in repairs (wooden frames/steel frames)

M&L 4 mm thick Figured glass, pin head, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

S&F MS Butt hinges medium weight cold rolled & fixed 100 mm long complete all as specified and directed

S&F MS Butt hinges medium weight cold rolled & fixed 75 mm long complete all as specified and directed

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 300 mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and directed

M&L for PCC type B-0 (1:2:4) as in filling of steel chowkats or frames complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel door stopper 75mm to 125mm size with rubber as approved by Engr-in-charge

S & F PVC ( SWR) pipes single socketed in any length with rubber ring joints, fixed to walls 75 mm mm dia complete all as specified and as directed

S & F PVC ( SWR) pipes single socketed in any length with rubber ring joints,fixed to walls 110 mm mm dia in repairs complete all as specified and directed

S&F PVC (SWR) bends any radius 110 mm bore. in repairs complete all as specified and directed

S&F PVC (SWR) bends any radius 75 mm bore. in repairs complete all as specified and directed

S&F in repairs stainless steel grating 100mm dia fixed in white cement complete all as specified and directed

S&F in repairs stainless steel grating 100mm dia with hole fixed in white cement complete all as specified and directed

S&F PVC (SWR) floor trap plain with stainless steel grating incl. jointing with solvent cement (100 mm bore)

S&F in repairs, using HDHMR Board Board 18mm thick both side laminated any colour, as in PVC Bedding Shutter vertical support and horizontal shelfs including necessary fittings of screws/MS Brackets in kitchen cupboard and bedroom cupboard in repairs complete all as spd and directed. Make :- HDHMR board : ACTION TESA or techno commercially equivalent

S & F in repairs soft close stainless steel hinges 75mm complete all as specified and as directed . Hardware : EBCO or techno commercially equilavent

S & F in repairs Gunmetal handle 150mm long complete all as spd and as directed. HANDLE : RICH or techno commercially equivalent.

S & F stainless steel telescoping channel for drawer including necessary fiiting upto length upto 600mm complete all as spd and directed.

S & F Stainless steel racks for crockery of kitchen drawer as approved design and stand quality of length 600mm complete as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flange 40 mm .

S&F magnetic catcher for cubboards all as specified and directed by Engr in Charge

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed

S&F fancy type decorative drapray rod 20 mm dia incl side caps and brackets, as in repairs complete all as specified and directed

Hasp and staple (Safety type) aluminium anodised including bolt to hinge plate and fixed with screws, 100mm size, complete all as specified and directed by Engr-in-charge.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken (incl removed demolition mtrl from site with 1 km radius from site)

M&L for APP modified water proofing membrane mineral finish, 3mm thick and weighing not less than 3.6kg/sqm reinforced with non woven ployster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300N/Sqcm side lap & end lap 15cm over coat of bitumen primer " 0.20 KgSqm & applying a coat of blown grade bitumen 90/15 over the memberance " 1.2 Kg/Sqm & finshed all as specified & directed.

Rendering 20mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roof slab/ floor complete all as specified (liquid water proofing compound are measure seperately)

M&L cement Concrete type E2 (1:5:10) using 40mm graded stone aggregate as in sunken floors .

M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate 40mm thick as in flooring with using WPC as per manufacturer's instructions. Note : WPC shall be measured and paid separately.

Supply only liquid water proofing compound all as specified.

Cutting out cracks to V-section in existing roofs / terracing / walls / celing, cleaning out, wetting, grouting with cement and sand slurry 1:3 using water proofing Compound including staging upto 10 mtrs height where ever necessary.

S&F in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete (Excl flush tank) complete all as specified and as directed.

S&F as in repairs Viterous china wash down water closet pan (pedestal pattern) and 'P' or 'S' trap including fixing bolts, PVC bend, seat cover and connecting to PVC (SWR) pipe, complete all as specified (Excl flush tank): Make : Prayag or equivalent in Paryware/Hindware

S&F in repairs wash hand basin oval counter top type of size 520 x 450mm fixed in existing granite of any size complete all as specified and directed.

S&F as in repairs PVC valveless, symphonic action type low level flushing cistern white with inlet, ball valve, float and handle etc complete capacity 10 litres including brackets and upto 1mtr long PVC pipe of 40mm dia and bend complete all as specified and directed.

S & F in repairs seat cover for pedestal pan white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S & F in repairs vitrious china wash basin, white, flat back, size 580 x 450mm (excluding taps, waste , chain and plug and procelain stopper) but including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed

S & F in repairs low density polyethelene pipes (LDPE) of pressure Rating 2 Kgs/Sqcm fixed complete to walls 50mm bore with clamps incl bend and socket complete all as specified and as directed

M&L demolition of floor trap/ Nahani trap, WC 'P' trap or 'S' trap including S&F trap/ Nahani trap,WC 'P' trap or 'S' trap including fixing of tiles to damaged portion as to matching existing floor finish including ,tiles,cement joints, with CM 1:3 and water proofing compound,cement concrete 1:2:4, and fixing SS Grating, cleaning the pipes etc to easy functinal of water floow complete all as specified and directed

Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and as directed

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 without using extra cement complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4)

M&L for preparation of newly plastered surfaces of walls including preparation and applying two coat of distemper oil emulsion washable on new surface over a coat of primer on walls over a coat of wall care putty all as specified and as directed.

Welding, Easing, providing hinges and adjusting without taking down steel shutters of any description complete all as specified and directed

Welding of iron gate of any size including providing pivets, cleats and hold fast etc including taking down of existing gate and refixing complete all as specified and directed

Repair to existing rolling shutters, without ball bearing, spring as specified including top cover, anchoring rod, hasp and staple; erected in position as indicated, complete; push pull or manual type and rewelding, rops, stoppers, oiling, greasing, easying etc including necessary replacement of profile, if required grid channel complete all as specified and as directed.

Dismantling alluminium doors including glass pane/prelam particle board. complete all as specified and directed

S&F anodised aluminium powder coated frame for doors, windows ventilators with one or more rebatesnecessary joining cleats, glazing clips, rubber neoprene packing for fixing etc. complete all as specified and directed

S&F aluminium powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed

S&F 5 mm thick Sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed

S&F 9 mm thick prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium/timber frame work complete all as specified and directed

M&L for factory made UPVC colour sliding Windows with glazing all as per manufacturer's direction and following specifications :- (i) UPVC Window frame shall be made of PVC material confirming to IS 10151, the Window frame shall be made of extruded UPVC section having overall dimension of 112 x 52 having wall thickness 2.5 mm ± 0.2 mm . (ii) Corners of wall frame shall be shall be joined by MS galvanized brackets. Joints shall be mitred and plastic welded. (iii) The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iv) The profiles should be two or three chamber system which shall provide high insulation properties. (v) Glazing shall be provided with 5mm thick Plain / frosted glass fixed with appropriate size beading as per manufacurer's specifications. (vi) Stainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries / Simta Astrix. Note: The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.(II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.

M& L for UPVC ventilator with The profile for costruction of UPVC ventilator frame will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 2 nos on each sicde. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries / Simta Astrix. Note: (i) The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (ii) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.

VVM CONSTRUCTIONS

GMS Builders

ACE PROMOTERS

UNIQUE INDIA CONSTRUCTIONS

Shree Jayam Enterprises

AR Mohamed Yakub and Co