WBPHED/EE/AMD/ NIeT-39 of 2024-2025/13

Amount

Supply and delivery of following materials at site:-

50 Sqmm Flame retardant low smoke PVC insulated(Unsheathed) industrial single core multi strand cable, Nos of wire dia-396/0.40, with electrolytic grade annealed copper conductor suitable upto 1100 Volts gradeconforming to IS:694.(Make-Approved Make)

110 Amp, 3 Pole, AC-3 Duty power contactor, coil voltage 220-240 V, with 2 No+2NC, operating voltage 415 V,50 Hz(Make-Approved Make)

95 Amp, 3 Pole, AC-3 Duty power contactor, coil voltage 220-240 V, with 2 No+2NC, operating voltage 415 V,50 Hz.(Make-Approved Make)

Star-Delta Timer, range from 3 sec to 30 sec, 240 - 415 VAC, 1 C/O (Star)+1 C/O (Delta).(Make-Approved Make)

Electronic over current relay 0.5-6.0 Amp, with Phase loss,Locked rotor protection with coil voltage 240 VAC.(Make-Approved Make)

1.5 Sqmm Flame retardant low smoke PVC insulated(Unsheathed) industrial single core multi strand cable, Nos of wire dia-30/0.25, with electrolytic grade annealed copper conductor suitable upto 1100 Volts gradeconforming to IS:694.(Make-Approved Make)

50-10 mm²-E copper tube terminal heavy duty socket.(Make-Approved Make)

Digital AC Ammeter Input 1A/5A(Programmable), Size-96 mm X 96 mm X 40mm, Display:14 mm LED Display, 3Ph 3W/4W Network, Accuracy Class:-1.0,4 Digit.(Make-Approved Make)

Resin cast C.T., 150A/5A, 5 VA, Class-1.0,(Make-Approved Make)

Digital Voltmeter Input : 100- 500 V L-L (Programmable), Size-96 mm X 96 mm X 40mm, Display:-14 mm LED Display, 3Ph 3W/4W Network,Accuracy Class : 1.0,4 Digit.(Make-Approved Make)

3 Core X 95 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC.(Make-Approved Make)

95-13 mm²-E copper tube terminal heavy duty socket.(Make-Approved Make)

Terminal board making with 2 mm thick CRCA Sheet metal with 2 Nos Star terminal.

H.T. Nuts & Bolts, PVC Sleeves, Board as per requirement.

At first remove the damaged/Non-Functioning VFD from the existing panel after disconnection of all power line.Then fixing the above supplied materials at same place, then making power & control circuit wiring through out the Starter work must be done by Experienced electrician and wholly satisfaction of EIC.

Testing the starter by running the motor with full load as per direction of EIC.

Add GST @ 18%

Add CESS @ 1%

M/s. SOMA ENTERPRISE (BID ID -5961257)

MS S G Enterprise (BID ID -5961213)