WBPHED/EE/BHM/NIeT_34/25-26_1

Construction of RCC or brick manhole chamber of as mentioned below of different types & sizes (Ordinary/ Drop) as & where necessary including supplying, conveyance & delivery, handling, loading & unloading, storing, setting, laying, jointing, curing, wastes etc with RCPC/PFRC manhole cover with frame (ii. 25 MT load bearing capacity round manhole cover provided with two lifter hook), foot step, inlet & outlet pipe. Manhole with RCC construction or brick construction of 250 mm thick 1st class brick work (1:4) in cement mortar, (thickness & height of brick work will vary according to depth of sewer invert) bottom consisting of 200 mm thick cement concrete (1:2:4) with stone chips over a layer of brick flat soling, 150 mm thick RCC (1:1 ½ :3) top Slab with cut out as required with stone chips and M.S reinforcement including necessary shuttering, fixing manhole frame and cover, blind the external and internal surface with 20 mm thick cement mortar(1:3), 1.5 mm thick neat cement finish to the internal surface, cement concrete benching (1:2:4) with stone chips, finish with 1.5 mm thick neat cement punning including excavating earth in all sorts of soil, shoring, bailing /pumping out any type of water or lower down the water table as required upto curing of concrete, ramming & dressing the bed to required level and refilling the side of chamber with excavated earth in layers to original condition and removal of surplus earth / spoils, road materials loading / unloading into trucks within a lead of 3.00 Km and cleaning the site in all respect all complete as per specification, drawings, conditions of contract, additional This item taken from Action Area-IIIB, NTK Project Type-A (1000x1000x1000) Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed.The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom,bailing out water as required complete. Page No 1, Item No 2 of PWD 2017 a) Depth Of Excavation Not exceeding 1.5m

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.

Brick work with 1st class bricks in cement mortar (1:4)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Hire and labour charges for shuttering with centering and without staging and 25 mm to 30 mm thick hard wood planks required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works in foundations.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding150 mm. including watering and ramming etc.layer by layer complete. (Payment to be made on the basis of measurement of finishedquantity of work)

Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S-12592(M.D) (ii) 25 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size : Cover: 680 mm X 90 mm Frame: 800 mm X 165 mm opening: 500mm Weight: 196 kg (approx)

Supply and fittings of Foot Rest made with tmt bars (Rate analysis) Page No 43, Item No 40 of PWD 2017

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Supplying, conveyance & delivery, handling, loading & unloading, storing, setting, laying, jointing etc and testing of HDPE pipes PN-10,PE-100 of IS:4984-2016 of different diameter as mentioned below at levels and slopes as per design and drawing provided by the department for pumping main by HDD process with mechanical devices and machinaries required for trenchless pipe laying in all kind of soil. Cleaning the site in all respect, with plant, labour and materials all complete as per specification, drawing, conditions of contract, additional conditions of contract, other documents and direction of EIC (excluding construction of manhole chambers) (Ref: As per market rate) 160 mm dia HDPE

4m Dia Open Pit as Collection Well Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed.The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom,bailing out water as required complete. a) Depth Of Excavation Not exceeding 1.5m

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.

Hire and labour charges for shuttering with centering and without staging and 25 mm to 30 mm thick hard wood planks required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works in foundations.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

Brick work with 1st class bricks in cement mortar (1:4) In Foundation & Plinth

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

M.S. works in framed gratings of window etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed. In ground floor.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding150 mm. including watering and ramming etc.layer by layer complete. (Payment to be made on the basis of measurement of finishedquantity of work)

Supply and fittings of Foot Rest made with tmt bars

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Construction oh Pump House (Size 3.60 mtr x 3.30 mtr room with 1.2 Mtr. wide verandah) Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding latarite and sand stone) but including removing spreading or stacking the spoils within in a lead of 75m. as directed and including trimming the of trenches, leveling dressing and rammingsides the bottom, bailing out water etc. as required complete. a)Depth of excavation not exceeding 1500 mm

Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powered earth or local sand.

Ordinary Cement concrete (mix 1:2.:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Oridinary cement concrete (3:1.5:1) with graded stone chips (20 mm size) nominal size excluding shuttering and reinforcement , if any in ground floor as per relevant IS Code. (a)Pakur variety

Filling in foundation or plinth by silver in layer not exceeding 15 cm as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand. 1) With Silver sand.

Brick work with 1st class brick in C.M. a) In foundation and plinth (4:1)

b)In superstructure ground floor (6:1)

c)125mm th. Brick work (1:4)

Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. A) With earth obtained from excavation of foundation.

Hire and labour charges for shuttering with centering and necessary staging upto 4 mtr using approved about props and thick hard wood planks of approved thickness with required bracing for concrete slabs , beams,columns,lintels,curved or straight including fitting, fixing & striking out after completion of works(upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineering-in-charge.

25 mm to 30 mm shuttering without staging in foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. , initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. a)For works in foundation basement upto roof of ground floor/upto 4 m . i)Top Steel /Mild Steel [I. SAIL/ TATA/RINL=> Rs.-53241.00/M; II. Other than SAIL/TATA/RINL=> Rs.-51991.00/MT]

25 mm thick Damp roof course with cement concrete with stone chips (3:1.5:1))(with graded stone aggregates 10 mm normal size)and painting the top surface with a coat of bitumen using 1.7 kg per sq m including heating the bitumen and cost and carriage of all materials complete.

Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rouding off corners and including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m. all complete including all materials and labour. In ground floor 3 mm thick topping (high )polishing,grinding on this item is not permitted with ordinary cement). i) 35 mm thick.

Neat cement punning about 1.5mm thick in wall, dado, window, ceiling, floor, drain etc.

Plaster (to wall, floor, ceiling etc) with sand & cement mortar includg rounding off or chamfering corners as directed a ramming out joints or roughening of concrete surface by chamfering etc. including threading noising and drip course where necessary. (Ground Floor) i) With 6:1 cement mortar a) 20 mm thick to inside wall

b) 15 mm thick plaster outside

ii) 10 mm thick cement plaster(4:1)

Supplying fitting, fiing Openable steel windows as per sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators. (The extra rate admissible for the openable portion only)

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S/M.I.gate etc. with point welding at not more than 150 mm apart complete in all respect as per design including cost of all labour and materials.

M.S. or W.I. ornamental grill of approved design,joints continuously welded with M.S. WI flats and bats for winding,drilling etc.fitted & fixed with necessary screw and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Rs.- 8247.00/Qt, (ii) Grill weighing above 16 Kg./sq.mtr and above Rs.-8053.00/Qt.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (Plastered or concrete surface) as per manufacture's specification in ground floor. A) Two coats (on new cement plaster surface)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer). a) 2 coats. Standard quality.

b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of a approved putty etc on the surface if necessary b) On steel or other metal surface (with other than hi gloss of approved quality). i) 2 coats (with any shade except white) (Hi gloss)

Number Plaque of buildings (Plaque size upto 225 mm x 225mm ) made of cement plaster(2:1)on face of wall or plinth , with 50 mm size letters P.H.E. and the number of the structure formed thereon (in sunk type)including painting the letters complete as per direction.

Supplying,fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg/sq.cm. (for water lines only).- 15 mm.

Constraction of Septic Tank of different capacities as per approved drawing with 1st class brick work in cemnt mortar (4:1) including 560 mm dia RCC manhole cover (Heavy type) of approved make supplied, fitted and fixed in the 100 mm thick RCC (3:1.5:1) top slab with necessary fittings, 20 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below GL floor finished with 25 mm thick grey artificial stone over 100 mm thick RCC (3:1.5:1) bottom slab including supplying, fitting and fixing all necessary specials fittings, SW tees CI foot rest etc including excavating earth in all sorts of soil, shoring , bailing out and pumping out water as necessary, ramming dressing the bed and refilling the sides of the tank with earth ,removing spoils , filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc with internal plaster work and artifical stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement, complete in all respect as per direction of Engineer In Charge. with pakur variety (SAIL/TATA/RINL) i)for 10 users with 250 mm thick brick work (6:1) (internal size 2000 mm x 900 mm x 1300 mm heiht including free board of 450 mm)

Supplying, fitting & fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make supplied ,fitted fixed in position complete excludingp or s trap.(excluding cost of concrete for fitting) i) 530mm x 410 mm

supplying fitting and fixing 10 litre PVC low-down cistern of conforming to I.S. specification with PVC fitting complete C.I. make with either side or bottom brackets including two coats of painting to brackets.

Supplying PVC water storage tank of approved quality with closed lid (Black)-Multilayer. A) 500 litre capacity.

Construction of circular soak well 2.5 mtrs deep in all types of sandy soils with dry brick work upto 1.6 mtrs from the bottom having 150 mm intermediate cement brick work (4:1) band all round and cement brick work (4:1) upto 0.90mtrs from top with 20 mm thick cement plastering (4:1) to inside face upto the depth of cement brick work, 15 mm thick cement plaster (4:1) on outer face from top of the well upto GL and 6 mm thick cement plaster (4:1) on top of the RCC cover slab including filling bottom 1.00 mtr of inside of the well with jhama metal (50 mm to 63 mm size) including RCC cover slab of 100 mm thickness with cement concrete (3:1.5:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia RCC manhole cover (heavy type) of approved make supplied ,fitted and fixed in the cover slab with necessary fittings , making necessary arrangements for pipe connections ,excavation of well including shoring dewatering and removing the excess earth form the premises as per direction complete in all respect with all costs of labour and materials. (SAIL/TATA/RINL)

Drilling and tapping C.I. main.- upto 15 mm.

Supplying, fitting & fixing Fan Hook for ceiling with 1 metre long 16mm dia rod complete including mending damages payment for damage and repair to be made separately.

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint..

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. (a) 32mm. thick.

Constructing inspection pit of inside measurement 600 mm x 600 mm x upto 600 mm (depth)with 250 mm thick 1st class brick work in cement mortar (1:4)on all sides ,bottom of the pit consisting of 100 mm thick cement concrete(1:3:6)with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4)cement plaster to inside walls and outside walls upto GL and 20 mm thick (1:4)plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6)with stone chips as per direction,neat cement finishing to entire internal surfaces,top of the pit covered with 100 mm thick RCC slab (1:1.5:3)with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster(1:4) in all external surfaces of the slab and one 560 mm dia RCC manhole cover of approved make supplied,fitted and fixed in the slab with necessary fittings,necessary earth work in excavation in all sorts of soil,filling sides of the pit with earth and removing spoils after work complete in all respects with all costs of labour and materials. -with pakur variety. (Sail/TATA)

Supplying , of UPVC pipes (B Type) fitting conforming to IS 13592-1992 (A) i) Single socketed 3 Mtr Length. B) 110 mm

B) Fittings xxi) 110 X 110 P Trap

Supplying, fitting, and fixing PVC pipes of approved make of Schedule -80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (part —I) with all necessary accessories, specials viz, socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder, bats claims, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (A) For Exposed Work a)15 mm dia medium quality

b)20 mm dia medium quality

b)25 mm dia medium quality

Supplying,fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq.cm. - 15 mm.dia.

Supplying, fitting and fixing approved patent vent cowl I.C.I. conforming to I.S.S. and painting two coats to the exposed surface with paint complete. a) 75 mm dia.

Supplying,fitting and fixing pillar cock of approved make. A)i)CP Pillar Cock-15 mm (equivalent to code no-507 & Model - Tropical/sumthing special of ESSCO or similar brand).

Extra rate for using water proffing and plasticing admixture @ 0.2% by weight of cement(or at manufacturer's specifiied rate)(for concrete of various grade.

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Making rubber gasket joint to CI/DI pipes maintaining proper alignment level etc. by mechanical arrangement with or without using mobile cranes where necessary and with help of all other equipments tools and tackles etc. as required providing lubricants of approved quality and direction of EIC. (rubber gasket will be supplied deptt. free of cost)

"Carrying CI/DI pipes with specials and valves and lowering placing in position and laying carefully inside the trenches in proper alignment and gradient etc.including earth work inexcavation of adequate width as per specification having min. clear cover from top of pipe is 1.10mtr. below existing ground level in any kind of soil including mixed with boulder, road sub-grade and its flank,but excluding moorum and laterite and stone etc.without damaging the exisiting telephone/electric cableetc.(incaseof damaged if any type of cable line during excecution , necessary damaged charges as applicable by the respective authority will beborne by the agency in his own cost) preparing the bottom surface for continuous bedding of pipe line and laying pipes, fitting, fixing specials and valves with bailing out water if any including carriage of pipes, specials and valves from local deptt.store within 8KM and back filling the trenches with excavated earth in layers to original condition as per specification and direction of EIC. The surplus materials after execution of work are to be return to the deptt. store. N.B: i) Any deviation from required clear cover of 1.10mtr., due to site adverse condition, prior permission is to be obtained from the EIC in exceptional situation and payment will be made on prorate basis over the rate of entire item ii) No payment will be made without hydraulic test of the pipe line either part or full iii)Thepipes, specials and valves , rubber gasket will be supplied deptt. free of cost.

Supplying 100 mm Dia DI-K-9 pipe

Add GST @18% on sum of Item No. 1 to 78

Add Cess @1% on sum of Item No. 1 to 79