REPAIR TO SANITARY FITTING SUNKEN TREATMENT WALL FLOOR TILE JOINERY BRICK WORK FLOORING PLASTERING HARD STANDING REPAIR PLUMBING SANITARY FITTINGS TO OTM MD ACCN AND PERIODICAL SERVICES TO OVER HEAD RESERVOIR MES INSTALLATIONS AT RTS AND DEPOT HEMPUR

Amount

Taking down shutters only of any description area n'exc 1.00 sqm complete all as specified and directed.

Taking down shutters only of any description, area exc. 1.00 sqm but n,exc. 2.00 sqm, each, complete all as specified and directed.

Refixing of shutters only of any description area n'exc 1.00 sqm at same opening complete all as specified and directed.

Refixing of shutters only of any description area exc. 1.00 sqm but n,exc. 2.00 sqm, each at same opening complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n'exc 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area exceeding 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed.

Refixing of chowkhat frame area n'exc 1.50 sqm at same opening complete all as specified and directed.

Refixing of chowkhat frame area exceeding 1.5 sqm but n.exc 4.00 sqm , each at same opening complete all as specified and directed.

S & F 35mm thick IInd class hard wood glazed or skeleton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glass etc,. Sizes of member of shutters as specified in SSR Part-I,1991, section 8, clause 8.20(a),complete all as specified and directed.

S & F 35mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S & F 35mm IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.

S & F solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, suppling and fixing in opening as per specification and drawing complete all as specified and directed.

S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification and drwing complete all as peccified

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n' exc. 0.5 sqm in each pane complete all as specified and directed.

S & F 3mm thick figured glass pine head type and glazing with oil putty in square n' exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality and description) from wooden frames/steel frames, glazed with putty or fixed with beads and Supply and fixed, 3mm sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required.

S&F Framed work as in doors , gates & Stairs of angle or other section with gusset plates, rails, braces, etc., complete,drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing conforming to FE 290 Gde E-165 complete all as spd as directed

S&Fsecond class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed.

M & L for IInd class hard wood fillets square, rectangular or triangular in section, chamfered on edges & face and bullnosed for sectional area n' exc 3 Sqcm complete all as specified and directed.

S & F Mild steel work as in holdfast and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed.

S & F 100 mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed.

Supply and fix 100mm long butt hinges medium weight cold rolled mild steel all as specified and directed.

Supply and fix 75 mm long butt hinges medium weight cold rolled mild steel all as specified and directed.

S & F 150mm long mild steel pressed handle oval type stove enamelled black all as specified and directed.

S & F 100mm long mild steel pressed handle oval type stove enamelled black all as specified and directed.

S & F for 200mm long berrel tower bolt aluminium anodised with staples and bolt of extruded section complete all as spd. & directed.

S & F for 100mm long butt hinges extruded aluminium anodised complete all as specified and directed.

S & F 150mm long extruded aluminium anodised handle all as specified

S & F 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed.

S & F in repair 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed.

M & L 300mm long mild steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.

M & L preparation of newly wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engineer-in-Charge.

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

Ditto all as per Item no 39 but half brick in CM(1:4) all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed and specified

M & L glazed ceremic colour tile in vertical surface of size 300x200x7mm thick as in dado/skirting etc set and jointed in neat cement slury and pointed in white cement with colour pigments to match complete all as specified and directed.

M & L Non skid ceremic colour tile 7.00 to 8.00 mm thick (square/rectungular) area exc. 0.11 Sqm and n'exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

All as above item No 43 but on vertical surface all as specified and directed.

M & L Vitrified ceremic tile light shade tiles 8 mm thick (squire/rectangular) polished area of each tiles n' exc 0.36 sqm in floors etc set and jointing in neat cement slullry and pointed in white or coloured cement to match complete all as spd and directed

All as per above item No 45 but on vertical surface all as specified and directed.

M & L 15mm thick screed bed in cm (1:4) over 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm grade crushed stone aggregate) . As in under layer of fioor finish all as specified and directed.

M & L for 15 mm thick scred bed or bedding layer of mortar in 1:6 for laying of flooring complete all as specified and directed.

M & L 10mm thick rendering on fair faces of brick or concrete surfaces in 1:4 CM finished even and smooth without using extra cement complete all as specified and directed.

M & L Non skid ceremic colour tile 7.00 to 8.00 mm thick (square/rectungular) area exc. 0.06 Sqm and n'exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site of 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, size of pipe 20mm bore complete all as specified and directed.

S & F steel water tubing of 15mm bore of tube medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 'medium grade' galvanized with and including all GI fittings and fixed complete to walls and ceiling or laid in floors 20mm dia complete all as specified and directed.

Refixing old retrieved steel water tubing and connections in new or old position (Walls, ceiling, floors, etc.) 15mm bore complete all as specified and directed.

Refixing old retrieved steel water tubing and connections in new or old position (Walls, ceiling, floors, etc.) 20mm bore complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repair 15 mm bore bib tap standard of PTMT any colour screwed down high pressure with crutch or capastan head screwed both ends for iron 15 mm bore pipe or for unions ( Minimum weight 120 Gms) complete all as specified and directed.

S & F in repair 15 mm bore stop valves of PTMT screwed down high pressure, with crutch or capastan head screwed both ends ( minimum weight 110 Gms) complete all as specified and directed.

S & F in repair 15 mm bore concealed stop valves long shank cost copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends complete all as specified and directed.

S & F and repair 15 mm bore fancy type bib tap chromium plated screwed down high pressure with crutch or capastan handle screwed both ends for iron 15 mm bore pipe or for unions complete all as specified and directed.

S & F in repair 15 mm bore stop valves cost copper allow chromium plated fancy type screwed down high pressure, with crutch or capastan handle screwed both ends complete all as specified and directed.

S & F and repair 15 mm bore pillar cock fancy type cast copper alloy with capastan head,chromium plated, screw down, high pressure, screwed for iron pipe of 15 mm bore with all complete all as specified and directed.

S & F and repairs fo brassChromium plated shower rose 125mm size with or witout swivel joints including fixing to GI pipe complete all as specified and directed.

S & F for 20 mm dia Harrision curtain rails mild steel chromium plated including with fixing brackets stop rollers etc. complete all as specified and directed.

S&F PVC 10 ltr capacity symphonic action type, low level, flushing cistern, white, with inlet, ball valve, float and handle including MS suitable size bracket complete all as specified and directed.

S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm , white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

S & F vitreous China wash hand basin, of size 550 x 400mm including brackets, flat back with waste pipe and CI grating including all connections, fixed in repair, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

S & F PVC waste pipe of 32 mm dia PVC socket for WHB/Kitchen sink complete

S & F for 100 mm dia of grating doom of PTMT (minimum weight 25 gms) complete all as specified and as directed.

Dismantling PVC/RCC water storage tanks and removing from site exc 250 ltr but n.exc 500 Ltrs capacity complete all as specified and directed.

S&F rotational moulded polytheylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with polythene float and fly nut screwed for iron pipe of 20mm dia or for union as specified complete ll as specified and directed.

M&L for GI steel sheet cover / lid 0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 ltrs to 1000 Ltrs capacity with proper fixing arrangement of hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe.complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe all as specified and directed.

S&F in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 20mm bore all as specified and directed.

S&F in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 15mm bore all as specified and directed.

Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:4 in two coats (10mm+5mm), second coat mixed with water proofing compound on brick work or concrete surface finished fair and even complete all as specified and as directed. Note :WPC will be measured & paid separately)

M&L 10mm thick rendering in CM 1:6 on brick work or concrete surface finished even and smooth complete all as specified and as directed.

M&L 5mm thick rendering in CM (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M&L Three coat of white wash on new plaster surface after necessary preparation of surface complete all as specified and as directed.

M&L Three coat of white wash as in new plaster surface/concrete surface as on ceiling after necessary preparation of surface complete all as specified and as directed.

M&L two coats of cement base paint on new plastered surface after necessry preparation of surface complete all as specified & as directed.

Supply only integral water proofing compound all as specified and directed.

Dismantling of PVC pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

Taking out unserviceable Nahani trap / floor trap and M&L for 75 mm dia Nahani trap / floor trap with CI grating with lead joints, complete all as specified and directed. ( ISI marked and conforming to relavent IS)

M & L for chequered cement tiles 20 cm X 20 cm X 25 MM thick, set, jointed & pointed in neat cement slurry in floor with grey cement mixed with colour pigments including packing to the edges with cement concrete 1:2:4 to required gradient complete all as specified and directed

M & L machine pressed precast cement concrete cloloured Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with sand cushioing and pointed with grey/coloured cement including packing to the edges with concrete 1:2:4 to required gradient complete all as specified and directed.

M&L P C C 1 : 2 : 4 type B1 (using 20 mm graded crushed stone aggrgates) as in 25 mm thick flooring with using and mixed with and including metallic floor hardner @ 4% by weight of cement even and fair laid in panels finished with spike rolling complete all as specified and directed.

M & L forming 12 mm thick expansion joint filled with bitminious filler with sealing compound Grade A complete all as specified and directed.

M & L in repair machine cut Kota stone 20 to 25 mm thick laid over cement screed base (including screed bed 15mm thick in CM(1:6), laid and jointed with grey cement slurry mixed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete up to deserid finish as directed. complete all as specified and directed.

M&L Kota stone slab 20 to 25 mm thick in riser of steps,skirting, dado laid over cement screed bed (including screed bed 15mm thick in CM (1:6) jointed all as specified and directed.

S&F in repairs Plain Aluminium sheet 0.56mm thick fixed with nails at bottom , back and front side of wooden doors etc complete all as specified and directed.

M&L for 32/50mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern as in roof covering etc all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated etc) sheet in roof covering

S & F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L & J type hook bolts and washers in roof, waals etc with grade of zinc coating 275 complete all as specified and directed.

M & L for 6mm thick AC sheet corrugated or semi corrugated sheet in roof covering fixed with J and L hook complete all as specified and directed.

M & L for 6mm thick AC two pieces adjustable plain wing ridge fixed with coach screw complete all as specified and directed.

Demolition of cement concrete in ground floor paving n. exc. 15 cm thick below or above GL complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm wide complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engineer-in-charge.

S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee,Elbow, Socket) complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as specified and directed.

Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slab suported on walls and column in floor, roof landing, balconies,canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1(using 20mm graded stone aggregate) as in Fins, Fecias, louvers, parapet, railings and artificiar work exc 60 cm in height, newels, balustrade and the like complete all as specified and directed.

M & L formwork to soffits of suspanded slab such as roof slab, floor slab landing and similar work n' exc. 200 mm thick including fair finished complete all as spd and directed

M & L mild steel TMT bars,10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to Grade-I IS-432 (Part -I), complete all as specified and directed.

Ditto all mas per item no 115 above but 5 mm dia and overupto and including 10 mm dia in striupps all as specified and directed.

M & L for roof treatment/sunken treatment with Polymeric membrance (APP based) with non woven Polyster mat as reinforcement with following:- (a) M & L for surface preparation by removal of existing treatment of tar felt treatment/PCC/plaster/tilling/loose particle to ensure or clean. Smooth and dry surface and preparing surface. (b) M & L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.300 Ltr/Sqm on dry and clean surfaces. (c) M&L for providing & laying APP based polymeric membrance of n'less than 3mm thickness of weight of n'less than 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surfaces by torch application with side over laps & joints over laps etc apper manufactures instr. (d) M & L for finishing of top surfaces by two coat of aluminium paint over and including a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufactures instruction. (e) M & L for providing test with filling of water for continuous 48 hours all as specified and directed. (f) M & L for providing template of size 450x450mm to each bldg where roof treatment is carried out with making CA No date of roof treatment etc all as specified and directed.

M & L 20 mm thick rendering wall in CM (1:4) on brick & concrete surfaces using without extra cement complete all as specified.

M&L for preparation of old plastered or un plastered surface of concrete , walls, of RCC Over Head Reservoir (Max height 24 mtr) capacity 25000.00 Glns) cornices etc by brooming down or steel wire brushing scrapping down smoke soot , moulds moss and efflorescent salts and trading oil and greasy spots including all necessary scaffolding and applying two coat of two coats of Dust Resistant and Anti Algal weather proof exterior emulsion paints over a coat of primer . complete all as specified and directed.

All as per above item No 119 but 10,000 gallon capacity complete all as specified and directed.

Removal of complete beehive of RCC Over Head Reservoir (Max height 24 mtr) including all necessary scaffolding complete all as specified and directed.

Removal of vegitation growth trees (any dia) complete with complete roots including application anti grroth chemical from RCC roof slab rain/ sewage water pipe complete including of brick / concrete masonry if required , scaffolding at any height and making good with and including materials as demolished , including matching with existing surface complete all as specified and directed.

Supply and fixing of LED Floodlight luminaire with secondary optics 160 Watt, 220V 50Hz made in pressure die cast housing and heat sink in aluminium extrusion with IP66 protection along with mounting bracket fixing to pole including necessary arrangment of cable and removing the old defective light fitting complete ,all as specified and directed by Engr-in-Charge. (Make: Bajaj Cat No BARFEG 160W LED or equivalent in Wipro / Philips as approved by GE)

Supply and fixing of LED street light 72 Watt, 220V 50Hz with pressure die cast housing with toughened glass and individual LEDs with secondary optics with IP66 protection and provision of bracket for fixing of street light fittings bend to shape, made out of bracket suitable size GI pipe light grade upto 1.50m long fixed including MS clamps of size 40 x 4 mm, bolt, nuts & washer to fix with LT pole/Wall with two coats of aluminium paint over a coat of red oxide primer including taking down existing unserviceable LED street light fittings complete all as specified and as directed by Engr-in-Charge . (Make: Bajaj Cat No. BRTFG LED V3 or equivalent in Havells/Philips/wipro as approved by GE)

M&L outdoor type street light junction boxes with PVC water tight encloser, ready made type, with provision of suitable aluminium bus bars for three phases and one neutral mounted on insulators and bus bar having provision of 6 A SP MCB terminal connection and inter connection of street light/garden light from pole to pole and pole to light fittings including necessary PVC insulated and PVC round sheathed, copper conductor flexible cable 1100 volt, conforming to IS-694 of size 3 core 2.5 Sqmm alongwith 15 mm GI pipe light grade with help of passing the cable from juction box to street light with clamps, nut and bolts as reqd etc, complete all as specified and as directed by Engr-in-Charge.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/path/drains/along wall/floor/equipment etc. cross sectional area 2 core 16 Sqmm including necessary cable lugs, complete all as specified and directed by Engr-in-Charge..

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, laying of pipe etc and not exceeding 10 sqm on plan for manhole etc and getting out in soft/loose soil, complete all as specified and directed by Engr-in-Charge.

Returning , filling in , with approved excavated soil including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge. .

Removing excavated material (soils) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Supply and laying dry burnt bricks, sub class ‘B’ old size in cable trenches, as cable protection complete all as specified and directed by Engr-in-Charge.

M & L dry sand cushioning to under ground electric cable on layer of 08 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of M.E.S Schedule Part-I complete all as specified and directed by Engr-in-Charge.

Supply and laying galvanised iron pipe 40mm bore light grade fixed to poles with steel clamps laid under road crossing, fixed to wall etc complete all as specified and directed by Engr-in-charge. Make : Jindal/TATA/Prakash

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping to poles including necessary form work and applying three coats of white wash over the surfaces of coping including demolition of existing disturbed coping and removing the debris to a distance n.exc. 50m complete all as specified and as directed by the Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with GI earthstrip 32x6 mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked) of 40 mm bore for protection of earthstrip of 32x6 mm including PCC with 1:2:4 type B1 using 20mm graded crushed stone aggregate CI frame and cover of angle iron 40x40x6mm and handle 6mm dia MS bar made to shape GI light grade20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, charcoal and common salt filling, test point made out of Bronze/Gun metal with fixing arrangment , funnel, wire mesh and earth work in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Metres , all as per electrical plate No3 of SSR 2009 Pt -I to earth test point all as specified or indicated including testing on completion. (NOTE :- The quoted rate of earthing shall be deemed to included cost of 7.5 m long galvanised wire 32x6 mm dia and protection pipe of 40 mm bore medium grade(ISI marked) any veriation in length shall be adjusted through deviation order based on SSR rates adjusted with quoted rates).

M&L for earth continuity of GI earth strip of size 32x6 mm laid in trenches/ fixed to walls with saddles and fixing screws etc. from earth pit to test point all as specified and directed by Engr-in-Chare.

Material and labour for Air termination, single pointed aluminium rod 12mm dia and 300mm long and taking down the unserviceable / broken one and remove from site complete all as specified and directed.

Material and labour for test point terminal block made of gun metal or phosphorus bronze of size 75 x 25 x 10 mm drilled and screwed including 3 Nos. 8 mm dia, 25 mm long hexa headed screwed including taking down unserviceable one and remove from site complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and all accessories concealed and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including modular metal flush box concealed in walls, with modular white cover plate with frame top cover for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for the following: - One light point controlled by one switch.

Ditto all as per item no 138 above but One fan point controlled by one switch and one regulator.

Ditto all as per item no 138 above but One 3 pin switch socket outlet point 5 Amps on same board.

Ditto all as per item no 138 above but One 3 pin switch socket outlet point 5 Amps on independent board

Ditto all as per item no 138 above but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

Supply and fix switch modular type single pole one way 6 amp.

Supply and fix switch modular type single pole one way 16 amp.

Supply and fix modular socket outlet 3 pin (multi pin) 5 amp all as directed

Supply and fix modular switch socket outlet multipurpose, 3 pin 15 and 5 amp controlled by one switch

Supply and fix fan speed regulator, modular type (Step type), suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed.

M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

S&F ceiling rose PVC / polycorbonate isolated body 3 terminals with base plate ISI marked all as specified and directed..

Supply and fixing compact industrial/housing batten suitable for single T8 LED tube alongwith separately LED Retro fit Rod 20 Watt with extruded aluminium/pc body and PC diffuser and inbuilt driver including taking down of existing FTL fitting [Cat No. DIJB12LT8-20 and LTT8-20 of make: CG or equivalent in Havells/ Philips/Bajaj]

Supply and fixing of LED building security light fitting Luminare of 25 Watt made up pressure die cast housing with toughened glass and high power with option of secondary optic with IP 65 protection complete with 1.5 meter GI tube and fixing clamps and 3 core copper cable complete all as specified and directed .Cat no. LSTS-25-CDL-M of crompton or equivalent in Philips/Bajaj as approved by GE.

S&F MCB DB SPN 4 way 240V with 200 amps rated bus bar double door all as specified and directed

S&F MCB DB SPN 8 way 240V with 200 amps rated bus bar double door all as specified and directed

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 20 to 40 Amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge. (Make : Legrand , schneider Electric as approved by GE)

Supply & fixing MCB Single Pole (SP) of capacity 6 to 32 amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge. (Make : Legrand , schneider Electric or equivalent as approved by GE)

Earthing complete with galvanised steel earth plate electrode 60cmx60cm.x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point, 20 mm bore medium grade GI watering pipe, 15mm bore light grade GI protection pipe, PCC chamber with RCC cover, funnel with wire mesh etc including necessary test on completion all as specified and as directed. Note :- (a) Earth strip / Earth lead beyond 7.5m shall be measured and paid separately. (b) Cost of 15mm and 20mm bore GI pipe is deemed to be included in quoted rates. ( NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)

M/s Naresh Kalia

Bajetha Construction

raman enterprises