Providing Paver block arrangements and Electrical works to Ansari nagar UPHC at Singarapuram main road Near Cental MLA Office in ward 59

Amount

Dismantling the existing Plain cement concrete

Supplying and laying Rubberised interlocking Paver block M40 grade 80mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Painting two coats with Oil bound Distember over one coat of wall primer

Wiring with 2x2.50 sq.mm PVC unheated SC Aluminium cable of 650 V grade in suitable PVC rigid pipes in wall or ceiling with PVC accessories with TW switch box in flush with wall covered by hylum sheet3mm thick and painting with suitable colour of 14 SWG TC wire for light point.

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set

Supply and Fixing of 20W 4feet LED fitting with LED light (Higherend)

PVC INSULATED SINGLE CORE MULTI STRAND FIRE RETARDANT FLEXIBLE COPPER CABLE WITH ISI MARK CONFORMING TO IS (2.5 Sq.mm)

PVC INSULATED SINGLE CORE MULTI STRAND FIRE RETARDANT FLEXIBLE COPPER CABLE WITH ISI MARK CONFORMING TO IS (1.5 Sq.mm)

Supply and Fixing of 16A 5pin socket (Higherend)

Supply of PVC rigid pipes for Electrical wiring works

Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in three track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading. Aluminium clips, rubber beading, handle and fixing 4mm thick clear sheet glass including all required for fabrication etc.,complete. Necessary dismantling making holes in RCCcolumns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers. The Al. Surface sis to be anodised with matt finish under electrically condition in accordance with ISI 1868/ 1962 specification for an averageanodicfilmthickofnotlessthan15microns

Supplying & Fixing of PVC Door etc., complete

Add GST 18%

NAGALINGAM PITCHAIMANI