REPAIRS MAINTENANCE OF UNSV CEILING FAN/ EXHAUST FANS, / GEYSER 25/50 LITRES SUBMAIN WIRING AND CERTAIN ALLIED WORKS AT AF STN UDHAMPUR

Amount

Taking down carefully aluminum/copper point wiring (light/ fan/socket or power) complete with fittings such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCBs, Main switches from control board and making good disturbed surfaces of walls, floor to match with existing specifications complete all as specified.

Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through existing conduits, with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Description all as per serial item No.2 here-in-before but for one 6 Amps socket outlet on the Independent board

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through existing conduits with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Socket shuttered outlet 2/3 pin, 6 Amp, modular type, 2 modules complete all as specified and as directed.

Switch modular type, 16/20 Amp, one way, one module conforming to IS-3854 complete all as specified and as directed.

Switch modular type 6 AMP,one way , one module conforming to IS-3854 omplete all as speciifed and as directed

Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed.

Supply and fixing of steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. As requied including taking down complete all as specified and as directed.

Supply and fixing of 15 Amps switch socket combination including taking down complete all as specifed and as directd

Modular electronic fan regulator 2 modules rotary step type 230 volts complete all as specified and as directed.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid concealed conduit, heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire, drawn through Heavey duty PVC conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together shall be considered as 1 running metre for payment purpose.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire, drawn through Heavey duty PVC casing caping and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together shall be considered as 1 running metre for payment purpose.

All as per Sl item No 12 but of size 6.00 sqmm (nominal area) and of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire. Note: Two runs each of 6.00 sqmm main cable and one RM of 6.00 sqmm cable as earth wire together shall be considered as 1 running metre for payment purpose.

All as per Sl item No 12 but of size 10.00 sqmm (nominal area) and of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire. Note: Two runs each of 10.00 sqmm main cable and one RM of 10.00 sqmm cable as earth wire together shall be considered as 1 running metre for payment purpose.

Sheet metal enclosures for DBs SPN 2 way (when MCBs to be used) flush mounted including taking down existing unserviceable DBs /board /box including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian

Sheet metal enclosures for DBs SPN 8 way with 200Amps rated busbar (when MCBs to be used) flush mounted including taking down existing unserviceable DBs /board /box including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian

MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein & disposing from site complete all as specified and as directed. Make:CAT PART NO:408618 of Legrand or equavalent to HAVELLS / SIEMENS/indoasian

MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein & disposing from site complete all as specified and as directed. Make:CAT PART NO:408618 of Legrand or equavalent to HAVELLS / SIEMENS/indoasian

M&L in repair of MCB TPN 40-63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein & disposing from site complete all as specified and as directed.CATPARTNO 811200.(Make: Indoasian or its equivalent/legrand /CG )

Supply and fixing 03mm thick hylen sheet (white colour) suitable for ceiling fan/wall plug etc all as specified and as directed.

S&F in repairs Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 36 watt (cool white), minimum system lumen efficacy not less than 80 % , CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, Surge Protection>2 KV, IP protection IP 20, powder coated housing with ashthetic bottom frame, with excellent heat dissipation through high thermal conductivity, high efficiency transulence diffuser, suitable for any type of ceiling system including connection with PVC insulated copper conductor 3 core cable of 0.50 sqmm complete including taking down all as specified. (Make Havells/Bajaj/CG or Equivalent.)

.Supply and fixing of modular for electrical fan round sheet plastic PVC fan sheet cover Wall plug size 160 mm complete all as specifeid and directed.

Taking out burnt/damaged copper winding wire from 1200/1400mm Sweep ceiling fan motor of any make and M&L for rewinding of ceiling fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, including painting, capacitor, ball bearing, bush,locking pin and certain minor repair etc assembling and testing complete all as specified.

Taking out burnt/damaged copper winding from Wall mounted fan 400 to 600mm motor of any make and M&L for rewinding of wall mounted fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, including painting capacitor ball bearing bush,locking pin and certain minor repair etc. each assembling and testing complete all as specified

Taking out taking down refixing burnt/damaged wire from pedistal fan any size motor of any make and M&L for rewinding of fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, assembling and testing including taking down and refixing of same places complete all as specified of the following sweep:-

Taking out burnt/damaged wire from exhaust fan 200 to300 mm motor of any make and M&L for rewinding of fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, assembling and testing including taking down and refixing using etc of same places complete all as specified.

Taking out burnt/damaged wire from exhaust fan motor of 400 to 450 and M&L for rewinding of with super enameled copper winding wire of same size, gauge & weight including packing insulating material, soldering, varnishing, including painting capacitor ball bearing bush and certain minor repair etc assembling and testing including taking down & refixing using fastner etc. complete all as specifiedvarnishing & insulating complete all as specified and directed.

Taking down dismaintilling UNSV/Rusted fatal/damaged Exhaust Fan MS / iron body of any size and any make and repairing the following items of existing sizes.

Exhaust Fan motor suitable for 400 to 450 mm

Exhaust fan frame with nut bolts etc size 400to 450 mm sweep

Exhaust fan Louver iron shutter for size 400 to 450mm sweep along with fixing arrangement

Exhaust Fan motor suitable for 250 to 300 mm

Exhaust fan frame with nut bolts etc size 200to 300 mm sweep

Exhaust fan Louver iron shutter for size 250 to 300mm sweep along with fixing arrangement

Taking down dismaintilling UNSV/Rusted fatal/damaged Ceiling Fan from of any size and any make and repairing the following items of existing sizes.

Ceiling Fan motor suitable for 1200 mm

Ceiling fan winds(sweep)1200mm set etc size

Ceiling fan conopy set of two suitable for existing fan.

Ceiling fan down rod suitable 1200mm ceiling fan.

Ceiling fan fixing arrangement/hook with nuts bolts /locking pin system

Standard ball bearing for 1200/1400 mm ceiling fan suitable for diffrent makes of fans of aproved quality including necessary

S&F in repairs down rod 30 cms long made out of heavy grade M.S pipe with necessary threading at both ends, holes as required matching with existing & painting for size of ceiling fan 1200mm/1400 mm as all directed by Engineer-in-Charge. Make :- Orient/Usha/Khaitan or as directed by GE.

S&F in repairs down rod 60 cms long made out of heavy grade M.S pipe with necessary threading at both ends, holes as required matching with existing & painting for size of ceiling fan 1200mm/1400 mm as all directed by Engineer-in-Charge. Make :- Orient/Usha/Khaitan or as directed by GE.

S&F in repairs rubber bushes and real synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans all directed by Engineer-in-Charge.

S&F of nuts, bolts & washers,nails with clamp, clips with complete set of appropriate any type of as per existing size for hanging of any type fan ,geyser etc all directed by Engineer-in-Charge.

S&F in replacement fasteners size of nut less than25 mm clamp with complete set of appropriate size for hanging of ceiling fan all directed by Engineer-in-Charge.

Supply and fixing of Surface mounting clamps for PVC pipe clearince saddle clamps25/40/50 /60/75 mm complete all as specified and as directed.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 2.5 mfd ISI mark including necessary connection complete all as specified.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 3.15 mfd ISI mark including necessary connection complete all as specified.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fan of capacity 4 mfd ISI mark including necessary connection complete all as specified.

S&F in replacement for providing three core 23/.0076 with copper conductor ceiling fan to ceiling rose and making connection complete all as specified and directed by Engineer-in-Charge.

Painting one coat of synthetic enameled paint by spraying to ceiling fans/E/fan of any type in MES store yard including preparation to old painted surfaces by filling cavities etc and overhauling by providing correct grade of lubricant oil/wheel bearing grease complete including taking down and refixing of same places making/writing of MES No all as directed by Engineer-in-charge.

Supply and replacement exhaust fan frame cover made out of M.S sheet of any make and size as per existing exhaust fan with suitable size of nuts, bolts & washers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC Exhaust Fan 150 mm sweep with lovour complete all as specified and as directed

Cutting of existing wall and fixing of Exaust fan total making good plaster and white wash and suitable size of 04 Number faishner and fixing of any type exhaust fan complete all as specified and as directed .

Supply and fixing of PVC Exhaust Fan 200 mm with lovour complete all as specified and as directed.

Supply and fixing of PVC Exhaust Fan 250 mm Rust free Body ,copper motor with lovour complete all as specified and as directed.

Supply and fixing of PVC Fan 300 mm with lovour complete all as specified and as directed.

Taking down geysers of any type and any capacity due to rusting of bolts/seepage of wall and re-installation at any location including S&F in repairs of heavy duty pin type fastener 4” long and making necessary inlet/outlet electric & water supply connections from existing source to geyser complete all as specified and as directed.

S&F in repairs heating element, cup (round) type, 1.5 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

Description all as per serial item No.51 here-in-before but in tikona type Make : USHA / Bajaj / Recold.

S&F in repairs heating element, cup (round) type, 2.00 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

Description all as per serial item No53 here-in-before but in tikona type Make : USHA / Bajaj / Recold.

S&F in repairs 7 " thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. Make : USHA / Bajaj / Recold / Theta / Elcon.

S&F in repairs 11" thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. Make : USHA / Bajaj / Recold / Theta / Elcon.

S&F in repairs inner stainless-steel inner tank of 20 gauge sheet rated pressure not less than 8kg/sqcm suitable for 25 ltrs capacity geysers complete all as specified and as directed.

S&F in repairs inner stainless-steel inner tank of 20 gauge sheet rated pressure not less than 8kg/sqcm suitable for 50 ltrs capacity geysers complete all as specified and as directed.

Taking down UNSV/ Rushed / fatal hot water geyser capacity 25 Ltrs / 50 Ltrs from OTM / Mess / Accn etc of any make and repairing / Installation at same location by replacement of following items-

(a) Outer body of geyser Cap-50 Ltrs along with PV foam for heat retaining

(b) Outer body of geyser Cap-25 Ltrs along with PV foam for heat retaining

(c) Steel Inner tank of geyser cap-50 Ltrs, pressure ratintg 0.8 bar

(d) Steel Inner tank of gyser cap-25 Ltrs, pressure ratintg 0.8 bar

(e) Base plate with indicator suitable for cap-50 Ltrs

(f) Base plate with indiactor suitable for Cap-25 Ltrs

(g) Geyser assy suitable for Cap-50 Ltrs

(h) Geyser assy suitable for Cap-25 Ltrs

(j) Element suitable for Cap-50 Ltrs Geyser & 5 star rating

(k) Element suitable for Cap-25 Ltrs Geyser & 5 star rating

(l) Thrmostate suitable for 50 Ltrs Geyser

(m) Thrmostate suitable for 25 Ltrs Geyser

S&F in repairs base 09 Nuts assembly, compatible to existing geyser, with inlet and thermostat pipe with drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified and as directed.

S&F in repairs base 06 Nuts assembly, compatible to existing geyser, with inlet and thermostat pipe with drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified and as directed.

S&F in repairs indicator lamp for geyser of any type colour green & red complete all as specified and as directed. Make : Usha / Bajaj/ Crompton

S&F in repairs plug top 3 pin 15 Amp ISI marked complete all as specified and as directed. Make Anchor / Havells / Bajaj .

S&F in repairs bottom cover of MS sheet 20 gauge suitable for 25 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and as directed.

Description all as per ser item No 64 here-in-before but for 50 ltr geyser

S&F in repairs brass non-return valve 15 mm bore ISI marked screwed both ends and connecting to iron pipe in repairs complete all as specified and as directed. Make : Neta metal works/Orient/Leader/Bir.

Supply and fixing Plug socket board with metal socket and plug DP 20 Amp (I Phase ,1 Neutral and earth ) complete including taking down all as specified and as directed. (Make Legrand/ indoasian/ havells)

S&F in repairs 3 core PVC insulated copper cable of size 40/0.0076 multi stranded complete all as specified and as directed.

S&F in repairs pressure safety value confirming to relevant IS with washer suitable for 15 mm GI pipe suitable for 25/50 ltrs geysers complete all as specified and as directed. Make : Theta / Usha or

S&F in repairs of pressure release valve, confirming to relevant IS with washer suitable for 15mm bore GI pipe suitable for 25/50 ltrs geysers complete all as specified and as directed. Make : Leader/ Theta or ISI marked.

GI tubing medium grade of size 25mm bore ISI marked galvanized with all fittings such as bends, elbows, tees, check nuts, unions nipples etc for cold water pipe line complete all as specified and as directed including taking down old.

Description all as per item No 71 here-in-before but 20mm bore.

Description all as per item No 71 here-in-before but 15mm bore.

S&F in repairs of Heavey Stainless steel geyser connection pipe 304 Grade Graiding for extra connection including taking down complete all as specified and as directed. (size 18" mm)

S&F in repairs of Heavey duty PVC pipe( 36" inch for geyser connection pipe for extra connection inclluding taking down complete all as specified and as directed. Make : Usha / Bajaj/ Crompton

Supply and fixing LED lights fitting 1x 20WLED 6500K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy box type four feet with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed by Engr-in-Charge.

Supply and fixing of Plug type bib taps, cast iron, screwed for iron pipe and fixed of size 15/20 mm bore dia

Stop valves/angle vale 15mm , cast copper alloy, screwed down, high pressure,with crutch or butterfly handle, screwed both ends for ironpipe or for unions and fixed

M&L in repair of single pole and earth encloser with three pin and earth plug plus neutral with socket 32/40 Amps 240Volts complete indrustial type with Tripple pole MCB complete all as specified and directed IP-30 protation

Taking down carefully aluminum/copper point wiring (light/ fan/socket or power) complete with fittings such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCBs, Main switches from control board and making good disturbed surfaces of walls, floor to match with existing specifications complete all as specified.

Point wiring using approved colour coding as per ISI for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigidexisting conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications including taking down complete all as specified. (Make of copper conductor : Havells/Polycab/KEI) (Make of copper conductor : Havells/polycab/KEI) Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Description all as per serial item No 81 here-in-before but point wiring PVC surface conduit/casing caping 1.5 sqmm

Description all as per serial item No.81 here-in-before but for one 6 Amps socket outlet on the same board

Description all as per serial item No.81 here-in-before but for one 6 Amps socket outlet on the Independent board

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, 19/20mm dia, ISI marked, with and including new MS sunken boxes and suitable size of frame thickness minimum 01 sqmm cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications including taking down complete all as specified. (Make of copper conductor : Havells/polycab/KEI) Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC surface,conduit Casing caping heavy duty, ISI marked, with and including new sunken boxes and suitable size of frame, thickness minimum 1 sqmm cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete including taking down all as specified. (Make of copper conductor : Havells/polycab/KEI) Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Supply and fixing Switch piano type single pole , one way 6 Amps IS-3854 including taking down complete all as speciifed and as directed (Make: Anchor/legrand/indoasian)

Suply and fixing of Switch piano 16 Amp flush type universal type, conforming to IS-3854 complete including taking down all as specified and as directed. (Make: Anchor/legrand/indoasian)

M&L in repair of Lamp holder, insulated body, cord grip pattern SP 230 volt, including taking down complete all as specified and as directed. (Make: Anchor/legrand/indoasian)

M&L in repair of MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein & disposing from site complete all as specified and as directed. CATPARTNO 811176.(Make: Indoasian or its equivalent/legrand /CG )

M&L in repair of sheet metal enclosures double door ip 30 protation for DBs SPN 4 way 240 Volt with 200 Amps rated Busbar including taking down existing unserviceable DBs /board /box including accessories therein and disposing off complete all as specified and directed.CAT PART NO 811805 (Make: Indoasian or its equivalent/legrand /CG )

M&L in repair of sheet metal enclosures double door for DBs SPN 12 way 240 Volt with 200 Amps rated Busbar including taking down existing unserviceable DBs /board /box including accessories therein and disposing off complete all as specified and directed. CAT PART NO 81126.(Make: Indoasian or its equivalent/legrand /CG )

Supply and fixing LED light fitting mirror type with high out put diffuser 09 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge Make Havells/philips/bajaj

M&Lin repair Trippple Pole and earth encloser with three pin and earth plus neutral plug with socket 63 Amps 415 Volts complete indrustial type with Tripple pole MCB complete all as specified and directed IP-30 Protation CAT PART NO -811805 .(Make: Indoasian or its equivalent/legrand /CG )

M&L in repair of LED light fitting 1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.(Make Havells/philips/Wipro)

KARAN TRADERS

M/S M P Construction Co

CITY TOP ELECTRICAL WORKS

PAWAN KUMAR GOVT. CONTRACTORS