Loading
Loading…
Loading…
Tender Value
₹6.0 Cr
EMD Value
₹9.0 L
Closing Date
10 Jun 2026, 8:30 pm3d left
Bengaluru Central City Corporation
Providing Ornamental and Architectural Facade lighting to Heritage Buildings of Bengaluru under BRAND BENGALURU-VIBRANT BENGALURU in BCCC limits.
301413
BCCC/2026-27/EL/WORK_INDENT297
Open
Electrical
BCCC Electrical Division
29 documents required · 29 mandatory
Satisfactorily completed as a prime contractor for at least one similar work such as dynamic RGBW facade lighting works executed for Monuments/buildings/bridges/temples/gardens in the central government departments or state government departments or Public Sector Unit (PSU) to an extent of Rs. 300.40 lakhs as a single work (Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited, the works completed in the current financial year may also be considered for qualification). To support their technical capabilities, the contractor shall enclose photographs taken at site of the project (Minimum photographs-10 nos. for each sites)
Executed in any one year, in the state government departments or central government departments or Public Sector Unit (PSU) the following minimum quantities of work, 1) Multi Colour/ Mono Colour LED Flood Wash Light /LED Linear wall washer/ LED Strip Light -1032 Nos. 2) DMX controller-2 Nos.
Existing tender capacity & ongoing works and works for which tenders already submitted for the calculation of Assessed available tender capacity. (Notarized self declaration if there is no ongoing works and no tenders submitted)(as per Clause no.1.5 (A) & (B) of Section-3 and Clause no.-3.6 of Section-2).
Tenderer or his identified Sub All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3: Qualification information.
The tenderer should possess LED Luminaries OEM Authorization letter for participation in tender. Not applicable if OEM participates in tender.
The Tenderer,s identified OEM of LED Luminaries should have, a) Incorporated in India for at least 7 years. b) Have their own manufacturing facility in their name in India.(Tender Inviting Authority may visit the factory for verification). c) Average turnover of 6000 Lakhs in last 3 financial years. d) ISO certificate for Environmental Management System. e) ISO certificate for Occupational Health and Safety Management System. f) ISO certificate for Quality Management System. g) ISO certificate for Energy Management System. h) Bureau of Indian Standards (BIS), National Organization, which ensures that all LED products meet Indian Standards for safety, quality, performance and reliability (for standard light fixture). i) CE (Conformite Europeenne), a regulatory standard where the products are assessed by the manufacturer & deemed to meet EU safety, health and environmental protection requirements (for standard light fixture). j) RoHS (Restriction of Hazardous Substances), which restricts the use of 10 hazardous materials found in electrical and electronic products, their components and consumables not exceeding maximum concentration value as per standard (for standard light fixture). k) Standard Light fixtures should have LM80-Standard method of testing which measures the lumen depreciation or colors shift in LED modules or chips at certain conditions over a period of time. l) Standard Light fixtures should have LM79-It is the approved testing method by illuminating Engineering Society North America (IESNA) which measures electrical & optical characteristics of solid-state lighting products. m) Declaration to be furnished ensuring embossed logo of the OEM on the luminaire body to prove genuine brand.
The tenderer,s identified OEM of LED Luminaries should possess all the necessary equipments for the manufacturing of luminaires in his own factory.
The Tenderer should possess required valid Electrical license issued by Chief Electrical Inspectorate.
To qualify for award of this contract, each Tenderer in its name should have in the last five financial years i.e. (2021-22 to 2025-26).
Achieved in at least two financial years a minimum financial turnover in Electrical works of Rs. 600.79 lakhs (Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited).
The Tenderer should have valid GST and PAN registrations certificates.
The Tenderer shall furnish the latest letter of credit certificate / Bank overdraft eligibility certificate issued by any Nationalized/ Scheduled Bank for Rs. 180.25 lakhs.
Audited and certified Balance sheet and profit / loss Accounts for last five financial years with a certificate of verification issued by the chartered accountant. (as per Clause no. - 3.2(a) of Section-2).
Name, address, and telephone numbers and e-mail of the Tenderers bankers who may provide references if contacted by the Employer.(as per Clause no.-1.9 of Section-3).
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under. Assessed available tender capacity (AxNx1.5-B) Where, A, Maximum value of lighting works executed in any one year during the last five years (updated to 2026-27 price level)taking into account the completed as well as works in progress. N, Number of years prescribed for completion of the works for which tenders are invited(6 months/12 months), 0.5 years. B, Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next one year.
Bidder shall upload scan copy of the Part Bank Guarantee of EMD as per the Section 10(B) (FORMAT OF BANK GUARANTEE FOR EMD).
The Tenderer shall furnish PRE-TENDER SITE VISIT CONFIRMATION CERTIFICATE and submit written proof of such visit, along with relevant details, in the format specified under Clause 1.15 of Section 3.
Self-Declaration affidavit attested by the Notary in the format mentioned in Format 4(E) of Section-4.(as per Clause no.-3.2(e) of Section-2)
Notarized declaration of the OEM about Embossed Logo of LED luminaries. Format 4(H) of Section 4. (as per Clause no.-3.2(h-13) of Section-2)
Self declaration of tenderer about litigations (as per format 4(F) of Section -4 and as per 1.12 of Section -3).
₹5,000
₹9.0 L
27 May 2026
27 May 2026
11 Jun 2026
29 May 2026
1 Jun 2026
Providing Ornamental and Architectural Facade lighting to Heritage Buildings of Bengaluru under BRAND BENGALURU-VIBRANT BENGALURU in BCCC limits.
SITC of high quality long through multicolor wash light, Protection Rating IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1) 2012" and having CE certification against standard "Low Voltage Dire...
SITC of high quality long through multicolor wash light, Protection Rating IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1) 2012" and having CE certification against standard "Low Voltage Dire...
SITC of high quality long through multicolor wash light, Protection Rating IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1) 2012" and having CE certification against standard "Low Voltage Dire...
SITC of high quality long through multicolor wash light, Protection Rating IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1) 2012" and having CE certification against standard "Low Voltage Dire...
SITC of high quality long through multi color Linear wash light, Protection Rating IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1) 2012" and having CE certification against standard "Low Vol...
SITC of high quality long through multi color Linear wash light, Protection Rating IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1) 2012" and having CE certification against standard "Low Vol...
Supply, Installation, Testing and Commissioning of RGB/RGBW LED non-integral flexible strip luminaire of 5m length with system wattage in the range of 10-13W/m with minimum system lumens of 450 lumen...
Supply, Installation, Testing and Commissioning of DC power driver for Lights, Power 200W, Input AC 110-240V AC, 50Hz, Output DC 12/24V, Protection rating, IP65, Surge protection LL 4KV, LE6KV.
SITC of Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, DMX audio players and fountains...
Supply, Installation, Testing and Commissioning of IP65 I power connectors easy and extremely precise locking system. High impactmaterials - long-lasting and reliable.
Supply, Installation, Testing and Commissioning of IP65 I DMX connectors having 3/5 pole cable connector, Male/Female connector with improved latch, cage type contacts, solder stop for easy soldering,...
Supply, Installation, Testing and Commissioning of DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputs from a 1 input and Input voltage AC 110 to 220 V, 50 Hz, Product f...
Supply, Installation, Testing and Commissioning of IP65 5 pin XLR Male and Female connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, solder stop f...
Supply, Installation, Testing and Commissioning of 5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DM...
Supply, Installation, Testing and Commissioning of PVC insulated multi core electrical unarmoured flexible 5C x 0.5Sq mm power cable having less electrical losses. (As per actuals depending upon the s...
Supply and fixing IP 67 boxes as per site complete etc as required.
SITC of DMX de-coder for RGB LED strip. The job includes the cost of carraige and erection of the fitting on wall/ceiling with steel anchor fastener as required at site with cost of all petty material...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase /...
Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC cei...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
(L T Cable) 35 to 95 Sqmm
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 35 Sq...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm...
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. In soil (ordinary)
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 95/100 ...
Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation,...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying 100 amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.
3rd year Comprehensive Annual Maintenance Charges after DLP which includes repairs and replacement of failed components/fixtures including labour charges and periodical site inspection with department...
4th year Comprehensive Annual Maintenance Charges after DLP which includes repairs and replacement of failed components/fixtures including labour charges and periodical site inspection with department...
5th year Comprehensive Annual Maintenance Charges after DLP which includes repairs and replacement of failed components/fixtures including labour charges and periodical site inspection with department...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
notification 01.pdf
Others - Tender notification • 1.96 MB
All Buildings Bid doc.pdf
Tender Document • 1.17 MB
Download all tender documents and submit your bid