UG_I_ Kasba Kasganj ke ward 12 gali No 07 main Moolchndra ka makan se Vinay Saxena ke makan tak rubber mould tile Sadak/nail Nirman karya

consolidation of 22.4-53mm gauge stone ballast 10cm thick loose coat including repairing of patches picking up to old surface spreding ballast making medhies to retain water and carriage of water in comp.position

M-150 brick work in (1:4) mortar with cement and f/sand in drain in comp.position (s.i-6.1.1)

12 mm thick plaster in( mortar with :4)cement and f/sand on brick work in comp position (s.i-13.4.1)

Steel reinforcement for RCC wok including, straighting, cutting, bending, placing in poition and binding all complete upto plinth levele cold twisted bars

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinthand string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up 6 to floor five level, including cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

supply and laying of 80mm thick cc rubber mouid tile I-shape mechanically compressed interloking paver block manufactured by high pressure and control vibration machine having plan dimension 200*(160+120mm)with minium 5mm topping of O.P cement mixed with 25% marble powder .The compressive strength of concrete paver block shall not be less than 30Mpa and 4.5 kg per no.including cost of all material labour T&P etc Also including leveling and dressing of surface up to required level and slop filling joints with local sand (s.i-16.68 take 50% coloured tile

supply and laying of 80mm thick cc rubber mouid tile I-shape mechanically compressed interloking paver block manufactured by high pressure and control vibration machine having plan dimension 200*(160+120mm)with minium 5mm topping of O.P cement mixed with 25% marble powder .The compressive strength of concrete paver block shall not be less than 30Mpa and 4.5 kg per no.including cost of all material labour T&P etc Also including leveling and dressing of surface up to required level and slop filling joints with local sand (s.i-16.68 take 50% gray tile

S/fixing sign board at site in comp.position

Add GST 18% (+)

Please Enable Macros to View BoQ information