REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION AND MISC E/M WORKS IN CENTRAL AMENITIES UNDER AGE E/M-I OF GE (NORTH) MAMUN

Amount

Supply, laying in trenches or fixed to wall/pole or passing through pipe cable LT 1100 volts, XLPE insulated, armoured heavy duty electric cable, with alumn conductor of size 6 Sqmm X 2 core complete all as specified and directed.

All as per Srl item No 1 above but for size 10 Sqmm X 2 core.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushion to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying (total punned thickness 23cm) stretching and testing the cable complete all as specified and directed.

M&L for Sub class ‘B’ bricks old size, laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 ( using 20mm graded stone aggregate ) for foundation of bollard lights, floor/road repair including form work etc complete all as specified and directed.

M&L for GI tubing light grade 40 mm bore with fittings, laid for protection of cable under road crossing fixed to walls or pole including 2 Nos of FI clamps of suitable size with nuts and bolts including taking up/down old GI tubing complete all as specified and directed.

All as per Srl item No 9 above but for size 25mm bore.

S&F cyllindrical shaped 9/10W LED bollard integral decorative light with opal acrylic diffuser and IP 65 protection having height 0.6m including grouting the base on PCC by means of suitable size of Anchor Bolts and making electrical connection, testing complete all as specified and directed.

S&F cyllindrical shaped 9/10W LED bollard integral decorative light with opal acrylic diffuser and IP 65 protection having height 1.0 m including grouting the base on PCC by means of suitable size of Anchor Bolts and making electrical connection, testing complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (light/fan/Bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, regulators, light fitting etc removing materials to store for keeping in safe custody for taking credit complete all as specified and directed.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated sheathed /multi stranded copper conductor cable (Phase, neutral and earth wire) drawn through and including concealed PVC conduit medium grade of dia not less than 20mm and 1.8mm thick and connected to common earth dolly with 1.6 mm thick cadmium plated sunken CI/GI pressed steel terminal boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws for mounting switch, socket, fan regulators etc including making connection of cable with MCBs through proper size copper/brass thimbles for one light/bell/fan/exhaust fan point controlled by one 1 way switch complete all as specified and directed.

All as per Srl item No 14 here in before but for 5 Amp socket outlet point on independent board controlled by one switch 5 Amp one way.

All as per Srl item No 14 here in before but for 5 Amp socket outlet point on same board controlled by one switch 5 Amp one way.

All as per item No. 14 above but with 3 x 2.5 Sqmm for 15 Amps socket/power point.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed /multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through existing conduit and connected to common earth dolly with 1.6 mm thick cadmium plated sunken CI/GI pressed steel terminal boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws for mounting switch, socket, fan regulators etc including making connection of cable with MCBs through proper size copper/brass thimbles for one light/bell/fan/exhaust fan point controlled by one 1 way switch complete all as specified and directed.

All as per Srl item No. 18 here in before but for 5 Amp socket outlet point on independent board controlled by one switch 5 Amp one way.

All as per Srl item No. 18 here in before but for 5 Amp socket outlet point on same board controlled by one switch 5 Amp one way.

All as per Srl item No. 18 here in before but for one light point controlled by two 2 way switch.

All as per item No. 18 above but with 3 x 2.5 Sqmm for 15 Amps socket/power point.

S&F switch piano flush button single pole one way 5 amp 240 volts, all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 amps, flush type, 240 volts all as specified and as directed.

S&F switch 15 Amps, flush type with shutters, 240 volts all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type, 240 volts all as specified and as directed.

S&F switch socket combination 2 in 1, 5 Amp flush type, 240 volts all as specified and as directed.

S&F stepped type electronic fan regulator not less than 100w, flush type Socket type on the existing phenolic laminated sheet etc all as specified and as directed.

S&F switch piano flush button single pole two way 5 Amp 240 volts, all as specified and as directed.

S&F Bell push, flush type, 5 amp AC 230 Volt etc complete all as specified and directed.

S&F ceiling rose jumbo type PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

S&F modular socket 6/10 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.

S&F modular switch one way 6/10 Amp one module, front operated complete all as specified and directed.

S&F modular switch piano type flush button single pole 16/20 Amp one module, front operated complete all as specified and directed.

S&F modular socket 6 Amp/16 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.

S&F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as spd and directed.

S&F Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed.

S&F fancy type jumbo Lamp holder, PVC/Polycarbonate type with back plate complete all as specified.

Taking down carefully unserviceable copper/aluminium sub main wiring of any size including old broken steel/PVC conduit and removing materials to store for keeping in safe custody for taking credit complete all as specified.

S&F sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated multistranded sheathed flexible copper conductor 4 sqmm size (green colour) cable as earthing lead connecting to main earth dolly drawn in and including non metallic PVC concealed conduit complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface all as specified and directed.

All as per Srl item No 40 but size 6 Sqmm.

All as per Srl item No 40 but size 6 Sqmm drawn through existing conduit.

S&F 20W surface / wall mounted box type batten LED luminaire, extruded polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life luminous efficacy > 100 lumens/Watt, CRI>80 with 5700+/-300K CCT operating and voltage 140V-240V including fixing on PVC square block complete with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified.

S&F surface mounted Decorative,uplight light fitting including for 9 W LED lamp and with decorative diffuser and mounting clips and lamp holder , wall mounting arrangment and all as specified and directed.

S&F Decorative 10Watt 2' LED box type batten with inbuilt driver and wall mounting arrangment and all as specified and directed.

S&F round surface mounted 18Watt LED panel having polycarbonate housing and high translucent frosted pc diffuser with inbuilt driver with efficacy 100Lm/W, CRI>80 with 5700+/-300K CCT complete complete all as specified and directed.

S&F LED 36Watt 2x2 recess mounted panel having polycabonate housing with LEDs and high quality diffuser inbuilt driver, efficacy 100Lm/W, CRI>80 with 5700+/-300K CCT complete suitable for grid ceiling including taking out old unserviceable recess fitting complete all as specified and directed.

S&F in replacement SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC having copper bus bar of rating 200Amps complete all as specified and directed.

All as per Srl item No. 49 but for 8way DB.

All as per Srl item No. 49 but but for 4way DB.

All as per Srl item No. 49 but but for 2way single door DB.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 6 to 32 Amp all as specified and directed.

S&F MCB SPN 240V, 50Hz, 10 KA,of rating 32Amp all as specified and directed.

S&F MCB SPN 240V, 50Hz, 10 KA,of rating 40-63Amp all as specified and directed.

S&F sheet metal enclosures double door VTPN MCB DB 4 way 415 V AC, 50 Hz with 250Amps rated copper bus bar complete with IP 43, IK-09 protection suitable for flush mounting into the wall including MCCB 63Amps, 4P, 16kA breaking capacity with fixed magnetic and thermal setting of same make as of DB and making connection with cable by means of suitable size of Al thimbles including making good the disturbed surface and matching with the existing surface specification complete all as specified and directed.

S&F hylam/masonite sheet 3mm thick with brass screws for repair to existing switch board by taking out the old existing serviceable switches, sockets, regulators and refixing the same after replacement of old unserviceable/broken Hylam sheet of size upto 7"x4" including .

All as per item No 57 but of size 8"x10".

S&F concealed GI sheet metal box (18 Guage) including Modular cover plate with support frame(inner and outer) of 1/2/3 module rectangular shaped including flushing GI box in the wall and making good the disturbed surface complete all as specified.

All as per Srl item No 59 but for size 4/6 module.

All as per Srl item No 59 but for size 8 module rectangular or Square.

All as per Srl item No 59 but for size 12 module Square.

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 67,570.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

DHANI BUILDERS

KULBHUSHAN AGGARWAL

M/s USHA ENTERPRISES