Annual maintainance of existing Traffic Signals at ITI Chowk, Sector 12 nirmal kutia chowk, Sector 14 (Government collage chowk), Sector 12-13 Chowk (in front of SBI Bank), and at Sector 13-14 Chowk (in front of Giridhar hospital) under Municipal Co

Amount

Maintenance of Existing “Safetrans Make” Traffic Control Signal with minor repair periodical servicing programming with functional software including replacement of fuses,di-carbon of links including upgradable software editing, including hardware replacement except hardware as required, complete job. Detail :- 1 jobs (monthly required for each junction) x 5 nos. (junctions) x 12 month= 60 nos.

Existing Traffic Signal Controller Current & voltage monitoring system for single phase load up to 3.5 KVA. It protects from high voltage, Low voltage, Spikes, Fluctuations, 16A overload fault and it also displays incoming voltage, set voltage automatically to the device & on delay as per setting schedule (recommended Existing SAFETRANS ) Detail :- 1 jobs (yearly required for each junction) x 5 nos. junctions = 5 nos.

One time Repair of blinkers installed at Various places in Karnal

PART- B (List of material will be used, when signal is being damage in future) (If Required) Replacement of CPU Controller Card compressed type/old version make Existing safetrans.

Replacement of LDI Card of Controller Existing safetrans make.

Replacement of main Supply Card of Controller (Make Existing safetrans).

a) Replacement of Transformer Kit of Controller (Convergence/ Salac)

b) Heavy duty 24 V 20 AMP. Transformer

Replacement of burned/damage multi core cable conductor a) 14 Core Cable

b) 4 Core Cable

c) 10 core

Replacement of Traffic Signal Aspect EC size for 300mm as per Standards 1- Only module size 13x13, 300mmPC

2- Complete with LED set with module a) (Red/amber)

b) (Green/Arrow)

3. SMP Card for LED,S c) (Red/amber)

d) (Green/Arrow)

4. LED’s Retro Kit e) (Red/amber)

f) (Green/Arrow)

5. Front Hood PC (Make Existing SAFETRANS)

Replacement of UPS system Convergence Make suitable to Microprocessors based traffic signal controller

Replacement of junction Box (SINTEX)

Replacement of Count Down Timer accessories/ hardware (Make Existing SAFETRANS JUMBO 12”) 1. Complete New system

2. Complete Drive card Kit

3. Complete hardware replacement including black paint

Supply of 4 Pulses microprocessor based blinker flasher card kit with SMPS system( Existing Safetrans)

Replacement of burnt , damaged Fuses kit Total 24 Fuses with mater fuse( Existing Safetrans)

Replacement of Aspect stand with Clamps etc.

Painting of poles with traffic Yellow Paint a) Cantilever Pole 28 Feet long with bracket

b) Standard Pole 20 feet long

c) Controller/UPS Cabinet

Programming Change (Change of current Programs)

Cantilever poles: - This signal post consists of 3 sections 6”/5”/2” dia made from mild steel B class pipes

Supply & erection of Standard pole made from mild steel B class 100mm dia pipes. The signal post is capable of holding vehicular as well as pedestal faces the overhang assembly is provided for minimum clearance of pole from G/L Total height of pole varies from 20 feet long. (Designed as per International Traffic Rules & standards)

NEW CONTROLLERS AS PER APPROVED STANDARDS (Existing SAFETRANS) New controllers as per approved standard.

Traffic Soloution