E.T.No.11(W)/EDCH/2025-26

Amount

33@11 ds0oh0 fo|qr midsUnz flEHkkoyh ls fuxZRk 11 ds0oh0 fl[kSMk iks”kd ls iksf”kr xzke fl[kSMk esa ,u0,p0&24 ds ikl LFkkfir 63 ds0oh0,0 ifjorZd ls fuxZr ,y0Vh0 ykbZu dks nwljs LFkku ij f’k¶V djkus dk dk;ZaA

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of PCC Pole 8.5 Mtrs/9 Mtrs/11 Mtrs long support from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road. Appoximate Distance 80 KM.

Erection & Fixing of PCC Pole 8.5 Mtrs/9 Mtrs/11 Mtrs long in LT. line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing L.T. Pin Clamps, M.S. Flat of size 50x6 & Schacle Insulator of size 75x90mm, with proper size nuts and bolts.

Grouting of following STP/PCC Pole supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Providing and fixing of Suspension Clamp with Eye Hook as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of Dead End Clamp with Eye Hook, as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of Piercing Clamp as per RESPO/Norms and as per direction of site incharge.

Laying of LT ABC of various capacity and completion work properly, as per RESPO/Norms, and as per direction of site incharge.

Carriage of old & damaged scrap ABC/Acsr Conductor, from site of work to Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road.,

Jumpering work properly as per RESPO/Norms.

33@11 ds0oh0 fo|qr midsUnz flEHkkoyh ls fuxZRk 11 ds0oh0 fl[kSMk iks”kd ls iksf”kr xzke fl[kSMk esa ,u0,p0&24 ds ikl LFkkfir 63 ds0oh0,0 ifjorZd ls fuxZr ,y0Vh0 ykbZu dks nwljs LFkku ij f’k¶V djkus dk dk;ZaA

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of PCC Pole 8.5 mtrs./09 mtrs Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of PCC Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Erection & Fixing of PCC Pole 11 mtrs. long in 33KV/11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

Erection of double pole structure with all accessories on PCC Pole 8.5 mtr./09 mtrs./11 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33KV/11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.

Safely installing the old & used 63KVA transformer with the help of crane/manual labour at LT Sub-Station Double Pole/Plinth, as per direction of site incharge.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.

Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Grouting of Stay supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Fabrication of Guarding Angle X Arm & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow, and as per direction of site incharge.

Laying , Stringing and final sagging of ACSR Weasel Conductor, as per RESPO/Drawing Norms and as per direction of site incharge.

Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.

Dismentalling of old D/P Support after digging of pit and opening of all accessories, bracing channal etc.

Safely dismantling/removal and carriage of old & used ACSR Conductor from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Safely dismantling/removal work properly and carriage of old & used 25/63KVA T/F from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Jumpering and line energisation work properly as per RESPO/Norms and as per direction of site incharge.

33@11 ds0oh0 fo|qr midsUnz nfRRk;kuk ls fuxZRk 11 ds0oh0 NrukSjk xzkeh.k iks”kd dh 11 ds0oh0 ykbZu dks nwljs LFkku ij f’k¶V djkus dk dk;Z A

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of ST Pole 09 mtrs/11 mtrs./13 mtrs Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of PCC Pole 8.5 mtrs./09 mtrs Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Erection & Fixing of PCC Pole 8.5 mtrs./09 mtrs long in 33KV/11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

Erection & Fixing of STP Pole 09 mtrs./11 mtrs./13 mtrs. long in 33KV/11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.

Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Wrapping of barbed wire on 33 KV & 11KV ST/PCC poles as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a hieght of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts and all other required material and T&P., as per direction of site incharge.

Fabrication of Guarding Angle X Arm & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow, and as per direction of site incharge.

Laying , Stringing and final sagging of ACSR Rabbit Conductor, as per RESPO/Drawing Norms and as per direction of site incharge.

Providing and fixing of M.S Holding Clamp with Nut & Bolt Off size as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of L.T Pin Insulator with Nut & Bolt Off size, as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of F Clamp with Nut & Bolt Off size, as per RESPO/Norms and as per direction of site incharge.

Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.

Safely dismantling/removal and carriage of old & used ACSR Conductor from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Safely dismantling/removal work properly and carriage of old & used STP/PCC from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Jumpering and line energisation work properly as per RESPO/Norms and as per direction of site incharge.

33@11 ds0oh0 fo|qr midsUnz xksgjk ls fuxZRk 11 ds0oh0 xksgjk xzkeh.k iks”kd dh 11 ds0oh0 ykbZu dks nwljs LFkku ij f’k¶~V djkus dk dk;ZA

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of ST Pole 09 mtrs/11 mtrs./13 mtrs Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of PCC Pole 8.5 mtrs./09 mtrs Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Erection & Fixing of PCC Pole 8.5 mtrs./09 mtrs long in 33KV/11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

Erection & Fixing of STP Pole 09 mtrs./11 mtrs./13 mtrs. long in 33KV/11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

Erection of double pole structure with all accessories on PCC Pole 8.5 mtr./09 mtrs./11 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33KV/11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.

Safely installing the Old & Used 25 KVA & 63 KVA transformer with the help of crane/manual labour at LT Sub-Station Double Pole/Plinth, as per direction of site incharge.

Laying of LT ABC of various capacity and completion work properly, as per RESPO/Norms, and as per direction of site incharge.

Providing and fixing of PG Clamp with Nut & Bolt off size as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of F Clamp with Nut & Bolt off size as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of M.S Holding Clamp with Nut & Bolt off size as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of P.R.C with Nut & Bolt off size as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of J Type Hook with Nut & Bolt off size as per RESPO/Norms and as per direction of site incharge.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.

Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Grouting of Stay supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Laying , Stringing and final sagging of ACSR Dog Conductor, as per RESPO/Drawing Norms and as per direction of site incharge.

Erection & Fixing of 11KV. Fuse set on STP/PCC Pole, by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge.

Dismentalling of old D/P Support after digging of pit and opening of all accessories, bracing channal etc.

Safely dismantling/removal work properly and carriage of old & used STP/PCC from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Safely dismantling/removal and carriage of old & used ACSR Conductor from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Safely dismantling/removal work properly and carriage of old & used 25/63 KVA T/F from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Jumpering and line energisation work properly as per RESPO/Norms and as per direction of site incharge.

Yash Contractor (BID ID -5264427)