CERTAIN MISC REPAIRS/ REPLACEMENTS TO BLDGS IN ALSC, ORTHO, UROLOGY, CARDIOLOGY DEPT AND OTHER MD AND OTM ACCN AT BASE HOSPITAL UNDER GE (E/M) BHDC-10

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M&L Vitrified ceramic tiles dark /shade double charged ultra charged Ist quality 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No. 2 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M&L for Non-skid Coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors, set and jointed in neat cement slurry and pointed in white cement to match the shade over and including 15 mm thick screed bed in cement mortar complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertifical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match over and including 10 mm th rendering in cement mortar 1:4 complete all as specified and as directed.

M&L 80 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-40 Grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern as approved by Engr-in-Charge/ GE over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks on the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L cement concrete rich colored chequered tiles machine pressed with imported pigment finish (mirror/rough cast) of size 300mmx300mmx25 mm) thick set and jointed with neat cement slurry, over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F Kerb stone of size 300x300x 100mm thick precasted with plain cement concrete type B0, 1:2:4, (using 12.5mm graded crushed stone aggregate) incl necessary earth work for laying kerb stones complete all as specified & directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc complete all as specified & directed.

M&L 20 mm thick Granite work in platforms, partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Dismantling wall, ceiling boards (Fibre pulp. Insulation, AC boards, wooden boards etc) or insulation boards/slabs/composite panel, etc any thickness including existing snap grid or ceiling cover fillets complete all as specified and as directed.

S&F GRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 mm white colour of approved texture,design (Tegular) and patterns having moisture content less than 2%, humidity ressitance of 99% NRC 0.60 to 0.85 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85%(Min) to be laid in true horizontal level suspended on interlocking metal 'T' grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per sqm including both sides) comprising of main 'T' runners of size 15 x 32 mm of length 3000mm,cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed. (Make- Dimond, Armstrong or equivelent) Note: Contractor has to submit the drawing to the Engr-in-Charge and get the same approved before execution of GRG work.

M&L Solid PVC Wall Panelling consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing approved by Engr-in-Charge complete all as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Taking down chowkhat or frame without taking off shutters of any description exc 1.5 sqm and n-exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame without taking off shutters of any description not exc. 1.5 sqm complete all as specified and directed.

S&F for steel section for posts and struts door frame including cutting to shape/ size required as directed, including holdfast/ hinges and all necessary welding, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F aluminium powder coated window and ventilator shutter ,side hung type without sas bar, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , anodised aluminium fitting such as peg stays 150mm long (1 No), hinges tyjpe B-21 100mm long (2 Nos) suitable handle (1 No|) complete all as specified and directed.

S&F aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all specified and directed.

S&F 150 mm Aluminium handles, cast type anodised complete all as specified and directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.

S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repair extruded aluminum alloy section body door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each cast iron body all as specified and directed. Make : Hardwyn/ Godrej/ Universal

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete for glass/aluminium door complete all as specified and as directed.

S&F in repair brass mortice lock vertical type 100mm size 4 levers for aluminium door with duplicate keys complete all as specified and as directed.

S & F 12mm mm thick PVC moulded solid board both side prelaminated for door and partition complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed.

S & F 5.5mm thick Frosted glass and glazing with oil putty in square n exc 0.5 Sqm in each pane or rubber beading as required complete all as specified & directed.

S & F 5.5mm thick Frosted glass and glazing with oil putty in square exc 0.5 Sqm in each pane or rubber beading as required complete all as specified & directed.

Demolition of Mud in roofs, any thickness, including PCC/plastering and leeping complete and removing the spoil to a distance required for disposal of waste material/dabries as per guideline issued by NGT Delhi including loading, unloading and stacking at the destination all as specified & directed.

M&L providing plain cement concrete, type B-1, 1:2:4 (using 12.5 mm graded stone agg) as in roof kerbs, padding, rounded or chamfered on edges complete all as specified and directed.

M&L 20 mm thick rendering on concrete surface of roof with cement mortar 1:4 finished even and fair including mixing of water proofing compound @ 2% by weight of cement or as per manufacturers instruction complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately.)

Supply only water proofing compound.

M&L roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 CM end over laps & 10 cm side over laps etc as per manufacturers instruction. (c) M&L for finishing of top surface by a coat of aluminium paint complete all as specified and directed. Note:

Cutting grooves 75 mm wide & 65 mm deep in brick wall/ RCC surfaces at any location, shaping horizontal face with mechanical cutter and grooves filled with PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) mixed with chemical compound SUPER LATEX OR DR FIXIT OF PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD mixed with proportion 200 ml per 50 Kg cement as per manufactures instruction complete all as specified & as directed.

Demolition of brick work built in cement mortar complete all as specified and directed

M&L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed

M&L for taking down of existing cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 10-12mm thick polymer modified readymix cement based plaster Make: Ultratech (Brand name Readiplast)/ Dr Fixit/ Birla Aerocom/ Godrej complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:6 as per manufactureer's instructions , on fair faces of brick masonry or concrete surfaces finishd fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 13 in ceiling surface finishing surface fair and even without using extra cement complete all as specified and as directed.

M & L for 10-12mm thick polymer modified readymix cement based plaster Make :Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufactureer's instructions , on fair faces of brick masonry or concrete surfaces finishd even and smooth .

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 white marble stone chipping 10mm nominal size with colour compound) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. (Note: Payment for providing grooves shall be made separately).

Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

M&L for applying two coats of cement based paint on newly plastered surfaces including preparation of surfaces complete all as specified and as directed

M&L for preparation of new wall surface and applying two coats of plastic emulsion interior gde paint of tint as approved on walls over and including a coat of priming paint over and including applying 3 mm thick wall care putty complete all as specified and directed.

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound emulsion distemper over a coat of alkali resistant primer complete all as specified.

M & L for preparation of newly plastered surface of ceiling and applying two coats of oil bound emulsion distemper over a coat of alkali resistant primer complete all as specified.

S&F in repair white water closet floor mounted two piece Closet 'S' Trap Square of size 475 x 340 x 750 mm with soft close seat cover with twin flush fitting with Cistern, Make- Prayag Cat No 4129 or equivalent Model of make specification in PS.

S&F in repair One piece white Wash Basin with Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. Make : Prayag Cat No : 4602 or equivalent Model of make specification in PS.

S&F in repair Table Top Thin Rim Wash Basin snow white size 500 x 395 x 135mm. Complete all as specified and directed. Make Cera Cat No : S2020153 or equivalent Model of make specification in PS.

S&F in repair Vitreous China Urinal, Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, complete all as specified and directed.

S&F in repair Urinal with integrated EFS size 320 x 300 x 525 mm snow white colour complete all as spefified and directed Make Cera Cat No : S4010102 or equivalent model of makes specified in PS.

S&F in repair 15mm bore Deck mounted high neck sensor tap for table top washbasins complete all as specified & directed. Make : Cera Cat No.: F6010108 or equivalent model of makes specified in PS.

S&F in repair 15mm bore centre hole basin mixer with round spout with 450mm long copper pipes and brass nuts with out Pop up complete all as specified & directed. Make: Prayagx Cat No 9250 equivalent model of makes specified in PS.

S&F in repair Vitreous china urinal partition white of size 310 x 700mm complete all as specified and directed.

S&F in repair CP Bib Cock 15mm long body with flange complete all as specified and directed. Make : Prayag Cat No : 6508 or equivalent model of makes specified in PS.

S&F in repair 15mm bore angular stop cock with wall flange complete all as specified and directed Make: Prayag Cat No PIS-10H or equivalent model of makes specified in PS.

S&F in repair urinnal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all specified and directed.

S&F in repair PVC connection 15mm bore with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair CP Towel Rail 600mm long fixed with and including Chromium plated brass screws and plastic cleats complete all as specified and directed. Make : Prayag Cat No : BA-01 or equivalent of makes specified in PS.

S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for WHB complete all as specified and directed.

S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for urinal complete all as specified and directed.

S&F in repair Corrugated Waste Pipe 32 mm dia for urinal complete all as specified and directed.Make : Prayag Cat No 327 or equivalent of makes specified in PS.

S&F in repair Corrugated Waste Pipe 32 mm dia for WHB complete all as specified and directed.Make : Prayag Cat No 327 or equivalent of makes specified in PS.

S&F in repair Full Glass Shelf 450 mm (with brass brackets) complete all as specified and directed,.Make : Prayag Cat No : BEA-55 or equivalent of makes specified in PS.

S&F in repair corner Glass Shelf 300mm (with brass brackets) complete all as specified and directed. Make : Prayag Cat No : BEA-44 or equivalent of makes specified in PS.

S&F in repair CP Soap Dish including chromium plated brass screws and plastic cleats complete all as specified and directed. Make : Prayag Cat No : BA-05 or equivalent of makes specified in PS.

S&F in repair CP Soap Dispenser with holder including chromium plated brass screws and plastic cleats complete all as specified and directed. Make : Prayag Cat No : BA-83 or equivalent of makes specified in PS.

S&F in repair Chromium plated 2 in 1 Faucet (1mtr Braided Tube) with Hook complete all as specified and directed.Make : Prayag Cat No BEA-95-S or equivalent of makes specified in PS.

S&F in repair PEG Set 6 (Zinc) complete all as specified and directed.

Dismantling of CI pipes & fitting of any description & position up to 100 mm dia complete all as specified & directed.

S&F PVC (SWR) pipe 110mm dia single socketed, in any length with rubber ring jointes , laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm dia single socketed, in any length with rubber ring jointes , fixed on wall complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store complete all as specified and directed.

S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking down old unserviceable horizontal/ vertical venition blinds of any description and in any position complete all as specified and directed.

S & F new vertical venition blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminum top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed by Engr-in-Charge.

Dismantling unframed timber scantlings in fillets, rails, Posts, rafters, purlines etc under 40 Sqcm in section complete all as specified and directed.

Dismantling plain or corrugated Asbestos cement (Corrugated semicorrugated, etc) sheets in froof covering complete all as specified and directed.

S&F steel tubular Column, Rafter,Purline etc. including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979gradeSt- 240 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and as directed.

S&F MS framed work such as grills, grating etc. with ends of bars shoulder and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders framed balusters walkways, water staging etc conforming to Fe- 290 Gde E-165 complete all as specified and as directed.

S&F(plain or chequered ) channels, square cut or notched (oridinary and counter sunk) forming holes , w/o any attatchment complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of RCC slab of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L precast reinforced cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs for shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.

Mild steel deformed (TMT) 5 to10 mm dia., and cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O complete all as specified and directed.

M & L PCC type B2 1:2:4 Using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed.

M & L 75mm thick PCC type D2 100mm thick 1:4:8 Using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Taking down old broken wooden kitchen cupboard from wall including fastener complete all as specified and as directed.

S&F box type Cup Board made out of 18/19mm thick PVC moulded solid board, one side prelaminated, with self and shutter, full size fitted under/ above the kitchen cooking platform and other platform including provision of all fixing arrangement /fitting & fixtures (magnetic catches, piano hinges, knob, SS Screws etc) complete all as specified and as directed.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity complete all as specified and directed.

S&F 1000 ltr Rotational moulded Polyethylene water storag tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in position complete all as specified and directed.

S&F in repair 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwedfor iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

M&L for preparation of Old plastered wall surfaces & applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of Old ceiling surfaces & applying one coat of oil bound distemper complete all as specified and as directed.

M&L for PCC type CI 1:3:6 using 20mm graded crushed stone aggregate in plinth courses, string courses, lacing courses, complete all as specified and directed.

S&Fin repair precast cement concrete louvres and jallies 25 mm thick type B0 1:2:4, set in CM 1:6 (mea sured solid), including all mould- ings cmplete all as specified and directed.

S&F precast cement concrete in coping type B0 1:2:4, set in CM 1:6 (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in CM 1:6 mortar complete with joints to match complete all as specified and directed.

M&L for CEILING PANELS: Pre-fabricated Modular ceiling Panels, 50mm thick, with sloping panels PUF panels, between one sheets of 0.8mm & One Sheet 0.5 mm PPGI (Pre Painted Galvanized Steel) having PUF density of 40kg/m3 with proper supports. Wall panels shall be fixed to the floor with Channels & anchor fastener and interlocked with each other thru CAM LOCK system. Ceiling Panels shall be supported with wall panels thru L type Flashing, CAM LOCK system and ceiling support system as required. Panels including cutouts for lights, pendants, electrical switch sockets etc. Antibacterial & Antifungal paint coating supply and installation of jointless coating: for wall ceiling and corner panels: filling of all joints and cavities with metal epoxy filler and sanded flush to provide a seamless finish including one primer and three coats of antibacterial and anti fungal paint equivalent to a min dry film thickness of 300microns complete all as specified and as directed. (Paint- SKK Japan/ Acro/ DULUX) (PPGI Sheet Make‐ Tata Steel/ Jindal/ JSW. (Make- MHS, CHP, MR)

M/S GEETANJALI ENTERPRISES

sony engineering works

Vishal Traders

R R Associates

M/s SAAR ENGINEERS