REPAIRS TO SECURITY WALL, BOUNDARY WALL AND FENCING OF AREA II UNDER AGE B/R CENTRAL GE (WEST) COLABA MUMBAI.

Amount

Dismantling fencing wire mesh of any type and descriptionall as specified and directed.

Dismantling RCC post of any section, including taking out embedded portion and making good disturbed ground; posts embedded in natural ground including removing debris/rubbish materials off the site out side MoD land all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, (each line wire to be measured) all as specified and directed.

S&F in repairs galvanised, concertina coil of 610 mm dia made of 0.5 mm thick 19 mm wide strip and 2.59 mm dia high tensile wire 125 Nos of clips having 50 Nos of circle and covering 6 running metre and 5 clips per spiral using a center core of high tensile wire around which a tape of rezor sharp barbes machine crimped all as approved and directed

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface to match with existing all as specified and directed.

M&L PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete including sub base of floors all as specified and directed.

S&F in repairs framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel')

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire all as specified and directed.

Supply only chain link mild steel galvanized fencing of any type and size all as specified and directed.

M&L 15 mm thick ready mix plaster in one layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integrel water proofing compound all as specified and directed.

Demolition of brick work built in cement mortar and precast concrete articles including removing debris out side MoD land all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean raddius built in CM 1:6 all as specified and directed.

All as item N0 13 above but expect brick

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MoD land all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work all as specified and directed.

Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F in repairs for ornamental and intricate design framed work of mild steel conforming to Fe-290 (Gde E-165) as in doors or gates including cutting, bending in required shape & design, welding etc framed & hung including pintle hinges, stops. Hand made sliding bolts all as specified and directed.

M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as per item No 19 here in before but two coats of synthetic enamel paint.

S&f in repairs precast RCC jalli & pillars with cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate), thickness of RCC jalli 35 mm (measured solid) including all mouldings & frame, set in cement mortar 1:4 to precast pillars grooves and including reinforcement of 4mm dia annealed wire @ 100 mm c/c spacing on both side alongwith pillars decorative round dome type on top of size 75 x 75 mm with reinforcement 4 mm dia annealed wire 4 Nos with stirrups 4 mm dia @ 150 mm c/c spacing and one number 8 mm dia TMT bar at centre all as specified and directed.

All as per item No. 22 above but except pillars.

S&F in repair Aluminium composite panel sheet 3mm thick PVCF wooden or plain finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed as approved sample kept in GE Office.

M&L in repairs Best quality granite (of any type) tiles 18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over 15 mm thick bedding layer of morter in CM (1:6) all as specified and directed.

Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing all as specified and directed.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish all as specified and directed.

M&L exterior wall tiles 6 to 8 mm thick area n exe 0.06 sqm each tiles, set & jointed in cement slurry and pointed in coloured cement to match the shade of tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed. Make – Kajriya/Johnson (Endura) or equivalent as approved.

M&L for first and premium quality of vetrified coloured marble finished digital tiles 1200 mm x 600 mm x 9 mm to 10 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / vermora, Sample as approved By GE.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and and applying one coats of weather proof acrylic exterior paint (100% Acrylic) (Apex Ultima protek, Make : Asian Paints) through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and and applying two coats of weather proof acrylic exterior paint (100% Acrylic) (Apex Ultima protek, Make : Asian Paints) through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE.

M&L for preparing new surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE

S&F in repairs stainless steel grade 304 (square/ round / rectangular ) of suitable gauge as in gaurd bars / railing /frame work including all fixing arrangement all as specified and directed.

S&F in repair stainless steel sheet made of 1 mm thick 304 grade letters with seemless welding rubbed, polished and edges made smooth with necessary fixing devices all as specified and directed

S&F in repair stainless steel letters 225 mm height and 32 mm depth made of 1 mm thick stainless steel sheet 304 grade letters with seemless welding rubbed, polished and edges made smooth with necessary fixing devices all as specified and directed

M&L heavy duty outdoor vitrified tiles dark or light shade 10-12 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm and not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria /Euro, approved sample as kept in GE Office.

D.S. Construction

ASHOK CONSTRUCTION

SHRI SAI ENTERPRISES

SHREE JAGDISH FURNITURE CO.

Nilesh Construction

Frends Enterprises

Bright Construction Co

Unitech Enterprises

M/s Qureshi Construction Co

Bidder Name

Unitech Enterprises

Frends Enterprises

Nilesh Construction

ASHOK CONSTRUCTION

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

D.S. Construction

M/s Qureshi Construction Co

Bright Construction Co

SHREE JAGDISH FURNITURE CO.