Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
Closing Date
13 Oct 2026, 10:30 amDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
78
1 condition
Supply to be as per tender specification.
18 conditions
i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender. (ii) The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date quoted anywhere else should be ignored. (iii) (a) Regarding MSE purchase preference firms, please refer clause 15.0 part B of Southern Railway tender conditions available under the link Public Documents->Stores/Supply. (b) Goods and service Tax: Please refer part A Para 14.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (c) Preference to make in India Please refer part B Para 16.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (d) Tenderers are advised to refer instructions to tenders (Part A) and Tender conditions (Part B) for other terms and conditions available under the link Public Document -> Stores/Supply. (iv) Procurement of the item is restricted to Class-I Local suppliers with minimum local content of 50% (Class-I Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020) only and the vendors who do not qualify to be "Class-I Local suppliers" (i.e., "Non-Local suppliers" or "Class-II Local suppliers" with local content less than 50%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Class-I Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. Please enter the percentage of local content in the material being offered. Kindly enter 0 (Zero ) for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. (v) Tenderers shall confirm the following declaration failing which the offer is likely to be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India.I certify that this bidder is not from such a country or,if from such a country,has been registered with the Competent Authority.I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered.Where applicable,evidence of valid registration by the Competent Authority shall be attached."
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) Offer validity should be minimum 60 days. (ii) Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. (iii) Tenderer should mention GST No of their firm and also HSN Code of this Item is 8607.
1 condition
I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other sister concerns or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.
1 location across Tamil Nadu · 240 Numbers total
Flash back arrestor (Dry type)
78266578~SR
78266578
Limited - Indigenous
Goods
Tamil Nadu
₹0
Exempted
1 Oct 2026
1 Oct 2026
4 items · 240 Numbers total
Flash back arrestor (Dry type) for Regulator End of Oxygen lines to prevent flash backs in Ox y fuel system conforming to EN 730 / ISO 5175-1 / IS 11006 standards with flame arrestor (FA) and non ret urn valve (NRV) and thermal cut off valve (TV) working pressure:15 Bar. End connections G 3/8" RH to EN 5 60 / ISO 3253 standards. Make: MESSER / ESAB / GCE / WELDSTAR / ADOR/WITT. NOTE: 1) Offers of OEMs o r their authorized dealers enclosing valid authorized dealership certificate only will be considered. 2) The su ppliers shall send test certificate from govt. authorized test house. In case of international brand, the test c ertificate from reputed institute like BAM, Germany is mandatory. 3) The suppliers should have equipments for testing of flash back arrestors and calibration. The purchaser has the right to inspect these facilities. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/WAGON/SHOP/PWP, SR | Tamil Nadu | 60.00 Numbers |
| Total | 60 Numbers | |
Flash back arrestor (Dry type) for Regulator End of Acetylene/LPG lines to prevent flash backs in oxy fuel system conforming to EN 730 / ISO 5175-1/ IS 11006 standards with flame arrestor (FA) and non return valve (NRV) and thermal cut off valve (TV) working Pressure: 1.5 Bar for Acetylene/5.0 Bar for LPG. E nd connections G 3/8" LH to EN 560 / ISO 3253 standards. Make: MESSER / ESAB / GCE / WELDSTAR / ADOR /WITT. NOTE: 1) Offers of OEMs or their authorized dealers enclosing valid authorized dealership certificate only will be considered. 2) The suppliers shall send test certificate from govt. authorized test house. In cas e of international brand, the test certificate from reputed institute like BAM, Germany is mandatory. 3) The suppliers should have equipments for testing of flash back arrestors and calibration. The purchaser has the right to inspect these facilities. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/WAGON/SHOP/PWP, SR | Tamil Nadu | 60.00 Numbers |
| Total | 60 Numbers | |
Flash back arrestor (Dry type) for Torch end of Oxygen lines to prevent flash backs in Oxy fue l system conforming to EN 730 / ISO 5175-1 / IS 11006 standards with flame arrestor (FA) and non-return v alve (NRV) working pressure: 15 Bar. End Connections G3/8" RH to EN 560/ISO 3253 standards. Make: MESS ER / ESAB / GCE / WELDSTAR / ADOR/WITT. NOTE: 1) Offers of OEMs or their authorized dealers enclosing v alid authorized dealership certificate only will be considered. 2) The suppliers shall send test certificate fro m govt. authorized test house. In case of international brand, the test certificate from reputed institute like BAM, Germany is mandatory. 3) The suppliers should have equipments for testing of flash back arrestors a nd calibration. The purchaser has the right to inspect these facilities. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/WAGON/SHOP/PWP, SR | Tamil Nadu | 60.00 Numbers |
| Total | 60 Numbers | |
Flash back arrestor (Dry type) for Torch end of acetylene/LPG lines to prevent flash backs in o xy fuel system conforming to EN 73 / ISO 5175-1 / IS 11006 standards with flame arrestor (FA) and non ret urn valve (NRV) working pressure: 1.5 Bar for acetylene/5.0 Bar for LPG. End connections G 3/8" LH to EN 5 60 / ISO 3253 standards. Make: MESSER / ESAB / GCE / WELDSTAR / ADOR/WITT. NOTE: 1) Offers of OEMs o r their authorized dealers enclosing valid authorized dealership certificate only will be considered. 2) The su ppliers shall send test certificate from govt. authorized test house. In case of international brand, the test c ertificate from reputed institute like BAM, Germany is mandatory. 3) The suppliers should have equipments for testing of flash back arrestors and calibration. The purchaser has the right to inspect these facilities. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/WAGON/SHOP/PWP, SR | Tamil Nadu | 60.00 Numbers |
| Total | 60 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .