Provn of Certain sanctioned work at AGE B/R Beas under GE Kapurthala.

Amount

Surface excavation not exceeding 30cm deep and averging 15cm deep in soft/loose soil complete all as specified and as directed by Engr-in-charge.

Excavation over areas not exceeding 1.50m deep and getting out in soft/loose soil complete all as specified and as directed by Engr-in-charge.

All as per item No 2 above but depth exceeding 1.50 m and but not exceeding 3.00 complete all as specified and as directed by Engr-in-charge.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth and area not exceeding 10 sqm on plan for foundation/foundation of ples/stays/laying of cables etc and getting out in soft / loose soil complete all as specified and as directed by Engr-in-charge.

Spreading, leving, watering and well ramming in layers not exceeding 25cm for soft/loose soil complete all as specified and as directed by Engr-in-charge.

M&L for hardcore of broken brick of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge.

M&L for hardcore of broken stone or boulders of guage exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface etc complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:4:8, type D2, (using 40mm graded stone aggregates) in foundations, filling and mass concrete etc complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:3:6, type C2, (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete etc complete all as specified and as directed by Engr-in-charge.

M&L for 75mm thick plain cement concrete 1:2:4 type C2, (20mm graded stone aggregate) in sub base of floor complete all as specified and as directed by Engr-in-charge.

M&L for 150 mm thick plain cement concrete 1:3:6 as in floor Type C2, (40mm graded stone aggregate) complete all as specified and as directed by Engr-in-charge.

M&L for Brick work with sub class 'B' brick straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' brick, straight or curved on plan to any radious in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engr-in-charge.

M&L for 25mm thick damp proof course to horizontal or vertical surfaces including necessary form work with Cement concrete type B0, 1:2:4, and applying evenly a coat of hot blown bitumen at the rate of 1.5Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm and laying a layer of polythene film of 50 micron thick, laid on a coat of bitumen primer @0.30 to 0.50 kg per sqm complete all as specified and as directed by Engr-in-charge.

M&L for formwork to sides and sofits of floor or roof beam, girders, lintel, cantilever, shelves including supports overhangs, opening of concrete walls, side of RCC/PCC band and lintel in walls, horizontal or sloping and similar work complete all as specified and as directed by Engr-in-charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

All as per item No 17 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed by Engr-in-charge.

M&L for RCC (1:2:4) nominal mix Type B-1 using 20mm graded stone aggregates as in walls, beams, floor, roofs, landing, balconies, canopies, deck slabs and as in shelves etc complete all as specified and as directed by Engr-in-charge.

M&L for plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregates) as in drain bottom benching, parapets walls, bed block, copings, cills, steps etc including weathering, slightly rounded ot chamfered angles and throating, as directed including necessary form work complete all as specified and directed by Engr-in-Charge.

S&F Roof truss framed works as in purlins crane gantries rails and fastening and heavy bracket framing Beam (of tee, Angle, pipe of flat section, base plate etc) including distance pieces complete all as specified and as directed by Engr-in-charge.

S&F steel tubular work as in purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engr-in-charge.

S&F rolled mild steel Fe 410-W (Gde-E-250) qualiy-A in Joist, channel, angle, tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.

S&F, Pre-painted galvalume aluminum zinc coating GI based corrugated Steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, etc. fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls finished even and fair complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls finished even and smooth complete all as specified and as directed by Engr-in-charge.

M&L for three coats of white wash on walls including preparation of newly plastered surface of wall complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on plastered surfaces of walls complete all as specified and as directed by Engr-in-charge.

M&L for PCC 75mm thick 1:3:6 type C-2 using 20mm graded crushed stone aggregate as in plinth protection complete all as specified and as directed by Engr-in-charge.

M&L PCC 1:2:4 Type B-1 (20mm graded stone aggregate) as in kerb stone fair faces, includign chamfers, weatherings, throating etc including necessary formwork complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick PCC 1:2:4 type B-1 with 20mm graded stone aggregate as in flooring finished even and rough to receive the topping layer complete all as specified and as directed by Engr-in-charge.

M&L for Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

M&L for coloured Non Skid Ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and joined in neat cement slurry and pointed in white or coloured cement to match and shade of tile laid over 10mm thick screed bed in cement mortar 1:4 set and joined in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed by Engr-in-charge.

M&L for coloured glazed ceramic tiles in vertical surface 450X300X7mm thick laid over 10mm thick screed bed in cement mortar 1:4, set and joined in neat cement slurry and pointed in white or colour cement to match the shade of tile complete all as specified and as directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 18-20 mm thick over 25mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge.

M&L for Kota stone slab of 18-20mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and as directed by Engr-in-Charge.

M&L for PCC, 1:3:6 of thickness 100mm type D2, using 40mm graded stone aggregate as in sub base of floors for laying floor finishes complete all as specified and as directed by Engr-in-Charge.

M&L for Screed bed or bedding layer of mortar 20 mm thick cement mortar (1:6) for laying floor finish complete all as specified and as directed by Engr-in-Charge.

M&L for chequered cement concrete tiles 20cmx20cmx 25mm thick set jointed and pointed in neat cement slurry as in floors with grey cement and pigment complete all as specified and as directed by Engr-in-Charge.

M&L for sand filling under floors or as in foundations including watering and consolidation complete all as specified and as directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60mm thickness of M-35 grade with grey cement and no pigment complete all as specified and as directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 80mm thickness of M-40 grade with grey cement and no pigment complete all as specified and as directed by Engr-in-charge.

M&L for ceiling using 9mm thick gypsum based ceiling tiles with weather resistance face on back side and vinyl finish including framework on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note : Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, single rebated comprises gauzed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window including following fitting welded to frame shutter : (a) Mild Steel Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 20mm x 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note : Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squre not exceeding 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

Supply and fixing solid PVC door frame factory made of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specifications all as per SSR Part-I as specified and directed by Engineer-In-Charge

Supply and fixing factory made solid panel PVC moulded door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing including fittings all as specified and directed by Engineer-in-Charge

S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

S&F for 40mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both face complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed by Engr-in-Charge.

M&L for framed work as in doors or gates and chowkhats of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed by Engr-in-Charge.

S&F 100mm size stainless steel butt hinges medium weight complete all as specified and as directed by Engr-in-Charge.

S&F aluminium alloy anodised sliding door bolt with hasp and staple bolt type and fixing clip of sheet cast or extruded sections and fixing bolt and sliding bolt of extruted section or cast aluminum alloy and fix length of bolt 250mm complete all as specified and as directed by Engr-in-Charge.

S&F aluminium handle cast type anodised of size 125mm complete all as specified and as directed by Engr-in-Charge.

S&F aluminium alloy anodized barrel tower bolt of extruted section and fix length of tower bolt 150mm complete all as specified and as directed by Engr-in-Charge.

S&F for 250mm length of mild steel sliding door bolts, plates type stove enemelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engr-in-Charge.

S&F for 150mm size of mild steel pressed handles oval type stove enamelled black complete all as specified and directed by Engr-in-Charge.

S&F Steel Ventilator 1.25mm thick Box Type fixed type prepared for fixing of gauzed and glass ( primer coated) ERW hollow P section of size 60mm x 25mm including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each vent ) including following fitting welded to frame shutter :- (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per vent (b) Handles of Z Sec 20mm x 100mm long (c) Stay (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings and complete all as specified and as directed by Engr-in-Charge. Note : Wire mesh/glass pane and painting shall be measured and paid separately under appropriate items of schedule.

S&F harrison rails, mild steel, chromium plated with fixing bracket, stops and roller etc complete all as specified and as directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and as directed by Engr-in-Charge.

S&F vitreous China squatting pan ‘Orissa’ pattern of size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engr-in-Charge.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, jet spray, etc complete all as specified and as directed by Engr-in-Charge.

S&F health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixing in position complete all as specified and as directed by Engr-in-Charge.

S&F toilet paper holder for vitrious china fixed to wall with CP brass screw complete all as specified and as directed by Engr-in-Charge.

S&F PVC low level flushing cistern of capacity 10 Ltr including flush pipe, overflow pipe and incls fittings pipes complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous China urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engr-in-Charge.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms) complete all as specified and as directed by Engr-in-Charge.

M&L for Granite tiles 20mm thick machine cut of approved type and pattern bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engr-in-Charge.

S&F 20mm thick white marble slab, machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing, rounding to edges of stone slabs, fixed in wall as in urinal partition complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous China wash basin, white, flat back of size 550X400mm including brackets fitted at top of the granite shelf complete all as specified and as directed by Engr-in-Charge.

S&F 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) with PVC waste pipe for wash hand basin complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel soap dish any type fix to plug with chromium plated brass screwed complete all as specified and as directed by Engr-in-Charge.

S&F towel rail 600mm long of stainless steel fix with chromium plated brass screwed and cleats complete all as specified and as directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nut of length 450mm etc complete all as specified and as directed by Engr-in-Charge.

S&F stop valve/angle valve cast copper alloy bore dia of pipe 15mm screwed down high pressure with crutch or buttrefly handle screwed both ends for iron pipe and fixed of fancy type brass chromium plated complete all as specified and as directed by Engr-in-Charge.

S&F stop valve/angle valve cast copper alloy bore dia of pipe 15mm screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed of fancy type brass chromium plated with long shank and cup (concealed type) etc complete all as specified and as directed by Engr-in-Charge.

M&L for chromium plated long body bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe and fix to 15 mm bore pipe complete all as specified and as directed by Engr-in-Charge.

S&F 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts complete all as specified and as directed by Engr-in-Charge.

S&F shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia complete all as specified and as directed by Engr-in-Charge.

Supply and fixing GI tubing 15mm dia medium grade galvanized with all fitting complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing GI tubing 20mm dia medium grade galvanized with all fitting complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Cutting holes into or through brick walls superfacial area n.exc. 150 sqcm bult in cement mortar or cement lime mortar and making good in cm 1:3 or cement concrete 1:2:4 type B-1 including matching the surfaces with the existing surface finishes complete all as specified and as directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring joint laid in trenches or in floor complete all as specified and as directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bend any radius complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) floor trap of 110 mm outlet dia plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-Charge.

S&F CP garting 100mm dia with waste hole complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) P trap 110/110mm bore complete all as specified and as directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction (single T) equal or unequal complete all as specified and as directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) Bends and radius of 75mm bore complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) junction single, (Single T) equal or unequal of 75m borecomplete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) 75mm floor trap, plain with grating, including jointing with cement solvent complete all as specified and as directed by Engr-in-Charge.

Supply and fixing rotational moulded polythelene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-1 of 1000 ltrs capacity including fittings complete all as specified and directed by Engineer-in-Charge

S&F 20mm brass ball valves, high pressure with polythene float and flynut complete all as specified and as directed by Engr-in-Charge.

S&F gun metal globe or gate metal with iron wheel head screwed both ends for iron pipe and fixed to steel or union 20 mm bore dia of pipe complete all as specified and as directed by Engr-in-Charge.

S&F salt glazed stone ware drain pipes of 150mm bore, Class 'A', ISI marked, complete all as specified and as directed by Engr-in-Charge.

Extra for forming fair finished drain to channel inner girth 30 cms in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and as directed by Engr-in-Charge.

Material and labour for concrete bed to drain pipes 200mm bore in cement concrete (1:3:6) type C-2 (using 20mm graded stone aggregate) including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and as directed by Engr-in-Charge.

S&F for reinforced concrete pipe of 200mm dia class NP-2 for carriying sewage and sludge water, laid and jointed complete with collars complete all as specified and as directed by Engr-in-Charge.

M&L for concrete bed (cement concrete 1:4:8 Type D2) to drain pipes including packing under and haunching against the sides of pipes after they are laid and test in complete all as specified and as directed Engr-in-Charge.

Supplying, laying, connecting, jointing and testing centrifugally cast (spun) iron pressure pipes of 100mm bore, with spigot and socket ends, Class LA, suitable for CI pipe of 100mm bore, complete all as specified and directed by Engr-in-Charge.

M&L for loose filling with broken bricks of gauge 80 to 150mm in soakage pits, soakage wells complete all as specified and directed by Engr-in-Charge.

Excavation in post holes soft/loose soil (or similar) each not exceed 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth round in layers not exceeding 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft /loose soil complete all as specified and directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above from the starting point complete all as specified and directed by Engr-in-Charge.

M & L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS) 1100 Volts grade cable, controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS) 1100 Volts grade unsheathed PVC insulated continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and as directed by Engr-in-Charge.

(a) One light point controlled by one, one way switch

(b) one fan point controll by one way switch

(c) One socket outlet 3 Pin, 5 Amp on independent board

(d) One socket outlet 3 Pin, 5 Amp on same board.

All as per item No 111 here in before but 2.5 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and as directed by Engr-in-Charge.

All as per item No 111 here in before but 4 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and as directed by Engr-in-Charge.

Supply and fix Sheet metal enclusoure single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volt complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 6 Amp complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 15 Amp complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and as directed by Engr-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge.

S & F PVC/Polycarbonate Lamp holder with back plate suitable for batten fittings type with back plate suitable for batten fittings complete all as specified and as directed by Engr-in-Charge.

Supply and fix LED decorative box batten type light fitting of 20 watt with LED Tube rod 4 feet alongwith all accessories, pre-wired fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-charge.

S&F LED mirror light fitting 2 ft in 10 watt alongwith all accessories, pre-wired fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-charge.

Supply and fixing LED Security light fitting 35 watt Pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection complete fitting including Bracket made out of GI pipe of suitable size including clamp, nut, bolt etc all as specified and directed by Engineer-in-Charge. Note : Contractor shall provide 2 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion.

Supply and fix LED Bulk head fitting 10 watt highly cost effective compact ultra low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 65 protection watt complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-Charge.

Supply and fixing TP&N Vertical DB 8 way, MCCB as Incomer with Bus Bars, Neutral Links, Blanking Plates complete With MCCB of capacity 63 to 100 Amp complete all as specified and as directed by Engr-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-Charge.

(i) SP 6 to 32 AMP

(ii) SPN 25 to 32 Amp

(iii) SP 40 AMP

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed by Engr-in-Charge.

Supply and fixing water heater storage type electric of capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces complete all as specified and as directed by Engr-in-Charge.

Supply and fix exhaust fan, made of sturdy engineering plastic body AC single Phase 230V of size 300 mm sweep with, blades and frame and louvers cutting of the holes in existing wall and making good the surfaces complete all as specified and as directed by Engr-in-Charge.

S&F PVC connection cold water pipe 18" long of 15mm dia with brass jem nut and wahser, both side complete all as specified and as directed by Engr-in-Charge.

All as per ser item No 130 here in before but hot water pipe made of chromium plated brass flexible tubing complete all as specified and as directed by Engr-in-Charge.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole complete all as specified and as directed by Engr-in-Charge.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and as directed by Engr-in-Charge. (Note : For payment 18cm thickness shall be considered)

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and as directed by Engr-in-Charge.

Supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 4 way single pole and neutral link complete all as specified and as directed by Engr-in-Charge.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole complete all as specified and as directed by Engr-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge.

Supply, Install, commission and test water cooler of fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of size 40/80 Ltrs complete all as specified and directed by the complete all as specified and as directed by Engr-in-Charge.

Supply and fix wall mounted voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input varaiation between 170 to 285 V, with output voltage stabilzed at 230 V with accuracy + 2.5% and of capacity 3 KVA complete all as specified and as directed by Engr-in-Charge.

Supply and fix factory made sheet metal enclosure distribution board class IP-40 with 200 A rated copper bus bar 240 V, 2 ways single pole and neutral link complete all as specified and as directed by Engr-in-Charge.

Supply and fixing GI pipe medium grade with all fitting laid in trenches of size 15 mm bore complete all as specified and as directed by Engr-in-Charge.

Supply and fixing gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of size 15 mm dia complete all as specified and as directed by Engr-in-Charge.

SUNRISE ENGINEERS AND CONTRACTOR (BID ID -3163614)