Bolster for Press Tool

Bolster for Press Tool Size 1500 L X 800W X 100MM T Tolerance +-2mm Material Grey Cast Iron to spec IS 210 of 1993 Grade FG-200 The casting shall be sound clean and free from porosity Blow holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand and Slag inclusions and other harmful Defects edges of casting should be right angle to each other Any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL LAB with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Press Tool size 1000 L X 200W X 75 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out. Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for press Tool size 1200 L X 700 W X 100MM T Tolerance +-2mm, Material grey cast iron to spec IS 210 of 1993 Grade FG-200, the casting shall be sound, clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other ,any welding / repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Press Tool Size 800 L Z 800 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tear, cold shuts Distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Pres Tool Size 1500 L X 1000 W X 100MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Press Tool Size 1200 L X 1000 W X 100MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Press Toll Size 400 L X400W X 75MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Pres Tool Size 400 L X 350 W X 50 MM T Tolerance +-2mm, Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Press Tool Size 1200L X 600 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.

Bolster for Press Tool Size 1000 L X 800 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.