REPAIR MAINT OF B/R AND E/M SERVICES AT WSA AT AF STN GORAKHPUR

Amount

Taking down cement plaster of any description including racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed at site.

M&L for rendering 15mm thick in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in coping, fixing MS post at top of wall, roof Krebs or mud stops, rounded or chamfered on edge including necessary form work complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed at site.

Dismantling brick or brick tiles laid bedded and pointed in any type of mortar etc complete all as specified and directed.

M & L Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Labour only for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete but except brick ( only serviceable Brick obtained from dismantling ) all as specified and directed.

M&L for preparation of old plastered surfaces of walls by scraping and removal of existing treatment and applying two coats of exterior emulsion in camouflage pattern (Two or more colour combination) complete all as specified.

M&L for preparation of new plastered suefaces of walls and applying two coats of exterior emulsion in camouflage pattern (Two or more colour combination) over a coat of priming surfaces with alkalies complete all as spcified.

M&L for preparing old decorated plastered surfaces of walls, pillasters, cornices etc. and applying one coat of exterior emulsion paint complete all as specified and directed.

M&L for preparing New decorated plastered surfaces of walls, pillasters, cornices etc. and applying one coat of exterior emulsion paint complete all as specified and directed.

Dismantling of PVC Sheet/ linoleum sheet in floor of any description complete all as specified and directed at site.

S&F 4.50 mm thick linoleum sheet, plain/ coloured, laid dry in floors sealed down with an approved adhesive including stretching, cutting and fitting all as specified and directed.

M&L for framed/unframed work such as doors or gates angle or other section with gusset plate,. Rails braces etc. Complete drilled for fixing of steel sheeting or other covering, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , raining rails and guides) and handles also fastening and fixing complete all as Specified & directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame complete with all fitting and fixture exceeding 1.5 Sqm but not exceeding 4 sqm complete all as specified and directed.

S&F For Pressed steel frames 125X60 mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate, etc., complete, as specified and direted.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkhats complete all as specified .

M & L for solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prlem PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelm sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing.

S & F factory made solid PVC molded door shutters (with particle board core ) 28 to 30 mm thick (stiles ) with 2,4 or 6 raised panels design with 2 mm thick molded PVC sheet on front face and 2 mm plain colour PVC sheet on back faces , complete as specified and shown in sketch at SI page No 161 of SSR Pt-II (rates) and fixed in Chowkhats frame.

S&F 200 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed at site.

S&F 150mm long aluminum handles cast type anodized fixed complete all as specified and directed at site.

S&F 100mm long butt hings medium weight cold rolled mild steel and fixed complete all as specified and directed at site.

S&F 250 mm long aluminiunm sliding door bolt with hasp and staple bolt type anf fixing clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed at site.

Demolition of PCC floor ,plinth and paving not exceeding 15 cm thickness below or above ground level .complete all as specified and directed at site.

M&L for 150mm thick PCC 1:1.5:3 flooring using 20mm graded stone aggregate including Use and waste of necessary form work and to divide the area in panels Finish even and fair without using extra cement and finish the top layer with broom complete.

M&L PCC 1:3:6 type C-1 as in filling in holes of hold fasts.complete all as specified and directed at site.

M&L for Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100 mm thick as in hardstanding /pavement including finshing the surface fair and even without using extra cement complete all as specified and directed at site.

S&F in repair machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment.complete all as specified and directed at site.

M&L for sand filling under floors or in foundation including watering & Consolidation.complete all as specified and directed at site.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embeded in cement concrete complete all as specified and directed at site.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed at site.

Taking down chain link fencing fixed to any type of standard rails, straining bolts etc complete all as specified and directed.

M&L PCC 1:3:6 type C2 40mm graded stone aggregate as in fixing of fencing post and mass complete all as specified and directed at site.

S &F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets incl all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type of minimum dia 3.15 mm or above as directed. (Weight of chain link shall be decided through a BOO)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc.complete all as specified and directed at site.

M&L for mild steel round bar 10 to 12mm dia confirming Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in stiffeners to chain link fencing etc all as specified and directed.

M&L for two coat synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width or girth incl preparation complete all as specified

Cutting holes of size exc 100 Sqcm but n exc 250 Sqcm into or through cement concrete slabs, chajjas, etc. reinforced or otherwise for fixing of angle frame work for concertina coil and refilling the hole with PCC 1:2:4 Type B-0 (using 12.5mm aggregate) complete all as specified and directed.

Dismantling of concertina coil 600mm dia any shape including razor wire of six linc etc all as specified and directed. Note :- Concertina coil and six link razor wire shall be measured as one Rm

S&F 610mm dia punched tap concertina coil (effective dia 550mm at strength length of coil 10.0 mtr) with two handle and spike at both end of coil dovetailed clips (18SWG) including razor wire 07 Nos, 6.0 mtr length of each wire medium size barbed length 20mm width 14mm including 51 pin, 128 Nos clips in each coil including 230gm/Sqm zinc coating of core wire complete all as specified and directed.

Fixing only existing serveciable concertina coil and razor blade complete all as specified and diected

Dismantling Galvanized, 2 strand, steel barbed wire of any description complete all as specified and diected

M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairs to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line of wire to be measured).

Removal of down filled earth from drain and cleaning the bottom and side drain from mud vegetation and preapared the surface for smooth flow of water etc and removing the roots ,vegitation and mud up to 50 mtr from the periphery of the area. complete all as specified and diected

Demolition of cement concrete (reinforced) Concrete of any description and in any position not otherwise specifically provided for including reinforcemen tto cut as required to facilitate demolition complete all as specified and directed at site.

M&L plain cement concrete (1:2:4) type B-2 using40mm graded stone aggregate in surface channels and drains complete all as specified and directed at site.

M&L bricks, sub class B, laid flat,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete all as specified

Labour only for bricks, sub class B, laid flat,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete but except bricks ( only serviceable Brick obtained from dismantling complete all as specified and directed at site.

M&L bricks, sub class B, laid on edge,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete all as specified and directed at site.

Labour only for brick work , sub class B, laid on edge,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete but except bricks ( only serviceable Brick obtained from dismantling) complete all as specified and directed at site.

Raking out joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc built in cement mortar complete all as directed

M&L for Keyed pointing to brick walls in cement sand mortar in 1:4 compete all as directed

Extra for forming fair finished drain or channel 55 CM inner girth in cement concrete using extra cement including forms ,moulds,mitred /Stopped etc complete all as specified & directed.

M&L providing pre-cast reinforced cement concrete with RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab of drains, manhole covers set in cement mortar 1:4 etc with necessary use and waste of form work complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L mild steel TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Taking down 15 mm bore water tubing and connection including cleaning for re-fixing or removing to store.

Taking down 20 mm bore water tubing and connection including cleaning for re-fixing or removing to store complete all as specified and directed at site.

Supply & Laying of CPVC pipes of outer dia 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply & Laying of CPVC pipes of outer dia 25mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Taking down old unserviceable light fitting conventional type from wall/ceiling or any position and making good the disturbed surface all as Specified & directed.

S&F 10 W LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white,energy saving complete with its all accessories all internally prewired and including connecting it with twin core twisted flexible copper conductor cable of suitable size complete all as specified & directed. Make : Havells Cat part No ENDURA LINE ARNE OBS10WLED865SPCWH or equivalent in Bajaj/CG.

S&F 20 W LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white,energy saving complete with its all accessories all internally prewired and including connecting it with twin core twisted flexible copper conductor cable of suitable size complete all as specified & directed. Make : Havells Cat part No ENDURA LINE ARNE OBS10WLED865SPCWH or equivalent in Bajaj/CG

M/S DEEKSHA CONSTRUCTION ELECTRICAL REFREGERATION & WORKS

M/S ARORA CONSTRUCTION

M/s Pandey Trading Company

A K CONSTRUCTIONS

M/s RAAJSHREE INFRA

M/s Vivek Traders

M/S NITISH ASSOCIATES

M/S APARNA ASSOCIATES

M/S GUPTA TRADERS

M/S B.P. CONSTRUCTION