PROVN OF TOILET BLOCK, BATHROOM, URNIAL POINT FOR NO 01 RECT COY AND TOILET BLOCK AND URINAL POINT AT SALARIA STADIUM 14 GTC SUBATHU UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Rough Excavation exc 1.5m deep and getting out in hard and dense soil complete all specified and directed.

Surface excavation n exe 30 cm deep and averaging 15cm deep and getting out in hard and dense soil.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base ,foundation, filling and mass concrete complete all specified and directed.

M&L for hard core of gauge n. exc 63mm of broken stone or boulders , deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm.

Removing excavated material exc 100 mtr and n exc 150 mtr depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified.

Reinforced cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate, as in Beams, lintels etc.; complete all as specified.

Form work to sides and soffits of floor or roof beams,lintels etc fair finished surfaces complete all as specified.

Mild steel TMT bars 8 mm dia and over cut to length bent to shape required including cranking bendings spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified.

Mid steel TMT bars,5mm dia and over 10 mm dia in stirrups and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L for 50mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement etc complete all as specified.

M & L for PCC 1:3:6 Type C2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed .

S&F rolled mild steel Fe-410-W(Gde-E-250)quality-B in roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall fixed with self tapping screws complete with ridge etc.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similarsmall articles conforming to Fe-290 Gde-E-165.

M&L for brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all specified and directed.

M&L for brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:4 complete all specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in -Charge.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in -Charge.

M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper over chawk white putty to walls complete all as specified.

M&L for preparation to new plastered surfaces and applying two coats of cement base paint on walls

M&L PCC 100 mm thick type B-2 1:2:4 (40 mm graded stone aggregate) as in floor finished even and smooth with out using extra cement etc complete all as specified.

M&L for Non-skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing in existing opening including necessary hold fast and complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters with Particle board Core 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing as per SSR part II item No 8101 on page No 161 complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long butt hinges extruded aluminium alloy, complete all as specified & directed by Engineer-in-Charge

S&F 100 mm long extruded aluminium alloy, handles, fabricated type, anodized, complete all as specified & directed by Engr-in-charge.

S&F 150mm aluminium anodised tower bolts of extruded section, complete all as specified & directed by Engr-in-charge.

S &F Powder Coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S &F Powder Coated Anodised aluminium window and ventilator shutters, side hung type without sash , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-1 100 m long(2 Nos) suitable handle(1 Nos).complete al as specified.

S&F Aluminium alloy wirecloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple etc complete all as specified.

M&L Two coats of synthetic enamel paint over a coat of Red oxide primer including preparation to new steel surfaces complete all as specified and directed.

Supply and fix vitreous China wash down water closet (squatt pan) orissa squatting pattern pan of size 580mm x440mm white with integral foot rests etc including P or S trap complete all as specified and directed.

S&F Vitreous china wash down water closet English ,white (including fixing bolts & flush pipe) complete in all respect all as specified.

S&F vitreous china urinal, half stall type white complete including fixing, bedded against wall in cement mortar 1:2 pointing around urinal back in cement all as specified and directed.

S&F vitreous china white urinal partition of size 310x700 mm fixed to wall with brass CP screws complete all as spd and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60 gms).

S&F vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm excluding supply of taps, but including waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fit nuts , flange end embedded in red lead cement and other end fixed, brackets including cutting for and pinning in ends of brackets or erecting stand , making connections to waste and supply pipes and complete all as specified.

S&F for PVC low level flushing cistern 10 Ltrs capacity with all internal accessories and fixed to wall including provision of PVC connection pipe 15mm bore with brass union and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC etc complete.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top with outer face white in colour) hoisted and fixed in position all as specified in SSR Part I.

Excavating in post holes in hard and dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in Post holes.

M&L for MS work as in staging, cover of water storage tank, conforming to Fe 290 Gde E 165 as diredcted by Engineer-in-Charge,complete all as specified.

M&L for welded steel wire fabric weight n exc 4 kg per sqm fixed to steel or wood members complete all as specified.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into pikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified.

S&F 125 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed,complete all as specified.

S&F 15mm dia GI pipes medium grade with all fittings and fixed complete to walls and ceilings or laid in floors

S&F 20mm dia GI pipes medium grade with all fittings and fixed complete to walls and ceilings or laid in floors

S&F 15mm dia bib taps fancy type chromium plated cast copper alloy with capstan heads , screwed down, screwed for iron pipe or for brass ferrule.

S & F CP fancy type Stop valves/Angle Valve 15mm bore, cast copper alloy screwed down high presure, with capstan handle, screwed both ends for iron pipe or for unions and fixed.

S & F CP fancy type, chromium plated with long shank and cup (concealed type) Stop valves/Angle Valve 15mm bore, screwed down high presure, with capstan handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15mm dia chromium plated fancy type pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe screwed both ends for iron pipe or for brass ferrule and fixed.

S&F PVC connection 15mm dia size with PTMT nuts of length 450mm.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms)

S&F 20mm dia stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union.

S&F 32mm dia of length 60cm PVC waste pipe complete all as specified .

S & F in repair 32mm bore Waste coupling of PTMT (half or full threaded) suitable for urinals & wash hand basin (Minimum weight 32mm-45gms).

S&F 75mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors.

S&F 75mm dia PVC(SWR) bends any radius.

S&F 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors.

S&F 75 mm dia PVC (SWR) junction single, (Single T) equal or unequal laid in floors and jointed with pvc pipe complete all as specified.

S&F 110mm dia PVC(SWR) bends any radius.

S&F 75mm dia PVC(SWR) vent cowl.

S&F 75mm PVC (SWR) floor traps, plain with 100mm PTMT grating with waste hole, including jointing with solvent cement .

S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges .

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws.

S&F chromium plated shower rose with or without swivel joints and size including fixing to steel pipe or unions mixing valve including three joints to steel pipes or union and plugging and screwing to walls.

M&L for 16 to 18 mm thick granite stone machine cut (table rubbed & polished) in one piece as in steps,jambs,pillars,windows cills,cooking platform and similar work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing including making hole in platform and screed bed for bedding 15 mm thick in cement mortar 1:4 ,complete all as specified.

M&L for Reinforced cement concerte type B-1 (1:2:4) 20 mm agg as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for basin.

M&L for Walling of random rubble, coursed well bonded, built in CM(1:4)as in retaining wall,parapet,steps complete all as specified & directed by Engineer in charge

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone agg as in coping to retaining walls/steps/parapet /base of railing post etc including necessary formwork and forming construction joint at 3.00m interval and expansion jpoint at 10 m interval etc complete all as specified.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slury in flors with grey cement and pigment including 20 mm thick screed bed or Bedding in CM 1:6 complete.

M & L for 100 mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate , as in sub base of floor complete all as specified and as directed

S&F of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). Complete all as specified and directed.

Toilet paper holderToilet paper holder with flat recessed type stainless steel Complete all as specified and directed fixed to walls with chromium plated (CP) brass screws complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified and as directed .

M&L for Salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked jointed with cement mortar, laid in trenches and tested complete all as specified and as directed by Engineer -In - Charge.

M&L for 150mm dia pipe salt glazed stone ware bends and taper bend all as specified

M&L for Plain cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides of pipes after the pipe are laid and tested for 150mm bore SGSW pipe complete all as specified and directed by Engineer-in-Charge.

M & L for Providing, precast cement concrete (1:2:4) Type B1 (20 mm graded aggregatein in cm 1:4 in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed by Engineer -In - Charge

M & L for TMT bar 6mm to 8mm dia cut to length, bent to shape required including cranking bending, spirally for hoping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed by Engineer -In - Charge.

M&L Cutting into existing manhole for connecting new drain, making good to pipes and rendering cutting out existing benching for and forming branch channel (½ round of ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150/200 mm bore pipe complete all as specified and as directed by Engineer -In - Charge.

Dewatering of septic tank and soakage well any size and cleaning by taking out mud/sludge from septic tanks and soakage wellof any depth, in foul conditions and confined places, getting out and removing the sludge to a distance exc 250 m and n.exc 500 m and deposited where directed in and including borrow pits and covering the borrow pits with 10 cms thick layer of soil complete all as specified and directed. Note:- Net contents of sludge shall be measured at the time of removal and paid. Quoted rate of tenderer is deemed to be inclusive of dewatering as required and nothing extra shall be admissible to the contractor on this account.

M&L point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl casing-n-caping medium grade with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated FRLS copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : (i)Switch/sockets shall be measured and paid for separately. contaractor provided wiring diagram board. (ii) 3 run measure as 1 run

One light /fan point controlled by one switch complete all as specified and directed.

One switch socket outlet 3 pin,5 Amp on the independent board complete all as specified and directed.

One switch socket outlet 3 pin,5 Amp on same board complete all as specified and directed.

All as per item No 90.00 here-in-before but with 1100 volts grade stranded FRLS copper conductor single core 2.5 Sqmm (Nominal area )single core flame retardant low smoke (FRLS) PVC insulated and unseathed cable ISI-694 marked TEC and FIA approved in and including PVC casing-n-caping. ISI marked with all accessories PVC junction boxes mild steel sunken boxes (terminal boxes) made out of 1.5 mm thick MS steel suitable for switches/ sockets with earth dolly duly painted both internally and externally with two coats of anti corrosive paint over a coat of red oxide primer covered with and including 3 mm thick plastic laminated sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper condutor 2.5 sqmm (nominal Area), 1100 volts grade single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed. Note : (i)Switch/sockets shall be measured and paid for separately. (ii) 3 run measure as 1 run.

S&F Lamp holder,PVC insulated body, with back plate suitable for batten fitting

M& L switch piano, flush type, single pole 1 way 6 Amp,ISI marked completeall as specified

S&F switch piano flush type, single pole 1 way 16 Amp

M& L socket 5 pin 6 Amp piano flush type,ISI marke.

S&F socket out let 2 in one 6 pin 6 & 16 Amp

S&F ceiling rose, 3 phase/ PVC/ polycorbonate,isolate bady

S & F LED bulb 10 watt.

S&F sleek LED mirror light with diffuser 10 W watt along with all accessories prewired including connecting with copper flexible cable of size 0.7 Sqmm 3 core and all as specified and directed

S & Fin replacement Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.

Supply in replacement aluminium extruded energy efficient 22W inverter batten with inbuilt Li ion battery for power backup of 2 to 3 hrs with SS & MsMS zinc plated and passivated hardwares, IP20 ingress protection, LM80 certified LED .

S &F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, SPN 6 way, 240 Volt (power db).

S & F MCB, 'B' curve SPN, 240 V, 32-40 Amp 240 volt breaking capacity 10 Ka.

S & F MCB 'B' curve single pole 6 to 32 Amp, 240 volt breaking capacity 10 kA.

Supply, laying, testing and commissioning of cable LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. Mm 2 core confirming to IS specification including taking out existing unserviceable cable complete all as specified and as directed.

Supply & Fixing exhaust fan, energy efficent metalic blades heavy duty turbo force of size 300 mm sweep, 900 rpm, AC, 230 volts complete with louvers, shutters, mounting on walls with holding down bolts, nuts, washers with cutting holes into or through stone/brick walls for fixing of 450 mm sweep exhaust fan including making good the cutting and matching the surface with existing surfaces and connection of flexible copper conductor cable three core ceiling rose to fan and testing complete all as specified.

M/s Parmod Kumar

M/S Lekh Ram Sharma and Sons

Vishal Builder

M/S CHOPRA & COMPANY

Arsh Builder

R. P. Suppliers and Construction Co.

R B TRADERS

M/S Trilok chand sharma

Rajesh Agencies