15 - Kasba Baraut ward no. 9 Asif ke makan se Firoz ke makan tak ve Ahsaan se makan se Virajpal Singh Rana ke makan tak CC sadak ve Saleem ke makan se ashok ke makan tak RCC nali nirman karya.

Contruction of granular sub- base by providing well graded material spreading in uniform layers with motor grader on prepared surface ,mixing by mix in place method with rotavtor at OMC,and compacting with smooth wheel roller to achieve the desired drnsity ,as per MORD,specification .401

Cc in (1:4:8) in nalla bed with 4cm gauge b/ballast cement c/sand in comp.position (s.i-281)

Rcc work in (1:1.5:3) mortar with approved stone grit cement c/sand in nalla wall and bed including shuttering deshuttering in comp position . (s.i-289)

Reinforcement and its bending but excluding its fixing and bending centring and shuttering including all material labour tools etcin comp position . (s.i-504)

Cement Concrete Pavement.construction of un - reinforcement dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other as per clause 1501.2.2 M 30 (Grade) coarse and fine aggregates conforming to is 383 maximum size of coarse aggregate not exceeding 25 mm mixed in a concrete mixer of not less than 0.2 cum capacity and opproriate weigh batcher using approved weigh batcher using mix design ,laid in approved fixed side formwork (steel channel laying and fixing of 125 micron thick polythen film wedges steel plates including leveling the formwork as per drawing) spreeding the concrete with shovels rakes compacted using needle screed and plate vibrators and finished in continuous opertion including provision of contraction and expansion construction joint applying debonding strips primer sealant dowel bars near approaches to bridge / culvert and construction joints admixture as approved curing of concrete slab for 14 days using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501

STEEL WORK WELDED IN BUILT UP SECTIONS / FRAMED WORK INCLUDING CUTTING HOISTING FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER USING STRUCTURAL STEEL ETC AS REQUIRED . IN GRADING FRAMES GUARD BAR LADDER RALLING BRACKETS GATES AND SIMILAR WORKS INcluding leaser cutting in complete/ possition in DSR 10.25 .2

s/fixing sign board at site in comp .position