SPECIAL REPAIRS TO BLDG NO T-07, T-08 AND T-43 (ORs BATHROOM CUM TOILET) AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

Dismantling asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, unframed work in any position complete all as specified and directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , unframed work in any position complete all as specified and directed.

Dismantling/ Taking down framed wooden trusses exceeding 4.00m span bu not exceeding 8.00 m span and removimg from site complete all as specified and directed.

Dismantling of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even without using extra cement,complete all as specified and directed.

M & L 10mm thick cement plastering in cement mortar 1:6 finishing even and fair without using extra cement complete all as specified and directed.

Cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, incl use and waste of all necessary form work complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Preparing new steel surfaces and applying two coats of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed.

M & L for preparation of new plastered surface or unplastered surfaces of walls and applying two coats of cement based paint over one coat of alkali resistant cement priming paint all as specified and directed by Engr-in-Charge.

M & L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specifie and directed

M & L for preparation of old plastered or unplastered surfaces of walls byapplying three coat of white wash complete all as specifie and directed

Taking down chokhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames with shutters of any description (without taking off shutters from the frame) n exc 1.5 sqm each and removing from site complete all as specified and directed.

Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.

Factory made Pressed steel frames, confirming to IS, having profile 125 x 60 mm made out of 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and fixing only 125 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge. Note: The Mild Steel butt hinges will be measured and paid separately as supply only under relevant item.

S & F 35mm thick plain framed (Factory made) pannelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm BWP commercial ply or 12mm thick vereered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003(Part-I) complete all as specified and directed.

S & F 35mm thick glazed and skelton shutters of 1st class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size complete all as specified and directed.

Mild steel barrel tower bolts 200 mm long , stove enamelled black, with bright bolt and fixed complete all as specified and directed.

Mild steel pressed handles oval type stove enamalled black 125mm size complete all as specified and directed.

Mild steel sliding door bolts, 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

MS butt hinges 100mm long cold rolled MS medium weight complete all as specified and as directed.

S & F M/S 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified and directed.

Taking up or down steel tubing 15 mm bore or connection, incl cleaning pipe for checking its serviceability for re-fixing or otherwise for removal from site or to store complete all as directed by Engineer-in-Charge.

Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing 20 mm bore or connection, incl cleaning pipe for checking its serviceability for re-fixing or otherwise for removal from site or to store complete all as directed by Engineer-in-Charge.

Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe fixed as in repairs complete all as specified.

Stop valve, cast copper alloy, screwed down, high pressure, with cutch or butterfly handle, screwed both ends for iron pipes or for union and fixed for 20mm bore as in repair complete all as specified

Stop cock fancy type, brass chromium plated with long shank and cup (concealed type) 15 mm bore fixed in repair complete all as specified

Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified

S&Fix in repair Rotational moulded polythene water storage tanks of capacity 1000 lit, hoisted and fixed in position including 20mm bore brass ball valve high pressure with polythene float and fly nut incl 32mm dia wash out with plug complete including dismantling of old water tank of any size or specification complete all as specified and directed.

450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality complete all as specified and directed.

PVC valveless, syphonic action type flushing cistern, low level 10 ltr capicity Dual Flush Mechanic incl, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified incl taking down any type of flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed by Engr-in-Charge.

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) , complete all as specified and as directed.

Vitreous china wash hand basin off white flat back size 550 x 400mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, cast iron brackets incl CP pillar Taps 15 mm bore and PCC 1:2:4 type B-I using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM 1:3 complete fixed as in repair, all as specified and directed.

Viterous china squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc fixed as in repair complete all as specified and fixed in repairs

Cast iron soil waste and vent pipe of bore 100mm centrifugally cast, ISI marked, in any length with or without ears with run lead joints laid in trenches or in floors fixed in repairs complete all as specified and directed.

Cast iron soil waste and vent pipe of bore 75mm centrifugally cast, ISI marked, in any length with or without ears with run lead joints laid in trenches or in floors fixed in repairs complete all as specified and directed.

Cast iron floor trap with 75mm dia of out let with stainless steel grating incl jointing to waste pipe in run lead complete all as specified and directed.

Cast iron branch pieces double, (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches, suitable for 100mm bore pipe, as in repairs, jointed in run lead all as specified and directed.

Special type cast iron ‘P’ or ‘S’ trap having 300mm to 450mm long tail suitable for 100mm dia CI pipe incl jointing to waste pipe in run lead fixed as in repair complete all as specified and directed.

CI cowl of 100mm dia.

Cast iron bends (any radius) diminishing pieces or tapers of size of 75mm fitted with oval access door, fixed in repairs complete all as specified and directed.

Cast iron bends (any radius) with ducks foot or heel rest of size of 100mm fixed in repairs complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing as per SSR Part-II

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions.

100mm size PVC butt hinges all as specified.

125mm size PVC handles all as specified and directed.

200mm long PVC tower bolt all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

M&L for 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in Sub base (below floor tiles).

Providing and Laying ceramic glossy finish, joint free premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engr-in-Charge. Note : Dado should be flushed with the wall plastering.

M & L 50 mm thick Cement cincrete 1:3:6 type C-2 using 20mm graded crushed stone agg as in plinth protection finishing surface w/o using extra cement complete all as specified and directed.

Purpose made holding down boilts 12 mm dia with nuts and washers complete all as specified and directed.

Excavation in trenches soft loose soil not exeding 1.5 m deep and not exeeding 1.5m in depth for foundation etc.

M&L Cement concrete in foundation 1:4:8 type D-2 , 40 mm graded stone aggregate as in sub base of foundation.

Returning filling in including spreading leveling watering and well ramming in layers not exc. 25 cm soft/looose soil.

Removal of excavated soil exeeding 50 meater and deposting where directed at a level n. exc 1.5 M above the starting point.

Form work to soffits of suspended roof slabs not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete all as specified..

Form work to edges of concrete slabs n exc 20cm thick complete all as specified and directed.

RCC 1:2:4 Type B-1 using 20mm graded stone agg. as in roof slab complete all as specified and directed.

TMT bar 8mm dia & over cut to length,bent to shape as required annealed with mild steel wire not less than 0.9mm dia complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in Sub base (below floor tiles) complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost for the following .

One light/fan point controlled by one,one way switch

M & L for Point wiring with 2.50 Sqmm in copper conductor cable ( multistrand ) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked ) of heavy duty with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mouting of switches/socket/fan regulator etc and continuous earth wire 2.5 sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/socket point/ all as specified and directed by Engr-in-Charge in ceiling portion surface conduit wiring to be done Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost

S&F Modular Switch 1 way, 6A, 1 module complete all specified and as directed by the Engineer -in- Charge

S& FModular Switch 1 way 16A, 1 module complete all specified and as directed by the Engineer -in- Charge

S&F Modular socket 6A/ 16A, 2/3 pin combined 2 module complete all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply and fix LED Lamp LED lamp 9 watt wall lamp complete all as specified and directed

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 4 ways with IP54 protection complete all as specified and directed. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for earth

S & F MCB, SP 06- 32 A, 10 kA, 'B' curve,complete all specified and as directed by the Engineer -in- Charge.

S & F MCB, SPN, 32 A, 10 kA, 'B' curve,complete all specified and as directed by the Engineer -in- Charge.

Supply and fixing Exhaust fan 380 mm sweep matelic body AC single phase 230V with self closinf louvers, including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to Exhaust fan Including necessary pcc/ brick work for fixing on wall to accomodate the Exhaust fan shall be part of job no extra cost .

S&F Energy saving LED light fitting, 1 x 20 watt, 230 volts, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable.

S&F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed. (Make:- Bajaj Cat Part No BCLST25 W or equivalent hereinafter) complete all as specified and directed.

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 10 Sqmm 2 Core all as specified & directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

M &L for laying of well burnt Brick 23 cmx11.5cmx7.5 cm for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 mmx600 mmx6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters deep below normal ground level and filled with alternate layers of charcoal and salt with 15 cm thick layer , connected to galvanised wire earth lead 4mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron, 20 mm bore GI pipe (med grade) for watering, 15 mm bore GI pipe (light grade) for protection of earth lead, including necessary earth work in any type of soil, Earth pit of PCC (1:3:6) type C1 and precast earth pit cover made of RCC (1:11/2:3) type A1 duly reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab complete all as specified and as shown in Electrical Plate No 3 of SSR Part-I including testing on completion.

NORTON BUILDER

FAVOURITE ENGINEERS