The E-Quotation is invited to ascertain and assess the Rate of Materials at par with lowest market rate for framing of Schedule of Rate under D.W. and S. Division, Deoghar

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer, Drinking Water & Sanitation Division, Deoghar

Name of Work: The E-Quotation is invited to ascertain and assess the Rate of Materials at par with lowest market rate for framing of Schedule of Rate under D.W. and S. Division, Deoghar

Contract No: 01/DWSD/DEO (Qu.)/2025-26 Dated: 05.02.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description and Identity Number Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate including Royalty and other taxes but excluding GST Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Polythene water storage tank of mark (e.g sintex/sinter/himgiri / gangotietc)with cover and locking system. (M079) itemH1Code1 Per Liter Excess(+) Full Conversion INR

2 GI Pipe 50 mm dia (TATA or equivalent make) (M193) itemH1Code2 Meter Excess(+) Full Conversion INR

3 Jute (M337) itemH1Code3 Kg Excess(+) Full Conversion INR

4 G.M. Ferrules (M922) itemH1Code4

5 (ii) 10 mm dia Wt. not less than 400 gms itemH1Code5 Each Excess(+) Full Conversion INR

6 (iii) 15 mm dia Wt. not less than 400 gms itemH1Code6 Each Excess(+) Full Conversion INR

7 (iv) 20 mm dia Wt. not less than 600 gms itemH1Code7 Each Excess(+) Full Conversion INR

8 (v) 25 mm dia Wt. not less than 900 gms itemH1Code8 Each Excess(+) Full Conversion INR

9 Stop Cocks (M923) itemH1Code9

10 (i) 15 mm brass stop cock wt. not less than 300 gms itemH1Code10 Each Excess(+) Full Conversion INR

11 (ii) 20 mm brass stop cock wt. not less than 400 gms itemH1Code11 Each Excess(+) Full Conversion INR

12 (iii) 25 mm brass stop cock wt. not less than 575 gms itemH1Code12 Each Excess(+) Full Conversion INR

13 (iv) 32 mm brass stop cock wt. not less than 850 gms itemH1Code13 Each Excess(+) Full Conversion INR

14 (v) 40 mm brass stop cock wt. not less than 1.15 kg itemH1Code14 Each Excess(+) Full Conversion INR

15 (vi) 50 mm brass stop cock wt. not less than 2.15 kg itemH1Code15 Each Excess(+) Full Conversion INR

16 (vii) 15 mm dia C.I. Body brass working part stop cock. itemH1Code16 Each Excess(+) Full Conversion INR

17 (viii) 20 mm dia C.I. Body brass working part stop cock. itemH1Code17 Each Excess(+) Full Conversion INR

18 (ix) 25 mm dia C.I. Body brass working part stop cock. itemH1Code18 Each Excess(+) Full Conversion INR

19 G.M. Full way Valve (M924) itemH1Code19

20 (i) 15 mm dia wt. not less than 300 gms without wheel itemH1Code20 Each Excess(+) Full Conversion INR

21 (ii) 20 mm dia wt. not less than 400 gms without wheel itemH1Code21 Each Excess(+) Full Conversion INR

22 (iii) 25 mm dia wt. not less than 500 gms without wheel itemH1Code22 Each Excess(+) Full Conversion INR

23 (iv) 32 mm dia wt. not less than 700 gms without wheel itemH1Code23 Each Excess(+) Full Conversion INR

24 (v) 40 mm dia wt. not less than 1.0 kg without wheel itemH1Code24 Each Excess(+) Full Conversion INR

25 (vi) 50 mm dia wt. not less than 1.4 kg without wheel itemH1Code25 Each Excess(+) Full Conversion INR

26 (vii) 65 mm dia wt. not less than 1.8 kg without wheel itemH1Code26 Each Excess(+) Full Conversion INR

27 (viii) 80 mm dia wt. not less than 2.5 kg without wheel itemH1Code27 Each Excess(+) Full Conversion INR

28 G.M. NON RETURN VALVE VERTICLE (M925) itemH1Code28

29 (i) 15 mm dia wt. not less than 150 gms itemH1Code29 Each Excess(+) Full Conversion INR

30 (ii) 20 mm dia wt. not less than 250 gms itemH1Code30 Each Excess(+) Full Conversion INR

31 (iii) 25 mm dia wt. not less than 375 gms itemH1Code31 Each Excess(+) Full Conversion INR

32 (iv) 32 mm dia wt. not less than 600 gms itemH1Code32 Each Excess(+) Full Conversion INR

33 (v) 40 mm dia wt. not less than 700 gms itemH1Code33 Each Excess(+) Full Conversion INR

34 (vi) 50 mm dia wt. not less than 1.0 kg itemH1Code34 Each Excess(+) Full Conversion INR

35 (vii) 65 mm dia wt. not less than 1.20 kg itemH1Code35 Each Excess(+) Full Conversion INR

36 (viii) 80 mm dia wt. not less than 1.50 kg itemH1Code36 Each Excess(+) Full Conversion INR

37 (ix) 100 mm dia wt. not less than 1.80 kg itemH1Code37 Each Excess(+) Full Conversion INR

38 G.M. Non Return Valve Horizontal (M926) itemH1Code38

39 (i) 15 mm dia wt. not less than 150 gms itemH1Code39 Each Excess(+) Full Conversion INR

40 (ii) 20 mm dia wt. not less than 250 gms itemH1Code40 Each Excess(+) Full Conversion INR

41 (iii) 25 mm dia wt. not less than 375 gms itemH1Code41 Each Excess(+) Full Conversion INR

42 (iv) 32 mm dia wt. not less than 600 gms itemH1Code42 Each Excess(+) Full Conversion INR

43 (v) 40 mm dia wt. not less than 700 gms itemH1Code43 Each Excess(+) Full Conversion INR

44 (vi) 50 mm dia wt. not less than 1.0 kg itemH1Code44 Each Excess(+) Full Conversion INR

45 (vii) 65 mm dia wt. not less than 1.20 kg itemH1Code45 Each Excess(+) Full Conversion INR

46 (viii) 80 mm dia wt. not less than 1.50 kg itemH1Code46 Each Excess(+) Full Conversion INR

47 (ix) 100 mm dia wt. not less than 1.80 kg itemH1Code47 Each Excess(+) Full Conversion INR

48 COCKs (M927) itemH1Code48

49 (i) 15 mm dia G.M. bib cock wt. not less than 300 gms itemH1Code49 Each Excess(+) Full Conversion INR

50 (ii) 15 mm dia brass bib cock wt. not less than 400 gms itemH1Code50 Each Excess(+) Full Conversion INR

51 (iii) 15 mm dia C.I. bib cock wt. not less than 400 gms itemH1Code51 Each Excess(+) Full Conversion INR

52 (iv) 15 mm dia C.I. Body brass working part spray painted bib cock wt. not less than 400 gms itemH1Code52 Each Excess(+) Full Conversion INR

53 (v) 15 mm dia C.I. Brass pillar cock cock wt. not less than 400 gms itemH1Code53 Each Excess(+) Full Conversion INR

54 (vi) 15 mm C.I. Plug cock ordinary itemH1Code54 Each Excess(+) Full Conversion INR

55 (vii) 15 mm C.I. push cock ordinary itemH1Code55 Each Excess(+) Full Conversion INR

56 CHROMIUM PLATED BRASS FITTINGS (M928) itemH1Code56

57 (i) C.P. Shower rose 100 mm dia itemH1Code57 Each Excess(+) Full Conversion INR

58 (ii) C.P. Shower rose 125 mm dia itemH1Code58 Each Excess(+) Full Conversion INR

59 (iii) P.V.C. Shower rose 150 mm dia itemH1Code59 Each Excess(+) Full Conversion INR

60 (iv) P.V.C Shower rose 125 mm dia itemH1Code60 Each Excess(+) Full Conversion INR

61 CONNECTION PIPE (M929) itemH1Code61

62 (i) 15 mm dia x 30 cm. long lead connection pipe with brass fittings. itemH1Code62 Each Excess(+) Full Conversion INR

63 (ii) 15 mm dia x 45 cm. long lead connection pipe with brass fittings. itemH1Code63 Each Excess(+) Full Conversion INR

64 (iii) 15 mm dia x 30 cm. long PVC connection pipe with brass fittings. itemH1Code64 Each Excess(+) Full Conversion INR

65 (iv) 15 mm dia x 45 cm. long PVC connection pipe with brass fittings. itemH1Code65 Each Excess(+) Full Conversion INR

66 G.I. FITTINGS (CONFORMING TO I.S. -1879 ) ISI Marked (M930) itemH1Code66

67 [A] G.I. BEND itemH1Code67

68 (i) 15 mm itemH1Code68 Each Excess(+) Full Conversion INR

69 (ii) 20 mm itemH1Code69 Each Excess(+) Full Conversion INR

70 (iii) 25 mm itemH1Code70 Each Excess(+) Full Conversion INR

71 (iv) 32 mm itemH1Code71 Each Excess(+) Full Conversion INR

72 (v) 40 mm itemH1Code72 Each Excess(+) Full Conversion INR

73 (vi) 50 mm itemH1Code73 Each Excess(+) Full Conversion INR

74 (vii) 65 mm itemH1Code74 Each Excess(+) Full Conversion INR

75 (viii) 80 mm itemH1Code75 Each Excess(+) Full Conversion INR

76 (ix) 100 mm itemH1Code76 Each Excess(+) Full Conversion INR

77 (x) 125 mm itemH1Code77 Each Excess(+) Full Conversion INR

78 (xi) 150 mm itemH1Code78 Each Excess(+) Full Conversion INR

79 [B] ELBOW OF THE FOLLOWING SIZES itemH1Code79

80 (i) 15 mm itemH1Code80 Each Excess(+) Full Conversion INR

81 (ii) 20 mm itemH1Code81 Each Excess(+) Full Conversion INR

82 (iii) 25 mm itemH1Code82 Each Excess(+) Full Conversion INR

83 (iv) 32 mm itemH1Code83 Each Excess(+) Full Conversion INR

84 (v) 40 mm itemH1Code84 Each Excess(+) Full Conversion INR

85 (vi) 50 mm itemH1Code85 Each Excess(+) Full Conversion INR

86 (vii) 65 mm itemH1Code86 Each Excess(+) Full Conversion INR

87 (viii) 80 mm itemH1Code87 Each Excess(+) Full Conversion INR

88 (ix) 100 mm itemH1Code88 Each Excess(+) Full Conversion INR

89 (x) 125 mm itemH1Code89 Each Excess(+) Full Conversion INR

90 (xi) 150 mm itemH1Code90 Each Excess(+) Full Conversion INR

91 [C] TEE PLAIN OF THE FOLLOWING SIZES itemH1Code91

92 (i) 15 mm itemH1Code92 Each Excess(+) Full Conversion INR

93 (ii) 20 mm itemH1Code93 Each Excess(+) Full Conversion INR

94 (iii) 25 mm itemH1Code94 Each Excess(+) Full Conversion INR

95 (iv) 32 mm itemH1Code95 Each Excess(+) Full Conversion INR

96 (v) 40 mm itemH1Code96 Each Excess(+) Full Conversion INR

97 (vi) 50 mm itemH1Code97 Each Excess(+) Full Conversion INR

98 (vii) 65 mm itemH1Code98 Each Excess(+) Full Conversion INR

99 (viii) 80 mm itemH1Code99 Each Excess(+) Full Conversion INR

100 (ix) 100 mm itemH1Code100 Each Excess(+) Full Conversion INR

101 (x) 125 mm itemH1Code101 Each Excess(+) Full Conversion INR

102 (xi) 150 mm itemH1Code102 Each Excess(+) Full Conversion INR

103 [D] REDUCING TEE PLAIN OF THE FOLLOWING SIZES (Taking larger dimension) itemH1Code103

104 (i) 20 mm itemH1Code104 Each Excess(+) Full Conversion INR

105 (ii) 25 mm itemH1Code105 Each Excess(+) Full Conversion INR

106 (iii) 32 mm itemH1Code106 Each Excess(+) Full Conversion INR

107 (iv) 40 mm itemH1Code107 Each Excess(+) Full Conversion INR

108 (v) 50 mm itemH1Code108 Each Excess(+) Full Conversion INR

109 (vi) 65 mm itemH1Code109 Each Excess(+) Full Conversion INR

110 (vii) 80 mm itemH1Code110 Each Excess(+) Full Conversion INR

111 (viii) 100 mm itemH1Code111 Each Excess(+) Full Conversion INR

112 (ix) 125 mm itemH1Code112 Each Excess(+) Full Conversion INR

113 (x) 150 mm itemH1Code113 Each Excess(+) Full Conversion INR

114 [E] SOCKET PLAIN OF THE FOLLOWING SIZE (Taking larger dimension) itemH1Code114

115 (i) 15 mm itemH1Code115 Each Excess(+) Full Conversion INR

116 (ii) 20 mm itemH1Code116 Each Excess(+) Full Conversion INR

117 (iii) 25 mm itemH1Code117 Each Excess(+) Full Conversion INR

118 (iv) 32 mm itemH1Code118 Each Excess(+) Full Conversion INR

119 (v) 40 mm itemH1Code119 Each Excess(+) Full Conversion INR

120 (vi) 50 mm itemH1Code120 Each Excess(+) Full Conversion INR

121 (vii) 65 mm itemH1Code121 Each Excess(+) Full Conversion INR

122 (viii) 80 mm itemH1Code122 Each Excess(+) Full Conversion INR

123 (ix) 100 mm itemH1Code123 Each Excess(+) Full Conversion INR

124 (x) 125 mm itemH1Code124 Each Excess(+) Full Conversion INR

125 (xi) 150 mm itemH1Code125 Each Excess(+) Full Conversion INR

126 [F] REDUCING SOCKET PLAIN OF THE FOLLOWING SIZES (Taking larger dimension) itemH1Code126

127 (i) 20 mm itemH1Code127 Each Excess(+) Full Conversion INR

128 (ii) 25 mm itemH1Code128 Each Excess(+) Full Conversion INR

129 (iii) 32 mm itemH1Code129 Each Excess(+) Full Conversion INR

130 (iv) 40 mm itemH1Code130 Each Excess(+) Full Conversion INR

131 (v) 50 mm itemH1Code131 Each Excess(+) Full Conversion INR

132 (vi) 65 mm itemH1Code132 Each Excess(+) Full Conversion INR

133 (vii) 80 mm itemH1Code133 Each Excess(+) Full Conversion INR

134 (viii) 100 mm itemH1Code134 Each Excess(+) Full Conversion INR

135 (ix) 125 mm itemH1Code135 Each Excess(+) Full Conversion INR

136 (x) 150 mm itemH1Code136 Each Excess(+) Full Conversion INR

137 [G] UNION SOCKET OF THE FOLLOWING SIZES itemH1Code137

138 (i) 15 mm itemH1Code138 Each Excess(+) Full Conversion INR

139 (ii) 20 mm itemH1Code139 Each Excess(+) Full Conversion INR

140 (iii) 25 mm itemH1Code140 Each Excess(+) Full Conversion INR

141 (iv) 32 mm itemH1Code141 Each Excess(+) Full Conversion INR

142 (v) 40 mm itemH1Code142 Each Excess(+) Full Conversion INR

143 (vi) 50 mm itemH1Code143 Each Excess(+) Full Conversion INR

144 (vii) 65 mm itemH1Code144 Each Excess(+) Full Conversion INR

145 (viii) 80 mm itemH1Code145 Each Excess(+) Full Conversion INR

146 (ix) 100 mm itemH1Code146 Each Excess(+) Full Conversion INR

147 (x) 125 mm itemH1Code147 Each Excess(+) Full Conversion INR

148 (xi) 150 mm itemH1Code148 Each Excess(+) Full Conversion INR

149 [H] PLUGS OF THE FOLLOWING SIZES itemH1Code149

150 (i) 15 mm itemH1Code150 Each Excess(+) Full Conversion INR

151 (ii) 20 mm itemH1Code151 Each Excess(+) Full Conversion INR

152 (iii) 25 mm itemH1Code152 Each Excess(+) Full Conversion INR

153 (iv) 32 mm itemH1Code153 Each Excess(+) Full Conversion INR

154 (v) 40 mm itemH1Code154 Each Excess(+) Full Conversion INR

155 (vi) 50 mm itemH1Code155 Each Excess(+) Full Conversion INR

156 (vii) 65 mm itemH1Code156 Each Excess(+) Full Conversion INR

157 (viii) 80 mm itemH1Code157 Each Excess(+) Full Conversion INR

158 (ix) 100 mm itemH1Code158 Each Excess(+) Full Conversion INR

159 (x) 125 mm itemH1Code159 Each Excess(+) Full Conversion INR

160 (xi) 150 mm itemH1Code160 Each Excess(+) Full Conversion INR

161 [I] JAM NUTS OF THE FOLLOWING SIZES itemH1Code161

162 (i) 15 mm itemH1Code162 Each Excess(+) Full Conversion INR

163 (ii) 20 mm itemH1Code163 Each Excess(+) Full Conversion INR

164 (iii) 25 mm itemH1Code164 Each Excess(+) Full Conversion INR

165 (iv) 32 mm itemH1Code165 Each Excess(+) Full Conversion INR

166 (v) 40 mm itemH1Code166 Each Excess(+) Full Conversion INR

167 (vi) 50 mm itemH1Code167 Each Excess(+) Full Conversion INR

168 (vii) 65 mm itemH1Code168 Each Excess(+) Full Conversion INR

169 (viii) 80 mm itemH1Code169 Each Excess(+) Full Conversion INR

170 (ix) 100 mm itemH1Code170 Each Excess(+) Full Conversion INR

171 (x) 125 mm itemH1Code171 Each Excess(+) Full Conversion INR

172 (xi) 150 mm itemH1Code172 Each Excess(+) Full Conversion INR

173 [J] G.I. NIPPLE OF THE FOLLOWING SIZES itemH1Code173

174 (i) 15 mm dia x 100 mm long itemH1Code174 Each Excess(+) Full Conversion INR

175 (ii) 20 mm dia x 100 mm long itemH1Code175 Each Excess(+) Full Conversion INR

176 (iii) 25 mm dia x 100 mm long itemH1Code176 Each Excess(+) Full Conversion INR

177 (iv) 32mm dia x 100 mm long itemH1Code177 Each Excess(+) Full Conversion INR

178 (v) 40 mm dia x 100 mm long itemH1Code178 Each Excess(+) Full Conversion INR

179 (vi) 50 mm dia x 100 mm long itemH1Code179 Each Excess(+) Full Conversion INR

180 (vii) 65 mm dia x 100 mm long itemH1Code180 Each Excess(+) Full Conversion INR

181 (viii) 80 mm dia x 100 mm long itemH1Code181 Each Excess(+) Full Conversion INR

182 (ix) 100 mm dia x 100 mm long itemH1Code182 Each Excess(+) Full Conversion INR

183 [K] G.I. PIPES MIDIUM(Tata mark) OR EQUIVALENT as per IS-1239 (part-01)/2004 ISI Marked/Medium Quality itemH1Code183

184 (i) 15 mm dia itemH1Code184 Meter Excess(+) Full Conversion INR

185 (ii) 20 mm dia itemH1Code185 Meter Excess(+) Full Conversion INR

186 (iii) 25 mm dia itemH1Code186 Meter Excess(+) Full Conversion INR

187 (iv) 32 mm dia itemH1Code187 Meter Excess(+) Full Conversion INR

188 (v) 40 mm dia itemH1Code188 Meter Excess(+) Full Conversion INR

189 (vii) 65 mm dia itemH1Code189 Meter Excess(+) Full Conversion INR

190 MIRRORS (M931) itemH1Code190

191 (a) Mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror including C.P. brass revolving fittings 3 mm plywood board and C.P. hinges etc. to fix the mirror itemH1Code191 Each Excess(+) Full Conversion INR

192 (b) -do- 450 mm x 300 mm -do- itemH1Code192 Each Excess(+) Full Conversion INR

193 (a) Glass shelf 600 mm x 125 mm with C.P. brass rail (M932) itemH1Code193 Each Excess(+) Full Conversion INR

194 (b) -do- 450 mm x 125 mm -do- itemH1Code194 Each Excess(+) Full Conversion INR

195 (a) C.P. Brass towel rail 20 mm x 600 mm with bracket all complete (M933) itemH1Code195 Each Excess(+) Full Conversion INR

196 (b) Anodized aluminum 20 mm x 600 mm towel rail complete with brackets itemH1Code196 Each Excess(+) Full Conversion INR

197 C.P. brass soap dish medium quality with screw and hinges etc. (M934) itemH1Code197 Each Excess(+) Full Conversion INR

198 C.P. liquid soap solution holder (M935) itemH1Code198 Each Excess(+) Full Conversion INR

199 VITREOUS WHITE GLAZED INDIAN WATER CLOSET OF Hindustan / Parry Ware / Cera / Naycer or any other equivalent make (M936) itemH1Code199

200 (a) 580 mm long itemH1Code200 Each Excess(+) Full Conversion INR

201 (b) 510 mm long itemH1Code201 Each Excess(+) Full Conversion INR

202 (c) 450 mm long itemH1Code202 Each Excess(+) Full Conversion INR

203 (d) 510 mm long White glazed fiber I.W.C itemH1Code203 Each Excess(+) Full Conversion INR

204 PAIR OF VETREOUS WHITE GLAZED FOOT REST OF Hindustan / Parryware / Cera / Naycer or any other equivalent make (M937) itemH1Code204 Each Excess(+) Full Conversion INR

205 15 liters capacity pull and let go high level C.I. cistern complete with ball cock and a pair of bracket (M938) itemH1Code205 Each Excess(+) Full Conversion INR

206 (a) 12.5 liters lowdown C.I. Cistern (M939) itemH1Code206 Each Excess(+) Full Conversion INR

207 (b) 10.0 liters capacity P.V.C. low design cistern itemH1Code207 Each Excess(+) Full Conversion INR

208 (a) White Glazed vitreous E.W.C with "P" trap or any other equivalent make. (M940) itemH1Code208 Each Excess(+) Full Conversion INR

209 (b) E.W.C with "S" trap 400 mm high of Hindustan / Parry ware / Cera / Naycear or any other equivalent make itemH1Code209 Each Excess(+) Full Conversion INR

210 (c) Black / white plastic seat for E.W.C -do- as above. itemH1Code210 Each Excess(+) Full Conversion INR

211 (a) White glazed vitreous earthen were urinal flat back of Hindustan / Parryware / Cera / Naycer or any other equivalent make 600 mm x 350 mm size. (M941) itemH1Code211 Each Excess(+) Full Conversion INR

212 (b) -do- squatting small 450 mm x 350 mm itemH1Code212 Each Excess(+) Full Conversion INR

213 (c) -do- squatting large 600 mm x 350 mm itemH1Code213 Each Excess(+) Full Conversion INR

214 (d) White glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm Hindustan / Parryware / Cera / Naycer or any other equivalent make itemH1Code214 Each Excess(+) Full Conversion INR

215 (e) Partition plate for urinal 25" x 13" size itemH1Code215 Each Excess(+) Full Conversion INR

216 (f) 5 liters C.I. automatic cistern with all P.V.C fittings itemH1Code216 Each Excess(+) Full Conversion INR

217 White glazed vitreous Wash Hand Basin 550 mm x 400 mm size of Hindustan / Parryware / Cera / Naycer or any other equivalent make. (M942) itemH1Code217 Each Excess(+) Full Conversion INR

218 White glazed vitreous earthen ware kitchen sinks of Hindustan / Parryware / Cera / Naycer or any other equivalent make (M943) itemH1Code218

219 (a) Kitchen sink 600 mm x 450 mm x 200 mm (24" x 18" x 8") itemH1Code219 Each Excess(+) Full Conversion INR

220 (b) Kitchen sink 600 mm x 450 mm x 250 mm (24" x 18" x 10") itemH1Code220 Each Excess(+) Full Conversion INR

221 (c) Lab sink 450 mm x 300 mm x 150 mm (18" x 12" x 6") itemH1Code221 Each Excess(+) Full Conversion INR

222 (d) Lab sink 300 mm x 250 mm x 150 mm (12" x 10" x 6") itemH1Code222 Each Excess(+) Full Conversion INR

223 DRAIN BOARD. (M944) itemH1Code223

224 (a) 600 mm x 450 mm (24" x 18") itemH1Code224 Each Excess(+) Full Conversion INR

225 (b) 525 mm x 450 mm (21" x 18") itemH1Code225 Each Excess(+) Full Conversion INR

226 H.C.I. Pipes (M945) itemH1Code226

227 (a) 50 mm dia single socket 6'-0" (with ear weight 13 kg) itemH1Code227 Each Excess(+) Full Conversion INR

228 (b) 80 mm dia single socket 6'-0" (with ear weight 18 kg) itemH1Code228 Each Excess(+) Full Conversion INR

229 (c) 100 mm dia single socket 6'-0" (with ear weight 23 kg) itemH1Code229 Each Excess(+) Full Conversion INR

230 (d) 150 mm dia single socket 6'-0" (with ear weight 30 kg) itemH1Code230 Each Excess(+) Full Conversion INR

231 (e) 50 mm dia double socket 6'-0" (with ear weight 14 kg) itemH1Code231 Each Excess(+) Full Conversion INR

232 (f) 80 mm dia double socket 6'-0" (with ear weight 19 kg) itemH1Code232 Each Excess(+) Full Conversion INR

233 (g) 100 mm dia double socket 6'-0" (with ear weight 25 kg) itemH1Code233 Each Excess(+) Full Conversion INR

234 (h) 150 mm dia double socket 6'-0" (with ear weight 13 kg) itemH1Code234 Each Excess(+) Full Conversion INR

235 (i) 50 mm dia single socket 3'-0" (with ear weight 7.25 kg) itemH1Code235 Each Excess(+) Full Conversion INR

236 (j) 80 mm dia single socket 3'-0" (with ear weight 10.5 kg) itemH1Code236 Each Excess(+) Full Conversion INR

237 (k) 100 mm dia single socket 3'-0" (with ear weight 13.75 kg) itemH1Code237 Each Excess(+) Full Conversion INR

238 (l) 150 mm dia single socket 3'-0" with ear itemH1Code238 Each Excess(+) Full Conversion INR

239 (m) 50 mm dia single socket 2'-0" (with ear weight 5.35 kg) itemH1Code239 Each Excess(+) Full Conversion INR

240 (n) 80 mm dia single socket 2'-0" (with ear weight 8.00 kg) itemH1Code240 Each Excess(+) Full Conversion INR

241 (o)100 mm dia single socket 2'-0"(with ear weight 10.10 kg) itemH1Code241 Each Excess(+) Full Conversion INR

242 (p) 150 mm dia single socket 2'-0" with ear itemH1Code242 Each Excess(+) Full Conversion INR

243 (q) 50 mm dia single socket 1'-0" (with ear weight 3.4 kg) itemH1Code243 Each Excess(+) Full Conversion INR

244 (r) 80 mm dia single socket 1'-0"(with ear weight 5.50 kg) itemH1Code244 Each Excess(+) Full Conversion INR

245 (s) 100 mm dia single socket 1'-0"(with ear weight 7.60 kg) itemH1Code245 Each Excess(+) Full Conversion INR

246 (t) 150 mm dia single socket itemH1Code246 Each Excess(+) Full Conversion INR

247 H.C.I. FITTINGS. (M946) itemH1Code247

248 (I) Plain bend of following size itemH1Code248

249 (a) 50 mm dia (weight without ear and socket 2.75 kg) itemH1Code249 Each Excess(+) Full Conversion INR

250 (b) 80 mm dia (weight without ear and socket 3.5 kg) itemH1Code250 Each Excess(+) Full Conversion INR

251 (c) 100 mm dia (weight without ear and socket 4.5 kg) itemH1Code251 Each Excess(+) Full Conversion INR

252 (d) 150 mm dia (weight without ear and socket 4.5 kg) itemH1Code252 Each Excess(+) Full Conversion INR

253 (II) Bend with door with following size itemH1Code253

254 (a) 50 mm dia (Wight without ear and socket 2.75 kg) itemH1Code254 Each Excess(+) Full Conversion INR

255 (b) 80 mm dia (Wight without ear and socket 4.00 kg) itemH1Code255 Each Excess(+) Full Conversion INR

256 (c) 100 mm dia -do- 5.5 kg itemH1Code256 Each Excess(+) Full Conversion INR

257 (d) 150 mm dia -do- itemH1Code257 Each Excess(+) Full Conversion INR

258 (III) Single Junction with door of followings sizes. itemH1Code258

259 (a) 50 mm dia (weight without ear and socket 3.75 kg) itemH1Code259 Each Excess(+) Full Conversion INR

260 (b) 80 mm dia (weight without ear and socket 6.50 kg) itemH1Code260 Each Excess(+) Full Conversion INR

261 (c) 100 mm dia -do- 9.50 kg itemH1Code261 Each Excess(+) Full Conversion INR

262 (d) 150 mm dia -do- itemH1Code262 Each Excess(+) Full Conversion INR

263 (IV) Double junction with door of following sizes. itemH1Code263

264 (a) 50 mm dia -do- 4.5 kg itemH1Code264 Each Excess(+) Full Conversion INR

265 (b) 80 mm dia -do- 7.00 kg itemH1Code265 Each Excess(+) Full Conversion INR

266 (c) 100 mm dia -do- 13.00 kg itemH1Code266 Each Excess(+) Full Conversion INR

267 (d) 150 mm dia -do- itemH1Code267 Each Excess(+) Full Conversion INR

268 (V) Heel rest bend of following sizes itemH1Code268

269 (a) 50 mm dia itemH1Code269 Each Excess(+) Full Conversion INR

270 (b) 80 mm dia itemH1Code270 Each Excess(+) Full Conversion INR

271 (c) 100 mm dia itemH1Code271 Each Excess(+) Full Conversion INR

272 (d) 150 mm dia itemH1Code272 Each Excess(+) Full Conversion INR

273 (VI) Cowel of following sizes itemH1Code273

274 (a) 50 mm dia (weight without ear and socket 2.25 kg) itemH1Code274 Each Excess(+) Full Conversion INR

275 (b) 80 mm dia (weight without ear and socket 3.25 kg) itemH1Code275 Each Excess(+) Full Conversion INR

276 (c) 100 mm dia (weight without ear and socket 3.25 kg) itemH1Code276 Each Excess(+) Full Conversion INR

277 (d) 150 mm dia -do- itemH1Code277 Each Excess(+) Full Conversion INR

278 (VII) 100 mm dia "P" trap (wt without ear and socket)8.5 kg itemH1Code278 Each Excess(+) Full Conversion INR

279 (VIII) 100 mm dia "P" trap (wt without ear and socket)8.8 kg itemH1Code279 Each Excess(+) Full Conversion INR

280 (IX) 100 mm x 80 mm floor trap (weight without ear and socket) 4.00 kg itemH1Code280 Each Excess(+) Full Conversion INR

281 (X) Pass over 50 mm x 150 mm for 50 mm projection itemH1Code281 Each Excess(+) Full Conversion INR

282 (XI) -Do- 100 mm x 150 mm for 100 mm projection itemH1Code282 Each Excess(+) Full Conversion INR

283 (XII) Inverted Junction single 100 mm x 50 (weight without ear and socket) 9.0 kg itemH1Code283 Each Excess(+) Full Conversion INR

284 (XIII) Inverted Junction double 100 mm x 50 mm x 50 mm (weight without ear and socket) 12.0 kg itemH1Code284 Each Excess(+) Full Conversion INR

285 (XIV) H.C.I. offset 80 mm projection of the following Size itemH1Code285

286 (a) 50 mm dia (weight without ear and socket) 2.75 kg itemH1Code286 Each Excess(+) Full Conversion INR

287 (b) 80 mm dia -do- 3.50 kg itemH1Code287 Each Excess(+) Full Conversion INR

288 (c) 100 mm dia -do- 5.00 kg itemH1Code288 Each Excess(+) Full Conversion INR

289 (d) 150 mm dia -do- itemH1Code289 Each Excess(+) Full Conversion INR

290 (XV) H.C.I. Socket of following sizes itemH1Code290

291 (a) 50 mm dia (weight without ear) 1.50 kg itemH1Code291 Each Excess(+) Full Conversion INR

292 (b) 80 mm dia (weight without ear) 3.00 kg itemH1Code292 Each Excess(+) Full Conversion INR

293 (c) 100 mm dia (weight without ear) 4.50 kg itemH1Code293 Each Excess(+) Full Conversion INR

294 (d) 150 mm dia (weight without ear) -do- itemH1Code294 Each Excess(+) Full Conversion INR

295 C.I. Cover with frame for manhole and inspection chamber. (M947) itemH1Code295

296 (a) 600 mm x 450 mm size (wt. 39 kg) itemH1Code296 Each Excess(+) Full Conversion INR

297 (b) 600 mm x 450 mm size (wt. 25 kg) itemH1Code297 Each Excess(+) Full Conversion INR

298 (c) 500 mm x 450 mm size (wt. 25 kg) itemH1Code298 Each Excess(+) Full Conversion INR

299 C.I. Bracket pair for W.H.B. (M948) itemH1Code299

300 (a) 550 mm x 400 mm size (22" x 16") itemH1Code300 Each Excess(+) Full Conversion INR

301 (b) -do- for 12.5 liter cistern itemH1Code301 Each Excess(+) Full Conversion INR

302 (c) -do- for 600 mm x 450 mm (24" x 18") sink itemH1Code302 Each Excess(+) Full Conversion INR

303 (d) 40 mm x 60 mm MS Plate bracket for sink as above itemH1Code303 Each Excess(+) Full Conversion INR

304 (a) 32 mm (1 1/4") C.P. Brass waste for W.H.B (M949) itemH1Code304 Each Excess(+) Full Conversion INR

305 (b) 40 mm (1 1/2") C.P. Brass waste for W.H.B for sink itemH1Code305 Each Excess(+) Full Conversion INR

306 (c) 32 mm (1 1/4") C.P. waste of white metal itemH1Code306 Each Excess(+) Full Conversion INR

307 (d) 40 mm (1 1/2") C.P. waste of white metal itemH1Code307 Each Excess(+) Full Conversion INR

308 (a) 32 mm (1 1/4") P.V.C. waste pipe 750 mm long (2'6" long) with brass Union for W H B (M950) itemH1Code308 Each Excess(+) Full Conversion INR

309 (b) 40 mm (1 1/2") P.V.C. waste pipe 750 mm long (2'6" long) with brass Union for W H B itemH1Code309 Each Excess(+) Full Conversion INR

310 32 mm (1 1/4") P.V.C. telescopic flush pipe with brass union for high level cistern (M951) itemH1Code310 Each Excess(+) Full Conversion INR

311 Rubber Inserttion 3 mm (1/8") thick (M952) itemH1Code311 Kg Excess(+) Full Conversion INR

312 Pig Lead (M953) itemH1Code312 Kg Excess(+) Full Conversion INR

313 Yarn (M954) itemH1Code313 Kg Excess(+) Full Conversion INR

314 Rubber Gasket for C.I pipe of Good quality (M955) itemH1Code314

315 (a) 80 mm itemH1Code315 Each Excess(+) Full Conversion INR

316 (b)100 mm itemH1Code316 Each Excess(+) Full Conversion INR

317 (c)125 mm itemH1Code317 Each Excess(+) Full Conversion INR

318 (d)150 mm itemH1Code318 Each Excess(+) Full Conversion INR

319 (e)200 mm itemH1Code319 Each Excess(+) Full Conversion INR

320 (f)250 mm itemH1Code320 Each Excess(+) Full Conversion INR

321 (g)300 mm itemH1Code321 Each Excess(+) Full Conversion INR

322 (h)350 mm itemH1Code322 Each Excess(+) Full Conversion INR

323 (i)400 mm itemH1Code323 Each Excess(+) Full Conversion INR

324 (j)450 mm itemH1Code324 Each Excess(+) Full Conversion INR

325 (k)500 mm itemH1Code325 Each Excess(+) Full Conversion INR

326 (l)600 mm itemH1Code326 Each Excess(+) Full Conversion INR

327 (m)700 mm itemH1Code327 Each Excess(+) Full Conversion INR

328 (n)750 mm itemH1Code328 Each Excess(+) Full Conversion INR

329 (o)800 mm itemH1Code329 Each Excess(+) Full Conversion INR

330 (p)900 mm itemH1Code330 Each Excess(+) Full Conversion INR

331 (q)1000 mm itemH1Code331 Each Excess(+) Full Conversion INR

332 (r)1200 mm itemH1Code332 Each Excess(+) Full Conversion INR

333 Cotton waste (M956) itemH1Code333 Kg Excess(+) Full Conversion INR

334 Asbestos Suta (gland packing) (M957) itemH1Code334 Kg Excess(+) Full Conversion INR

335 Solvent Cement (M958) itemH1Code335 Kg Excess(+) Full Conversion INR

336 Hydrocloric acid (Sepecific gravity 1.20) (M959) itemH1Code336 Litre Excess(+) Full Conversion INR

337 CP & PVC Fitting (M960) itemH1Code337

338 (i)32 mm dia C.P. Waste itemH1Code338 Each Excess(+) Full Conversion INR

339 (ii)32 mm dia PV C waste pipe 750 mm long with coupling itemH1Code339 Each Excess(+) Full Conversion INR

340 (iii)40 mm dia C.P. waste itemH1Code340 Each Excess(+) Full Conversion INR

341 (iv 40 mm dia PVC waste pipe 750 mm long with coupling itemH1Code341 Each Excess(+) Full Conversion INR

342 (v 100 mm dia steel jali itemH1Code342 Each Excess(+) Full Conversion INR

343 (vi)15 mm dia C.P. nipple with coupling (short pieces) itemH1Code343 Each Excess(+) Full Conversion INR

344 (vii)50 mm dia PVC pipe with coupling itemH1Code344 Each Excess(+) Full Conversion INR

345 Special type of C.P. Bath room fittings for V.I.P. buildings(JAL, Jaquar, Marc or equivalent mark) (M961) itemH1Code345

346 (i) Pillar Cock (ISI) itemH1Code346 Each Excess(+) Full Conversion INR

347 (ii) Pillar Cock (Long neck) itemH1Code347 Each Excess(+) Full Conversion INR

348 (iii) Bib Cock (ISI) itemH1Code348 Each Excess(+) Full Conversion INR

349 (iv) Bib Cock (Long Thread) itemH1Code349 Each Excess(+) Full Conversion INR

350 (v) Angular Stop Cock itemH1Code350 Each Excess(+) Full Conversion INR

351 (vi) Angular Stop Cock (Long Thread) itemH1Code351 Each Excess(+) Full Conversion INR

352 (vii) Concealed stop cock reduce (ISI) itemH1Code352 Each Excess(+) Full Conversion INR

353 (viii) Concealed stop Cock heavy-duty extra adjustable wall flange itemH1Code353 Each Excess(+) Full Conversion INR

354 (ix) Long Body Bib Cock itemH1Code354 Each Excess(+) Full Conversion INR

355 (x) Swan Neck Tap with left hand Operating Knob itemH1Code355 Each Excess(+) Full Conversion INR

356 (xi) Central hole basin mixer (Best Quality) itemH1Code356 Each Excess(+) Full Conversion INR

357 (xii) Wall mixer with telephonic shower arrangement itemH1Code357 Each Excess(+) Full Conversion INR

358 (xiii) Wall mixer with provision for over head shower with elbow coupling and well flange itemH1Code358 Each Excess(+) Full Conversion INR

359 (xiv) Wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange itemH1Code359 Each Excess(+) Full Conversion INR

360 (xv) Sink mixer with swinging casted spout itemH1Code360 Each Excess(+) Full Conversion INR

361 (xvi) Sink Cock with swinging casted spout itemH1Code361 Each Excess(+) Full Conversion INR

362 (xvii) 4 - way diverter for concealed fittings itemH1Code362 Each Excess(+) Full Conversion INR

363 (xviii) Pressure adjustable shower with revolving joint itemH1Code363 Each Excess(+) Full Conversion INR

364 (xix) Telephone shower with flexible pipe itemH1Code364 Each Excess(+) Full Conversion INR

365 (xx) Flush Cock with wall flange (25 mm) itemH1Code365 Each Excess(+) Full Conversion INR

366 (xxi) Towel Rail 24" itemH1Code366 Each Excess(+) Full Conversion INR

367 (xxii) Towel Ring itemH1Code367 Each Excess(+) Full Conversion INR

368 (xxiii) Soap dish itemH1Code368 Each Excess(+) Full Conversion INR

369 (xxiv) Tumbler Holder itemH1Code369 Each Excess(+) Full Conversion INR

370 (xxv) Toilet Paper Holder itemH1Code370 Each Excess(+) Full Conversion INR

371 (xxvi) Glass Shelf 22" itemH1Code371 Each Excess(+) Full Conversion INR

372 (xxvii) Corner glass shelf with bracket itemH1Code372 Each Excess(+) Full Conversion INR

373 (xxviii) Flush Valve complete with 32 mm size control cock & flange itemH1Code373 Each Excess(+) Full Conversion INR

374 C.I Special & PVC Pipes (M962) itemH1Code374

375 1. C.I double shocketted fittings bend such as bend, tee, taper, itemH1Code375

376 (a) 80-200 mm itemH1Code376 Kg Excess(+) Full Conversion INR

377 (b) 250-700 mm itemH1Code377 Kg Excess(+) Full Conversion INR

378 (c) 700-1000 mm itemH1Code378 Kg Excess(+) Full Conversion INR

379 2. C.I double flange fittings such as tee, taper, tailpiece, bend etc itemH1Code379

380 (a) 80-200 mm itemH1Code380 Kg Excess(+) Full Conversion INR

381 (b) 250-700 mm itemH1Code381 Kg Excess(+) Full Conversion INR

382 (c) 700-1000 mm itemH1Code382 Kg Excess(+) Full Conversion INR

383 Spare parts of Hand Pump itemH1Code383

384 Hexagonal Bolt M12x1.75x40mm long common to Marks II & III (M963) itemH1Code384 Each Excess(+) Full Conversion INR

385 Hexagonal Nut M12x1.75mm (M964) itemH1Code385 Each Excess(+) Full Conversion INR

386 Washer M12 (2.5mm thick) (M965) itemH1Code386 Each Excess(+) Full Conversion INR

387 High tensile bolt M10x1.5x40mm long. (M966) itemH1Code387 Each Excess(+) Full Conversion INR

388 Nyloc Nut M10x1.5mm (M967) itemH1Code388 Each Excess(+) Full Conversion INR

389 Handle Axle (Stainless Steel) (M968) itemH1Code389 Each Excess(+) Full Conversion INR

390 Washer for Handle Axle (4mm thick) (M969) itemH1Code390 Each Excess(+) Full Conversion INR

391 Ball Bearing 6204 Z (M970) itemH1Code391 Each Excess(+) Full Conversion INR

392 Spacer for Handle. (M971) itemH1Code392 Each Excess(+) Full Conversion INR

393 Chain with coupling. (M972) itemH1Code393 Each Excess(+) Full Conversion INR

394 Hexagonal Bolt for front Cover M12x1.75mm long. (M973) itemH1Code394 Each Excess(+) Full Conversion INR

395 Nitrile Rubber cup washer for Mark – II & III (M974) itemH1Code395 Each Excess(+) Full Conversion INR

396 Nitrile Sealing ring Mark – II (M975) itemH1Code396 Each Excess(+) Full Conversion INR

397 Nitrile Rubber Seating Big for Lower valve Mark-II (M976) itemH1Code397 Each Excess(+) Full Conversion INR

398 Nitrile Rubber Seating Small for Upper valve Mark-II. (M977) itemH1Code398 Each Excess(+) Full Conversion INR

399 Hexagonal rod coupling M12x1.75x50mm long. (M978) itemH1Code399 Each Excess(+) Full Conversion INR

400 Pump Head Assembly (G.I.) with front cover, Bolt & third plate. (M979) itemH1Code400 Each Excess(+) Full Conversion INR

401 Front cover (G.I.) (M980) itemH1Code401 Each Excess(+) Full Conversion INR

402 Handle Assembly (G.I.) (M981) itemH1Code402 Each Excess(+) Full Conversion INR

403 (a) Water Tank Assembly for Mark – II (G.I.) (M982) itemH1Code403 Each Excess(+) Full Conversion INR

404 (b) Water Tank Assembly for Mark – III (VLOM-65) itemH1Code404 Each Excess(+) Full Conversion INR

405 Stand Assembly (G.I.) Normal. (M983) itemH1Code405 Each Excess(+) Full Conversion INR

406 Stand Assembly (Telescopic) (G.I). (M984) itemH1Code406 Each Excess(+) Full Conversion INR

407 Connecting Rod 3mtr. Long with coupling and nut (Electrogalvanized) (M985) itemH1Code407 Each Excess(+) Full Conversion INR

408 a) Cylinder Assembly complete set for Mark-II (M986) itemH1Code408 Each Excess(+) Full Conversion INR

409 b) Cylinder Assembly complete set for Mark-III (VLOM-65) itemH1Code409 Each Excess(+) Full Conversion INR

410 a) Upper valve Assembly complete set for India Mark-II (M987) itemH1Code410 Each Excess(+) Full Conversion INR

411 b) Upper valve Assembly complete set for India Mark-III (VLOM-65) itemH1Code411 Each Excess(+) Full Conversion INR

412 a) Lower valve Assembly complete set for India Mark-II (M988) itemH1Code412 Each Excess(+) Full Conversion INR

413 b) Lower valve Assembly complete set for IM-III itemH1Code413 Each Excess(+) Full Conversion INR

414 Reducer Cap for Cylinder Mark-II (M989) itemH1Code414 Each Excess(+) Full Conversion INR

415 a) Plunger Rod (S.S.) for Mark – II (M990) itemH1Code415 Each Excess(+) Full Conversion INR

416 b) Plunger Rod (S.S.) for Mark – III itemH1Code416 Each Excess(+) Full Conversion INR

417 Upper valve Guide (G.M.). (M991) itemH1Code417 Each Excess(+) Full Conversion INR

418 Rubber Seat Retainer for Mark-II (M992) itemH1Code418 Each Excess(+) Full Conversion INR

419 Third Plate for Head Assembly (Galanized) (M993) itemH1Code419 Each Excess(+) Full Conversion INR

420 Cylinder Body with brass liner for IM-II with reducer cap for Top and Bottom. (M994) itemH1Code420 Each Excess(+) Full Conversion INR

421 Gun Metal Spacer. (M995) itemH1Code421 Each Excess(+) Full Conversion INR

422 Check valve Guide Mark-II (M996) itemH1Code422 Each Excess(+) Full Conversion INR

423 a) Check Valve Seat for Mark – II (M997) itemH1Code423 Each Excess(+) Full Conversion INR

424 b) Check Valve Seat for Mark – III itemH1Code424 Each Excess(+) Full Conversion INR

425 Nitrile Rubber “O” ring (VLOM-65) (M998) itemH1Code425 Each Excess(+) Full Conversion INR

426 Push Rod for Mark – III (S.S). (M999) itemH1Code426 Each Excess(+) Full Conversion INR

427 Check Nut for Push Rod (S.S.). (M1000) itemH1Code427 Each Excess(+) Full Conversion INR

428 Nitrile Rubber Cup Washer for VLOM-50 (M1001) itemH1Code428 Each Excess(+) Full Conversion INR

429 Nitrile Rubber Sealing Ring for Mark – III VLOM-65 (M1002) itemH1Code429 Each Excess(+) Full Conversion INR

430 Nitrile Rubber Seating Big for Lower Valve MK-II (M1003) itemH1Code430 Each Excess(+) Full Conversion INR

431 Nitrile Rubber Seating Big for Lower Valve M-III VLOM-65) (M1004) itemH1Code431 Each Excess(+) Full Conversion INR

432 Nitrile Rubber Bobbin VLOM-50 (M1005) itemH1Code432 Each Excess(+) Full Conversion INR

433 Nitrile Rubber “O” Ring VLOM-50 (M1006) itemH1Code433 Each Excess(+) Full Conversion INR

434 Nitrile Rubber cone for VLOM-50 (M1007) itemH1Code434 Each Excess(+) Full Conversion INR

435 Nitrile Rubber cone for VLOM-65 (M1008) itemH1Code435 Each Excess(+) Full Conversion INR

436 Nitrile Rubber Centralizer 150mm for (VLOM-65). (M1009) itemH1Code436 Each Excess(+) Full Conversion INR

437 Nitrile Rubber Centralizer 125mm for (VLOM-65). (M1010) itemH1Code437 Each Excess(+) Full Conversion INR

438 Nitrile Rubber Centralizer 150mm for (VLOM-50). (M1011) itemH1Code438 Each Excess(+) Full Conversion INR

439 Nitrile Rubber Centralizer 125mm for VLOM-50 (M1012) itemH1Code439 Each Excess(+) Full Conversion INR

440 Nitrile Rubber Centralizer 100mm for VLOM-50 (M1013) itemH1Code440 Each Excess(+) Full Conversion INR

441 Water Tank Assembly Mark – III VLOM-50 (M1014) itemH1Code441 Each Excess(+) Full Conversion INR

442 Cylinder Assembly Complete set for Mark – III (VLOM-50) (M1015) itemH1Code442 Each Excess(+) Full Conversion INR

443 Upper valve Assembly complete set for IM-III (VLOM-50) (M1016) itemH1Code443 Each Excess(+) Full Conversion INR

444 Lower valve Assembly complete set for IM-III (VLOM-50) (M1017) itemH1Code444 Each Excess(+) Full Conversion INR

445 a) Upper Cap Cylinder Mark – III (VLOM-65) (M1018) itemH1Code445 Each Excess(+) Full Conversion INR

446 b) Upper Cap Cylinder Mark – III (VLOM-50) itemH1Code446 Each Excess(+) Full Conversion INR

447 a) Bottom Cap for Mark – III (VLOM-50) (M1019) itemH1Code447 Each Excess(+) Full Conversion INR

448 b) Bottom Cap for Mark – III (VLOM-65) itemH1Code448 Each Excess(+) Full Conversion INR

449 Follower for IM-III (M1020) itemH1Code449 Each Excess(+) Full Conversion INR

450 Cage for Mark-III (M1021) itemH1Code450 Each Excess(+) Full Conversion INR

451 S.S. Hexagonal Bolt M-6x25mm long. (M1022) itemH1Code451 Each Excess(+) Full Conversion INR

452 Basic rate of standard I.S.I. mark Deep Well Hand Pump for India mark-2, I.S.I. 15500 (Part 2) / 2004 with latest revision including 12mm x 3meter long 8 no. Connecting Rods made of bright bar electro-galvanized fitted with coupler & normal stand assembly ecommended for use with cylinder assembly suitable for bore well dia 100 to 125mm casing pipe. (M1023) itemH1Code452 Each Excess(+) Full Conversion INR

453 Basic rate of UPVC pipe 125mm dia conforming to I.S.I. latest revision is 12818/2016 CML No. 5543459 (M1024) itemH1Code453 Meter Excess(+) Full Conversion INR

454 Basic rate of 32mm G.I. pipe in 3 mtrs. Length (medium) with seamless socket as per relevent B.I.S. specification IS 1239(PART-I)/2004 (M1025) itemH1Code454 Meter Excess(+) Full Conversion INR

455 Providing and Supplying of ISI standard DI specials & fitting with sealing rubber gasket of SBR, complete with cast Iron follower gland & MS nut bolts coated or otherwise protected from rusting and suitable for DI pipescomplete as per IS-9523 class K-12 ( ex factory rates ) inspection charge transportation ,CP extra. (M1027) itemH1Code455

456 Socketed itemH1Code456

457 100 -150 mm dia itemH1Code457 Kg Excess(+) Full Conversion INR

458 200-300 mm dia itemH1Code458 Kg Excess(+) Full Conversion INR

459 350-450 mm dia itemH1Code459 Kg Excess(+) Full Conversion INR

460 500-600 mm dia itemH1Code460 Kg Excess(+) Full Conversion INR

461 700 mm dia itemH1Code461 Kg Excess(+) Full Conversion INR

462 800 mm dia itemH1Code462 Kg Excess(+) Full Conversion INR

463 900 mm dia itemH1Code463 Kg Excess(+) Full Conversion INR

464 1000 mm dia itemH1Code464 Kg Excess(+) Full Conversion INR

465 1100 mm dia itemH1Code465 Kg Excess(+) Full Conversion INR

466 1200 mm dia itemH1Code466 Kg Excess(+) Full Conversion INR

467 Flanged itemH1Code467

468 100 -150 mm dia itemH1Code468 Kg Excess(+) Full Conversion INR

469 200-300 mm dia itemH1Code469 Kg Excess(+) Full Conversion INR

470 350-450 mm dia itemH1Code470 Kg Excess(+) Full Conversion INR

471 500-600 mm dia itemH1Code471 Kg Excess(+) Full Conversion INR

472 700 mm dia itemH1Code472 Kg Excess(+) Full Conversion INR

473 800 mm dia itemH1Code473 Kg Excess(+) Full Conversion INR

474 900 mm dia itemH1Code474 Kg Excess(+) Full Conversion INR

475 1000 mm dia itemH1Code475 Kg Excess(+) Full Conversion INR

476 1100 mm dia itemH1Code476 Kg Excess(+) Full Conversion INR

477 1200 mm dia itemH1Code477 Kg Excess(+) Full Conversion INR

478 RCC ESR (M1030) itemH1Code478

479 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging Consisting of columns, internal and External bracings spaced vertically not More than 4.5 metres centre to centre for ESR having capacity upto 500 cum and Not more than 6m c/c for ESR having Capacity above 500 Cum including Excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all Columns and Bracings including refilling disposing off the surplus stuff with in a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder out side, Stainless Steel lader in contenor, C.I. manhole frame and covers, water level indicators,lightening conductor, G.I. pipe railing around walk way and top slab, providing stair case from ground level to roof level, M.S. Grill gate of 2M height with locking arrangement of approved design, B.B. Masonry chambers for all valves, ventilating shafts, providing and applying three coats of Acrylie emulsion with silicon edditives paint to the structure incluing roof slab, epoxy painting to internal surface and anti-termite treatment for under ground part soft he structure and giving satisfactory water tightness test as per I.S. code. The job to include painting then ame of the scheme and other details on the reservoir as per the directions of Engineer In - Charge. itemH1Code479

480 Notes itemH1Code480

481 The design of the structure be in accordance with relevant I.S. specification (I.S. 3370 - 1965 or revised.) itemH1Code481

482 The design shall satisfy the stipulations as per I.S. 1893 -1984 and I.S.13920/1993 for seismic force and I.S.-11682 / 1985 for R.C.C. staging of over head tanks. itemH1Code482

483 For design having more than 6 columns, suitable bracing is obligatory. itemH1Code483

484 Plain round mild steel bars grade- I conforming to I.S.432 part-I orhigh yield strength deformed bars conforming to I.S. 1786 or I.S. 1139 shall beused, grade- I Imild steel bars will not be allowed itemH1Code484

485 Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. itemH1Code485

486 These rates include providing M.S. ladder for E.S.R.s upto 2 lakh litres capacity and providing spiral stair case for E.S.R. above 2 lakh litres capacity. itemH1Code486

487 Staging shall have to bede signed with stresses of M-200 concrete for ESR. However all RCC construction should be donein M-250. Structures in contact with water shall be designed & casted in M-300 itemH1Code487

488 These rates are including the cost of up lift pressure if any and entire dewatering during execution. Incase of water logging are a where water is struck at shallow depth, extra provision of dewatering shall be made as per site condition. itemH1Code488

489 All conditions given in the Member Secretary's Circular No. MJP / TS-I / 350 / 1668 dt. 2-8-97 and MJP / S-I / 350 / 2127 dt. 13-7-99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. itemH1Code489

490 75 % part rate shall be payable for reinforcement concrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. itemH1Code490

491 The rates indicated in the table are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow and bypass arrangement. The scope of work, however, includes cost of erecting, laying and jointing of pipe and valves including cost of jointing materials upto 5 M beyond outer face of outer most column ( Cost of pipe, specials and valves is taken as 10% of the cost of ESR as per table). itemH1Code491

492 For ESR upto 500 cum capacity C.I. double flanged pipes upto 300 mm dia shall be provided and C.I. specials shall be used. For ESR above 500 cum capacity C.I. / M.S. pipe assembly with minimum 8 mm thickness upto 500 mm dia and minimum 10 mm thickness above 500 mm dia can be used with proper anti-corrosive epoxy treatment from in side and out side. itemH1Code492

493 Below mentioned rates are for foundation swith individual footing with bearing capacity of 20 tonnes per square metre. For raft foundations, these rates shall be increased by 7.5% where safe bearing capacity (SBC) is 5 MT per sqm and by 5 % where SBC is more than 5MT / sqm and upto 10 MT / sqm. This % of 5 % or 7. 5 % is applicable for estimation of amount of lumpsum item of ESR. For extra item due to change from individual foundation to raft, actual increase in concrete and steel be paid as per relevant DSR item. itemH1Code493

494 The rate shall be increased by 30 % for bearing piles upto depth of 10 M and for further increased in depth by 5 M each, it shall be increased by another 10%. These rates are applicable where raft is not feasible. For pile foundations sulphate resistant cement shall only beused. Single pile for the column is not permitted, group of piles shall be designed with pile cap for each column of ESR. itemH1Code494

495 The rates are applicable for staging height of 12 M. These rates shall be increased or decreased for per metre variation in this staging height as below : itemH1Code495

496 12 to 16 M staging - 2% per metre itemH1Code496

497 16 to 20 M staging - 3% per metre itemH1Code497

498 20 M and above - 4% per metre itemH1Code498

499 For 17 M staging height, percentage calculation will be like below : itemH1Code499

500 12 to 16 M --- 4 x 2 = 8% itemH1Code500

502 For 21 M staging height, percentage calculation will be like below : itemH1Code502

503 12 to 16 M --- 4 x 2 = 8% itemH1Code503

506 Following rates are for seismic zone III. For zone IV, these rates shall be increased by 5% and for zone II, these rates shall be decreased by 5%. Concerned Executive Engineer shall confirm the seismic zone for the scheme from seismic zone splan before estimation and adopt appropriate rates as per actual seismic zones. (Seismic maps attached in this CSR). itemH1Code506

507 Notes itemH1Code507

508 Conditions from Sr.No.1 to 10 shall form a part and parcel of the tender and must be included in the draft tender papers for works of R.C.C. E.S.R. itemH1Code508

509 Conditions from Sr.No.11 to 16 are for estimation purpose only and shall not appear in the tender. itemH1Code509

510 Rates for RCC ESRs itemH1Code510

511 Upto 25,000 litres itemH1Code511 Litre Excess(+) Full Conversion INR

512 Cost of 25,000 litres capacity itemH1Code512 Job Excess(+) Full Conversion INR

513 Add for capacity above 25,000 upto 50,000 litres itemH1Code513 Litre Excess(+) Full Conversion INR

514 Cost of 50,000 litres capacity itemH1Code514 Job Excess(+) Full Conversion INR

515 Add for capacity above 50,000 upto 75,000 litres itemH1Code515 Litre Excess(+) Full Conversion INR

516 Cost of 75,000 litres capacity itemH1Code516 Job Excess(+) Full Conversion INR

517 Add for capacity above 75,000 upto 1,00,000 litres itemH1Code517 Litre Excess(+) Full Conversion INR

518 Cost of 1,00,000 litres capacity itemH1Code518 Job Excess(+) Full Conversion INR

519 Add for capacity above 1,00,000 upto 1,50,000 litres itemH1Code519 Litre Excess(+) Full Conversion INR

520 Cost of 1,50,000 litres capacity itemH1Code520 Job Excess(+) Full Conversion INR

521 Add for capacity above 1,50,000 upto 2,00,000 litres itemH1Code521 Litre Excess(+) Full Conversion INR

522 Cost of 2,00,000 litres capacity itemH1Code522 Job Excess(+) Full Conversion INR

523 Add for capacity above 2,00,000 upto 2,50,000 litres itemH1Code523 Litre Excess(+) Full Conversion INR

524 Cost of 2,50,000 litres capacity itemH1Code524 Job Excess(+) Full Conversion INR

525 Add for capacity above 2,50,000 upto 3,00,000 litres itemH1Code525 Litre Excess(+) Full Conversion INR

526 Cost of 3,00,000 litres capacity itemH1Code526 Job Excess(+) Full Conversion INR

527 Add for capacity above 3,00,000 upto 4,00,000 litres itemH1Code527 Litre Excess(+) Full Conversion INR

528 Cost of 4,00,000 litres capacity itemH1Code528 Job Excess(+) Full Conversion INR

529 Add for capacity above 4,00,000 upto 5,00,000 litres itemH1Code529 Litre Excess(+) Full Conversion INR

530 Cost of 5,00,000 litres capacity itemH1Code530 Job Excess(+) Full Conversion INR

531 Add for capacity above 5,00,000 upto 7,50,000 litres itemH1Code531 Litre Excess(+) Full Conversion INR

532 Cost of 7,50,000 litres capacity itemH1Code532 Job Excess(+) Full Conversion INR

533 Add for capacity above 7,50,000 upto 10,00,000 litres itemH1Code533 Litre Excess(+) Full Conversion INR

534 Cost of 10,00,000 litres capacity itemH1Code534 Job Excess(+) Full Conversion INR

535 Add for capacity above 10,00,000 upto 15,00,000 litres itemH1Code535 Litre Excess(+) Full Conversion INR

536 Cost of 15,00,000 litres capacity itemH1Code536 Job Excess(+) Full Conversion INR

537 Add for capacity above 15,00,000 upto 20,00,000 litres itemH1Code537 Litre Excess(+) Full Conversion INR

538 Cost of 20,00,000 litres capacity itemH1Code538 Job Excess(+) Full Conversion INR

539 RCC GSR AND SUMP (M1031) itemH1Code539

540 Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container,including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. itemH1Code540

541 Anti –termite treatment shall be given for under ground portion of the structure. itemH1Code541

542 Notes itemH1Code542

543 The design shall be in accordance with various relevant I.S. specification (I.S.456/2000,I.S.875-1987,I.S.3370-1965 or revised.) itemH1Code543

544 Only M.S. bars grade I conforming to I.S. 432 part-I or high yield strength deformed bars conforming to I.S. 1786 or I.S.1139 shall be used.Grade- II M.S. bars shall not be used. itemH1Code544

545 Entire structure shall be in M-300 only. itemH1Code545

546 The scope of pipe assembly work shall be upto 5 metre beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. itemH1Code546

547 The G.S.R. / Sump above 15 lakh litres capacity shall be in two compartment. itemH1Code547

548 The Job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by Engineer-in-charge. If up lifts considered in design, then these rates shall be increased by 7.5%. itemH1Code548

549 G.S.R. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. Sump well includes cost of suction pit required at bottom. itemH1Code549

550 For pipe diameters upto 300mm only CIpipes and CI specials shall be used. For pipe diameters above 300mm, M.S. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside. itemH1Code550

551 Cost of pump house is not included in these rates. itemH1Code551

552 Above rates are applicable for Seismic Zones 2, 3 and 4. itemH1Code552

553 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of G.S.R. sand sump still satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. itemH1Code553

554 10% shall be added for sump if over head pump house is proposed. itemH1Code554

555 Note: Conditions from Sr.No.1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of R.C.C .GSRs and sumps. itemH1Code555

556 Rates for RCC GSRs and Sumps itemH1Code556

557 Upto 25,000 litres itemH1Code557 Litre Excess(+) Full Conversion INR

558 Cost of 25,000 litres capacity itemH1Code558 Job Excess(+) Full Conversion INR

559 Add for capacity above 25,000 upto 50,000 litres itemH1Code559 Litre Excess(+) Full Conversion INR

560 Cost of 50,000 litres capacity itemH1Code560 Job Excess(+) Full Conversion INR

561 Add for capacity above 50,000 upto 75,000 litres itemH1Code561 Litre Excess(+) Full Conversion INR

562 Cost of 75,000 litres capacity itemH1Code562 Job Excess(+) Full Conversion INR

563 Add for capacity above 75,000 upto 1,00,000 litres itemH1Code563 Litre Excess(+) Full Conversion INR

564 Cost of 1,00,000 litres capacity itemH1Code564 Job Excess(+) Full Conversion INR

565 Add for capacity above 1,00,000 upto 1,50,000 litres itemH1Code565 Litre Excess(+) Full Conversion INR

566 Cost of 1,50,000 litres capacity itemH1Code566 Job Excess(+) Full Conversion INR

567 Add for capacity above 1,50,000 upto 2,00,000 litres itemH1Code567 Litre Excess(+) Full Conversion INR

568 Cost of 2,00,000 litres capacity itemH1Code568 Job Excess(+) Full Conversion INR

569 Add for capacity above 2,00,000 upto 3,00,000 litres itemH1Code569 Litre Excess(+) Full Conversion INR

570 Cost of 3,00,000 litres capacity itemH1Code570 Job Excess(+) Full Conversion INR

571 Add for capacity above 3,00,000 upto 5,00,000 litres itemH1Code571 Litre Excess(+) Full Conversion INR

572 Cost of 5,00,000 litres capacity itemH1Code572 Job Excess(+) Full Conversion INR

573 Add for capacity above 5,00,000 upto 10,00,000 litres itemH1Code573 Litre Excess(+) Full Conversion INR

574 Cost of 10,00,000 litres capacity itemH1Code574 Job Excess(+) Full Conversion INR

575 Addforcapacityabove10,00,000upto15,00,000 litres itemH1Code575 Litre Excess(+) Full Conversion INR

576 Cost of 15,00,000 litres capacity itemH1Code576 Job Excess(+) Full Conversion INR

577 Add for capacity above 15,00,000 litres itemH1Code577 Litre Excess(+) Full Conversion INR

578 Note: 10% shall be added over the cost of GSR for sump where over head pump house is proposed. itemH1Code578

579 Unconventional Water Treatment Plant (M1032) itemH1Code579

580 Designing (aesthetically), providing and constructing high rate Unconventional Water Treatment Plant i.e. Simplified Water Treatment Plant consisting of Civil works including cost of providing and applying epoxy paint to inside surface of water retaining structures in contact with chlorine and providing anti-termite treatment to entire structure below ground level, ceramic tiles for floring, Acrylic emulsion with silicon additives paint from outside stainless steel railing, mechanical and electrical components of various sub-works as given below : including necessary hydraulic testing, structural testing and trial for 3 months, etc. complete as directed by Engineer-in-charge (turn-key job) works. itemH1Code580

581 Aeration fountain itemH1Code581

582 Inlet arrangements itemH1Code582

583 Mixing channel with ventury flume and flow measuring arrangement itemH1Code583

584 Inlet channel itemH1Code584

585 Flocculator- Conforming to I.S. 7208-1974 (Type-C) with detention period of 30 minutes itemH1Code585

586 Tube settlers-Designing, fabricating and constructing Tube Settlers with square or any other shaped tube like Circular, Cheveron, Hexagonal etc .having proven performance itemH1Code586

587 Rapid sand gravity filters - All valve shall be glandless. itemH1Code587

588 Filter house itemH1Code588

589 Chemical house itemH1Code589

590 Alum tanks- 2Nos. with mixing, carrying and dosing arrangements with piping. itemH1Code590

591 100 kg chlorine cylender for capacity upto 5MLD and Chlorine tonner for capacity above 5 MLD. itemH1Code591

592 TCL solution tank with mixing, carrying and dosing arrangement with piping. itemH1Code592

593 Bypass arrangement itemH1Code593

594 External and internal electrification itemH1Code594

595 Laboratory equipments itemH1Code595

596 Wash water tanks of capacity equal to12 minutes to wash specified number of filter beds at time at 600 lit / m2/m under head of 12m at under drain. itemH1Code596

597 Wash water pumps with 100% standby itemH1Code597

598 Air blowers capable of delivering 600 LMP per square metre of free air of filter area at 0.4 Kg / sqcm at the under drains (100 % standby). Air blowers shall be adopted for WTP having capacity more than 3 MLD only. Below 3 MLD capacity, Air blowers shall not be adopted. itemH1Code598

599 Pure water sump of capacity equal to 1 hour pumping capacity. itemH1Code599

600 Pure water pump house over the sump / by the side of sump. itemH1Code600

601 Drainage arrangements itemH1Code601

602 Alum store itemH1Code602

603 Sanitary block with necessary water supply and drainage arrangements and internal WBM roads. itemH1Code603

604 These rates are applicable for seismic zones 2, 3 and 4. itemH1Code604

605 Rates given below are inclusive of uplift pressure if any and dewatering during the entire work. itemH1Code605

606 All RCC structures shall be constructed in M-250. Structures in contact with water shall be in M-300. itemH1Code606

607 Unconventional Treatment Plants less than 1 MLD capacity shall not be constructed. itemH1Code607

608 All the Structural Steel Works / Fabrications are to be provided with application of Hot Dip Zinc coating according to specification as per IS 4759:1996 (Reafirmed 2006). itemH1Code608

609 Note: Conditions from Sr. No. 1 to 28 shall form a part and parcel of the tender and must be included in draft tender papers for the work of unconventional treatment plants. itemH1Code609

610 Unconventional Water Treatment Plant itemH1Code610

611 Fixed cost for 1 MLD itemH1Code611 P.Job Excess(+) Full Conversion INR

612 Add for capacity above 1 MLD upto 2 MLD itemH1Code612 P.MLD Excess(+) Full Conversion INR

613 Cost of 2 MLD treatment plant itemH1Code613 P.Job Excess(+) Full Conversion INR

614 Add for capacity above 2 MLD upto 3 MLD itemH1Code614 P.MLD Excess(+) Full Conversion INR

615 Cost of 3 MLD treatment plant itemH1Code615 P.Job Excess(+) Full Conversion INR

616 Conventional Water Treatment Plant (M1033) itemH1Code616

617 Designing (aesthetically), providing constructing and commissioning Conventional Water Treatment Plant consisting of all Civil, Mechanical and Electrical works including cost of providing and applying epoxy paint to inside surface of water retaining structures in contact with chlorine and providing antitermite treatment to entire structure below ground level, mechanical and electrical components of various sub-works as given below, including necessary hydraulic testing, structural testing, equipment testing and trial run for a period of 3 months, etc. complete as directed by Engineer-in-charge (turn-key job). itemH1Code617

618 Aeration Fountain- Plan are a not less than 0.625 square metre per MLD itemH1Code618

619 Ventury Flume - With necessary devices, consisting of simple mechanical indicator. (Pedestal type gauge) itemH1Code619

620 Flash Mixer-Rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec -1, vane mixer type conforming to I.S. 7090 of 1985. itemH1Code620

621 Flocculator – Conforming to I.S.7208-1974 (Type-C) with detention period of 30 minutes. itemH1Code621

622 Clarifier - Horizontal flow circular tank, detention period 2-5 hours, overflow rate 30 cubic metre per square metre per day (to be specified), Weir loading not more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to I.S. No. 10313-1982. itemH1Code622

623 Rapid Sand Filter sand Filter House-Filter designed for filteration rate of 5,000 litres per square metre per hour, minimum 2 beds for plant upto 10 MLD, for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width. itemH1Code623

624 FilterSand-Effective size 0.45 to 0.70mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75M, free board 50cm, gravel 0.45M in depth, sand and gravel conforming to I.S. 8491 (i)-77, back wash by air wash, stand ard appurtenances (to be specified), rate of flow controller, filter gauge, sand expansion gauge, etc. itemH1Code624

625 Wash Water Tank-Capacity to be specified and suitable to supply water to wash 2 filter units at a time where the units are 4 or more. itemH1Code625

626 Wash Water Pumps- Capacity to fill water tank in 1 hour with 100% standby. itemH1Code626

627 Air Blowers-Capable of delivering 600 LMP per square metre of free air, of filter area at 0.4kg / sqcm at the under drains (100% standby). itemH1Code627

628 Chemical House in Two Storeys itemH1Code628

629 Ground floor to accommodate 7 days' alum requirement and sundry storage. itemH1Code629

630 First floor to accommodate alum and lime tanks. etc. itemH1Code630

631 Solution tanks-Minimum 3 tanks (one for preparation, second for dosing and third as standby), each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30M, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device (constant head device, strength of solution upto 10% only) conforming to I.S. 9222 Part-I 1979. itemH1Code631

632 Pure Water Sump and Sump House. itemH1Code632

633 Capacity of sump – One hour of designed flow. itemH1Code633

634 Pump House- Pump house of required size over the sump or by the side. itemH1Code634

635 Store House-Suitable for alum storage of three months' requirement in monsoon with 10% extra capacity for other sundry articles. itemH1Code635

636 Vacuum feed type Chlorinators- Make tobe approved by MJP. itemH1Code636

637 Conforming to I.S. 10533 - A Part-II 1983 itemH1Code637

638 Rate for withdrawal itemH1Code638

639 Temperature Kg. of Chlorine discharge Degree 'C' per day (Cylinders) itemH1Code639

640 45 67 Tonnes itemH1Code640

644 27&Above 18.70 28.12 315 itemH1Code644

645 Chlorinator equipment and container room to conform to I.S. 10553 Part-I 1983. itemH1Code645

646 100% standby shall be provided. itemH1Code646

647 By pass arrangements - C.I. or M.S. pipes. itemH1Code647

648 Disposal of waste from WTP: Safe disposal arrangement to near by Nala including cost of pipe itemH1Code648

649 For WTP of Capacity 30 MLD and more additional arrangement for backwash water recycle shall be provided, including sump, pupming machinary,rising main etc complete itemH1Code649

650 Drainage arrangements – RCC pipes up to plot boundary. itemH1Code650

651 Electrical installation – Both internal and external including entire plant area. itemH1Code651

652 Laboratory equipment –As per requirement (to be specified during tendering). itemH1Code652

653 Sanitary blocks – Carpet area -15 square metre minimum upto 25 Mld and 25 square metre above 25 Mld. itemH1Code653

654 Administrative block and internal road-To accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and WBM road to connect all units from main gate of plot. itemH1Code654

655 Rates given below are inclusive of up lift pressure if any and dewatering during entire work. itemH1Code655

656 All pipes condutes channels with20%overloading itemH1Code656

657 These rates are applicable for seismic zones 2, 3 and 4. itemH1Code657

658 All RCC structures shall be constructed in M-300. itemH1Code658

659 Note: Conditions from Sr. No. 1 to 22 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants (proposed). itemH1Code659

660 Conventional Water Treatment Plant itemH1Code660

661 Above 3 MLD to Upto 5 MLD itemH1Code661 P.MLD Excess(+) Full Conversion INR

662 Cost of 5 MLD treatment plant itemH1Code662 P.Job Excess(+) Full Conversion INR

663 Add for capacity above 5MLD upto 10 MLD itemH1Code663 P.MLD Excess(+) Full Conversion INR

664 Cost of 10 MLD treatment plant itemH1Code664 P.Job Excess(+) Full Conversion INR

665 Add for capacity above 10 MLD upto 20 MLD itemH1Code665 P.MLD Excess(+) Full Conversion INR

666 Cost of 20 MLD treatment plant itemH1Code666 P.Job Excess(+) Full Conversion INR

667 Add for capacity above 20 MLD upto 50 MLD itemH1Code667 P.MLD Excess(+) Full Conversion INR

668 Cost of 50 MLD treatment plant itemH1Code668 P.Job Excess(+) Full Conversion INR

669 Add for capacity above 50 MLD upto 100 MLD itemH1Code669 P.MLD Excess(+) Full Conversion INR

670 Cost of 100 MLD treatment plant itemH1Code670 P.Job Excess(+) Full Conversion INR

671 Add for capacity above 100 MLD itemH1Code671 P.MLD Excess(+) Full Conversion INR

672 GPT/HYGPT : Drilling by Rotary drill machine of size 300mm & 400mm dia with T.C. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of E/I (Basic rates) (M1034) itemH1Code672

673 300 mm dia for GPT itemH1Code673 Meter Excess(+) Full Conversion INR

674 400 mm dia for HYGPT itemH1Code674 Meter Excess(+) Full Conversion INR

675 HYDT : Cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site (Basic rates) (M1035) itemH1Code675

676 From 0-50 meter itemH1Code676 Meter Excess(+) Full Conversion INR

677 From 51-125 meter itemH1Code677 Meter Excess(+) Full Conversion INR

678 DT : Basic rates for 125/115 mm dia Drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of Engineer Incharge (Basic rates) (M1037) itemH1Code678

679 Drillig upto 30 mtr Depth below G. L. in Rural Area itemH1Code679 Meter Excess(+) Full Conversion INR

680 Drilling beyond 31 mtr upto 60 mtr below G. L. in Rural Area itemH1Code680 Meter Excess(+) Full Conversion INR

681 Trenchless (M1038) itemH1Code681

682 Installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation ,shoring / strutting etc manual shielded excation ,lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length ) itemH1Code682

683 from 900 mm to 1000 mm dia itemH1Code683

684 In Soft soil itemH1Code684 Meter Excess(+) Full Conversion INR

685 In Hard soil itemH1Code685 Meter Excess(+) Full Conversion INR

686 In sandy Soil itemH1Code686 Meter Excess(+) Full Conversion INR

687 In Stone Soil itemH1Code687 Meter Excess(+) Full Conversion INR

688 from 1000 mm to 1200 mm dia itemH1Code688

689 In Soft soil itemH1Code689 Meter Excess(+) Full Conversion INR

690 In Hard soil itemH1Code690 Meter Excess(+) Full Conversion INR

691 In sandy Soil itemH1Code691 Meter Excess(+) Full Conversion INR

692 In Stone Soil itemH1Code692 Meter Excess(+) Full Conversion INR

693 Above 1200 mm to 1500 mm dia itemH1Code693

694 In Soft soil itemH1Code694 Meter Excess(+) Full Conversion INR

695 In Hard soil itemH1Code695 Meter Excess(+) Full Conversion INR

696 In sandy Soil itemH1Code696 Meter Excess(+) Full Conversion INR

697 In Stone Soil itemH1Code697 Meter Excess(+) Full Conversion INR

698 Installation of product pipe by Auger Boring method including making of entry and exit pits all related civil works like excavation ,shoring /strutting etc shielded excavation ,through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length ) itemH1Code698

699 upto 300 mm dia itemH1Code699

700 In Soft soil itemH1Code700 Meter Excess(+) Full Conversion INR

701 In Hard soil itemH1Code701 Meter Excess(+) Full Conversion INR

702 In sandy Soil itemH1Code702 Meter Excess(+) Full Conversion INR

703 In Stone Soil itemH1Code703 Meter Excess(+) Full Conversion INR

704 Above300 mm to 450 mm dia itemH1Code704

705 In Soft soil itemH1Code705 Meter Excess(+) Full Conversion INR

706 In Hard soil itemH1Code706 Meter Excess(+) Full Conversion INR

707 In sandy Soil itemH1Code707 Meter Excess(+) Full Conversion INR

708 In Stone Soil itemH1Code708 Meter Excess(+) Full Conversion INR

709 Above 450 mm to 600 mm dia itemH1Code709

710 In Soft soil itemH1Code710 Meter Excess(+) Full Conversion INR

711 In Hard soil itemH1Code711 Meter Excess(+) Full Conversion INR

712 In sandy Soil itemH1Code712 Meter Excess(+) Full Conversion INR

713 In Stone Soil itemH1Code713 Meter Excess(+) Full Conversion INR

714 Above 600 mm to 900 mm dia itemH1Code714

715 In Soft soil itemH1Code715 Meter Excess(+) Full Conversion INR

716 In Hard soil itemH1Code716 Meter Excess(+) Full Conversion INR

717 In sandy Soil itemH1Code717 Meter Excess(+) Full Conversion INR

718 In Stone Soil itemH1Code718 Meter Excess(+) Full Conversion INR

719 Installation of product pipe by Guided Auger Boring method including making of entry and exit pits all related civil works like excavation ,shoring /strutting etc shielded excavation ,through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length ) itemH1Code719

720 upto 300 mm dia itemH1Code720

721 In Soft soil itemH1Code721 Meter Excess(+) Full Conversion INR

722 In Hard soil itemH1Code722 Meter Excess(+) Full Conversion INR

723 In sandy Soil itemH1Code723 Meter Excess(+) Full Conversion INR

724 In Stone Soil itemH1Code724 Meter Excess(+) Full Conversion INR

725 Above300 mm to 450 mm dia itemH1Code725

726 In Soft soil itemH1Code726 Meter Excess(+) Full Conversion INR

727 In Hard soil itemH1Code727 Meter Excess(+) Full Conversion INR

728 In sandy Soil itemH1Code728 Meter Excess(+) Full Conversion INR

729 In Stone Soil itemH1Code729 Meter Excess(+) Full Conversion INR

730 Above 450 mm to 600 mm dia itemH1Code730

731 In Soft soil itemH1Code731 Meter Excess(+) Full Conversion INR

732 In Hard soil itemH1Code732 Meter Excess(+) Full Conversion INR

733 In sandy Soil itemH1Code733 Meter Excess(+) Full Conversion INR

734 In Stone Soil itemH1Code734 Meter Excess(+) Full Conversion INR

735 Above 600 mm to 900 mm dia itemH1Code735

736 In Soft soil itemH1Code736 Meter Excess(+) Full Conversion INR

737 In Hard soil itemH1Code737 Meter Excess(+) Full Conversion INR

738 In sandy Soil itemH1Code738 Meter Excess(+) Full Conversion INR

739 In Stone Soil itemH1Code739 Meter Excess(+) Full Conversion INR

740 Providing and Supplying ISI Mark CI/ D/F reflux valves ( Non return Valves ) of following dia inspection charges unloading from railway wagon ,loading into truck transportation upto department stores / site unloading stacking etc. complete reflux valve as per IS 5312 Part I (1984) (M1039) itemH1Code740

741 Without byepass arrangement - PN-1 itemH1Code741

742 50 MM itemH1Code742 Each Excess(+) Full Conversion INR

743 65 MM itemH1Code743 Each Excess(+) Full Conversion INR

744 80 MM itemH1Code744 Each Excess(+) Full Conversion INR

745 100 MM itemH1Code745 Each Excess(+) Full Conversion INR

746 125 MM itemH1Code746 Each Excess(+) Full Conversion INR

747 150 MM itemH1Code747 Each Excess(+) Full Conversion INR

748 200 MM itemH1Code748 Each Excess(+) Full Conversion INR

749 250 MM itemH1Code749 Each Excess(+) Full Conversion INR

750 300 MM itemH1Code750 Each Excess(+) Full Conversion INR

751 350 MM itemH1Code751 Each Excess(+) Full Conversion INR

752 400 MM itemH1Code752 Each Excess(+) Full Conversion INR

753 450 MM itemH1Code753 Each Excess(+) Full Conversion INR

754 500 MM itemH1Code754 Each Excess(+) Full Conversion INR

755 600 MM itemH1Code755 Each Excess(+) Full Conversion INR

756 700 MM itemH1Code756 Each Excess(+) Full Conversion INR

757 750 MM itemH1Code757 Each Excess(+) Full Conversion INR

758 800 MM itemH1Code758 Each Excess(+) Full Conversion INR

759 900 MM itemH1Code759 Each Excess(+) Full Conversion INR

760 1000 MM itemH1Code760 Each Excess(+) Full Conversion INR

761 1100 MM itemH1Code761 Each Excess(+) Full Conversion INR

762 1200 MM itemH1Code762 Each Excess(+) Full Conversion INR

763 With byepass arrangement - PN-1 itemH1Code763

764 50 MM itemH1Code764 Each Excess(+) Full Conversion INR

765 65 MM itemH1Code765 Each Excess(+) Full Conversion INR

766 80 MM itemH1Code766 Each Excess(+) Full Conversion INR

767 100 MM itemH1Code767 Each Excess(+) Full Conversion INR

768 125 MM itemH1Code768 Each Excess(+) Full Conversion INR

769 150 MM itemH1Code769 Each Excess(+) Full Conversion INR

770 200 MM itemH1Code770 Each Excess(+) Full Conversion INR

771 250 MM itemH1Code771 Each Excess(+) Full Conversion INR

772 300 MM itemH1Code772 Each Excess(+) Full Conversion INR

773 350 MM itemH1Code773 Each Excess(+) Full Conversion INR

774 400 MM itemH1Code774 Each Excess(+) Full Conversion INR

775 450 MM itemH1Code775 Each Excess(+) Full Conversion INR

776 500 MM itemH1Code776 Each Excess(+) Full Conversion INR

777 600 MM itemH1Code777 Each Excess(+) Full Conversion INR

778 700 MM itemH1Code778 Each Excess(+) Full Conversion INR

779 750 MM itemH1Code779 Each Excess(+) Full Conversion INR

780 800 MM itemH1Code780 Each Excess(+) Full Conversion INR

781 900 MM itemH1Code781 Each Excess(+) Full Conversion INR

782 1000 MM itemH1Code782 Each Excess(+) Full Conversion INR

783 1100 MM itemH1Code783 Each Excess(+) Full Conversion INR

784 1200 MM itemH1Code784 Each Excess(+) Full Conversion INR

785 Without byepass arrangement - PN-1.6 itemH1Code785

786 50 MM itemH1Code786 Each Excess(+) Full Conversion INR

787 65 MM itemH1Code787 Each Excess(+) Full Conversion INR

788 80 MM itemH1Code788 Each Excess(+) Full Conversion INR

789 100 MM itemH1Code789 Each Excess(+) Full Conversion INR

790 125 MM itemH1Code790 Each Excess(+) Full Conversion INR

791 150 MM itemH1Code791 Each Excess(+) Full Conversion INR

792 200 MM itemH1Code792 Each Excess(+) Full Conversion INR

793 250 MM itemH1Code793 Each Excess(+) Full Conversion INR

794 300 MM itemH1Code794 Each Excess(+) Full Conversion INR

795 350 MM itemH1Code795 Each Excess(+) Full Conversion INR

796 400 MM itemH1Code796 Each Excess(+) Full Conversion INR

797 450 MM itemH1Code797 Each Excess(+) Full Conversion INR

798 500 MM itemH1Code798 Each Excess(+) Full Conversion INR

799 600 MM itemH1Code799 Each Excess(+) Full Conversion INR

800 With byepass arrangement - PN-1.6 itemH1Code800

801 50 MM itemH1Code801 Each Excess(+) Full Conversion INR

802 65 MM itemH1Code802 Each Excess(+) Full Conversion INR

803 80 MM itemH1Code803 Each Excess(+) Full Conversion INR

804 100 MM itemH1Code804 Each Excess(+) Full Conversion INR

805 125 MM itemH1Code805 Each Excess(+) Full Conversion INR

806 150 MM itemH1Code806 Each Excess(+) Full Conversion INR

807 200 MM itemH1Code807 Each Excess(+) Full Conversion INR

808 250 MM itemH1Code808 Each Excess(+) Full Conversion INR

809 300 MM itemH1Code809 Each Excess(+) Full Conversion INR

810 350 MM itemH1Code810 Each Excess(+) Full Conversion INR

811 400 MM itemH1Code811 Each Excess(+) Full Conversion INR

812 450 MM itemH1Code812 Each Excess(+) Full Conversion INR

813 500 MM itemH1Code813 Each Excess(+) Full Conversion INR

814 600 MM itemH1Code814 Each Excess(+) Full Conversion INR

815 Providing double flange sluice valve ( Size 50 mm to 1200 mm ) confirming for IS - 2906 / 14846 including worn gear arrangements as per test pressure stailess steel spindle , caps transportation etc. all complete . itemH1Code815

816 With byepass arrangement - PN-1 itemH1Code816

817 50 MM itemH1Code817 Each Excess(+) Full Conversion INR

818 65 MM itemH1Code818 Each Excess(+) Full Conversion INR

819 80 MM itemH1Code819 Each Excess(+) Full Conversion INR

820 100 MM itemH1Code820 Each Excess(+) Full Conversion INR

821 125 MM itemH1Code821 Each Excess(+) Full Conversion INR

822 150 MM itemH1Code822 Each Excess(+) Full Conversion INR

823 200 MM itemH1Code823 Each Excess(+) Full Conversion INR

824 250 MM itemH1Code824 Each Excess(+) Full Conversion INR

825 300 MM itemH1Code825 Each Excess(+) Full Conversion INR

826 350 MM itemH1Code826 Each Excess(+) Full Conversion INR

827 400 MM itemH1Code827 Each Excess(+) Full Conversion INR

828 450 MM itemH1Code828 Each Excess(+) Full Conversion INR

829 500 MM itemH1Code829 Each Excess(+) Full Conversion INR

830 600 MM itemH1Code830 Each Excess(+) Full Conversion INR

831 700MM itemH1Code831 Each Excess(+) Full Conversion INR

832 750 MM itemH1Code832 Each Excess(+) Full Conversion INR

833 800 MM itemH1Code833 Each Excess(+) Full Conversion INR

834 900 MM itemH1Code834 Each Excess(+) Full Conversion INR

835 1000 MM itemH1Code835 Each Excess(+) Full Conversion INR

836 1100 MM itemH1Code836 Each Excess(+) Full Conversion INR

837 1200MM itemH1Code837 Each Excess(+) Full Conversion INR

838 Without byepass arrangement - PN-1 itemH1Code838

839 50 MM itemH1Code839 Each Excess(+) Full Conversion INR

840 65 MM itemH1Code840 Each Excess(+) Full Conversion INR

841 80 MM itemH1Code841 Each Excess(+) Full Conversion INR

842 100 MM itemH1Code842 Each Excess(+) Full Conversion INR

843 125 MM itemH1Code843 Each Excess(+) Full Conversion INR

844 150 MM itemH1Code844 Each Excess(+) Full Conversion INR

845 200 MM itemH1Code845 Each Excess(+) Full Conversion INR

846 250 MM itemH1Code846 Each Excess(+) Full Conversion INR

847 300 MM itemH1Code847 Each Excess(+) Full Conversion INR

848 350 MM itemH1Code848 Each Excess(+) Full Conversion INR

849 400 MM itemH1Code849 Each Excess(+) Full Conversion INR

850 450 MM itemH1Code850 Each Excess(+) Full Conversion INR

851 500 MM itemH1Code851 Each Excess(+) Full Conversion INR

852 600 MM itemH1Code852 Each Excess(+) Full Conversion INR

853 700MM itemH1Code853 Each Excess(+) Full Conversion INR

854 750 MM itemH1Code854 Each Excess(+) Full Conversion INR

855 800 MM itemH1Code855 Each Excess(+) Full Conversion INR

856 900 MM itemH1Code856 Each Excess(+) Full Conversion INR

857 1000 MM itemH1Code857 Each Excess(+) Full Conversion INR

858 1100 MM itemH1Code858 Each Excess(+) Full Conversion INR

859 1200MM itemH1Code859 Each Excess(+) Full Conversion INR

860 Providing double flange sluice valve confirming for IS - 2906 / 14846 including worn gear as per test pressure stailess steel spindle , caps transportation etc. all complete FOR Rateincluding all taxes . . itemH1Code860

861 Without byepass arrangement - PN-1.6 itemH1Code861

862 50 MM itemH1Code862 Each Excess(+) Full Conversion INR

863 65 MM itemH1Code863 Each Excess(+) Full Conversion INR

864 80 MM itemH1Code864 Each Excess(+) Full Conversion INR

865 100 MM itemH1Code865 Each Excess(+) Full Conversion INR

866 125 MM itemH1Code866 Each Excess(+) Full Conversion INR

867 150 MM itemH1Code867 Each Excess(+) Full Conversion INR

868 200 MM itemH1Code868 Each Excess(+) Full Conversion INR

869 250 MM itemH1Code869 Each Excess(+) Full Conversion INR

870 300 MM itemH1Code870 Each Excess(+) Full Conversion INR

871 350 MM itemH1Code871 Each Excess(+) Full Conversion INR

872 400 MM itemH1Code872 Each Excess(+) Full Conversion INR

873 450 MM itemH1Code873 Each Excess(+) Full Conversion INR

874 500 MM itemH1Code874 Each Excess(+) Full Conversion INR

875 600 MM itemH1Code875 Each Excess(+) Full Conversion INR

876 700MM itemH1Code876 Each Excess(+) Full Conversion INR

877 750 MM itemH1Code877 Each Excess(+) Full Conversion INR

878 800 MM itemH1Code878 Each Excess(+) Full Conversion INR

879 900 MM itemH1Code879 Each Excess(+) Full Conversion INR

880 1000 MM itemH1Code880 Each Excess(+) Full Conversion INR

881 1100 MM itemH1Code881 Each Excess(+) Full Conversion INR

882 1200MM itemH1Code882 Each Excess(+) Full Conversion INR

883 With byepass arrangement - PN-1.6 itemH1Code883

884 50 MM itemH1Code884 Each Excess(+) Full Conversion INR

885 65 MM itemH1Code885 Each Excess(+) Full Conversion INR

886 80 MM itemH1Code886 Each Excess(+) Full Conversion INR

887 100 MM itemH1Code887 Each Excess(+) Full Conversion INR

888 125 MM itemH1Code888 Each Excess(+) Full Conversion INR

889 150 MM itemH1Code889 Each Excess(+) Full Conversion INR

890 200 MM itemH1Code890 Each Excess(+) Full Conversion INR

891 250 MM itemH1Code891 Each Excess(+) Full Conversion INR

892 300 MM itemH1Code892 Each Excess(+) Full Conversion INR

893 350 MM itemH1Code893 Each Excess(+) Full Conversion INR

894 400 MM itemH1Code894 Each Excess(+) Full Conversion INR

895 450 MM itemH1Code895 Each Excess(+) Full Conversion INR

896 500 MM itemH1Code896 Each Excess(+) Full Conversion INR

897 600 MM itemH1Code897 Each Excess(+) Full Conversion INR

898 Design and Supply of V -wire screen laterals suitable for infiltration Galleryas per site condition and detail provided End connection suitable flange excluding taxes and transportation . (M1040) itemH1Code898

899 Dia - 06 inch ( 150 mm ) itemH1Code899 Meter Excess(+) Full Conversion INR

900 ID - 153 mm OD -167 mm itemH1Code900

901 Screen thickness - 07 mm itemH1Code901

902 Slot - 1.00 mm itemH1Code902

903 MOC - Low Carbon Galvenised steel itemH1Code903

904 Length - 5 mtr. itemH1Code904

905 Dia - 08 inch ( 200 mm ) itemH1Code905 Meter Excess(+) Full Conversion INR

906 ID - 205 mm OD -221mm itemH1Code906

907 Screen thickness - 08 mm itemH1Code907

908 Slot - 1.00 mm itemH1Code908

909 MOC - Low Carbon Galvenised steel itemH1Code909

910 Length - 5 mtr. itemH1Code910

911 Dia - 10 inch ( 250 mm ) itemH1Code911 Meter Excess(+) Full Conversion INR

912 ID - 256 mm OD -276mm itemH1Code912

913 Screen thickness - 10 mm itemH1Code913

914 Slot - 1.00 mm itemH1Code914

915 MOC - Low Carbon Galvenised steel itemH1Code915

916 Length - 5 mtr. itemH1Code916

917 Dia - 12 inch ( 300 mm ) itemH1Code917 Meter Excess(+) Full Conversion INR

918 ID - 306 mm OD -326 mm itemH1Code918

919 Screen thickness - 10 mm itemH1Code919

920 Slot - 1.00 mm itemH1Code920

921 MOC - Low Carbon Galvenised steel itemH1Code921

922 Length - 5 mtr. itemH1Code922

923 Dia - 14 inch ( 350 mm ) itemH1Code923 Meter Excess(+) Full Conversion INR

924 ID - 338 mm OD -363 mm itemH1Code924

925 Screen thickness - 12.5 mm itemH1Code925

926 Slot - 1.00 mm itemH1Code926

927 MOC - Low Carbon Galvenised steel itemH1Code927

928 Length - 5 mtr. itemH1Code928

929 Supplying all materials, labours, equipments for lowering 125mm dia blue UPVC casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site (Basic Rate). (M1041) itemH1Code929 Meter Excess(+) Full Conversion INR

930 Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction E/I (Basic Rate). (M1042) itemH1Code930

931 Supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of E/I (Basic Rate). (M1043) itemH1Code931 Each Excess(+) Full Conversion INR

932 Supplying labour and equipments including 125mm dia G.I. Cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction E/I (The cap will be the property of department) (Basic Rate). (M1044) itemH1Code932 Each Excess(+) Full Conversion INR

933 Supplying all materials, labours, equipments for constructing P.C.C. (1:2:4) circular platform around drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design, etc. all complete including carriage of materials (Basic Rate). (M1045) itemH1Code933 Each Excess(+) Full Conversion INR

934 Supplying all materials, labours and equipments for constructing P.C.C. (1:2:4) drain as per UNICEF design etc. all complete including carriage of materials (Basic Rate). (M1046) itemH1Code934 Meter Excess(+) Full Conversion INR

935 Supplying extra Deep well Hand Pump Complete sets with Cylinder Assembly & Connecting Rod (12 Pcs) as per IS : 15500 Part-2/2004 (Basic Rate). (M1047) itemH1Code935

936 Supply of 200mm dia x 3.00m long UPVC casing pipe conferming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carrigae (Basic Rate). (M1048) itemH1Code936 Meter Excess(+) Full Conversion INR

937 Supply of 200mm dia ribbed Screen pipe conferming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carrigae (Basic Rate). (M1049) itemH1Code937

938 Supply of 125mm dia ribbed Screen pipe conferming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carrigae (Basic Rate). (M1050) itemH1Code938 Meter Excess(+) Full Conversion INR

939 Supplying all tools, equipments and labour and lowering 32 mm dia medium quality G.I. pipe in drilled tube well in 3 Mtrs. Length all complete as per dirction E/I including carriage of materials (Basic Rate). (M1051) itemH1Code939

940 Supplying all tools, Labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of E/I including carriage of materials (Basic Rate). (M1052) itemH1Code940 Each Excess(+) Full Conversion INR

941 Supplying all materials, labours and fixing India mark II Hand Pump with all accessories all complete job as per direction of E/I including carriage of materials (Basic Rate). (M1053) itemH1Code941 Each Excess(+) Full Conversion INR

942 Design, Supply, Installation testing & Commissioning of packaged water treatment plants (Unconventional type) of different capacity with (20 hours operation) comprising of lamella clarifier, Static Mixture Flocculation Tank (SMET), Multi grade filter (MGF) with best quality filter media, Lime/ coagulant/polymer dosing system hypo chloride dosing system, Raw water feed pump/clear water transfer pump (either or), sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with MCB panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratory facility should be from a reputed manufacturer/ authorized distribution / authorized dealer conforming to relevant IS codes and certified by ISO-9001-2008 & 14001, It also include cost of civil foundation, including clarified water tank internal connecting pipe line from Raw Water inlet to CWR and applying internal epoxy paint on the supply equipment All the prices are exclusive of GST, Allied structure/items which are site specific such as external electrification, approach road, foot Bridge, cofferdam, compound wall, SCADA and automation, CWR pumps etc are to be considered extra. (M1054) itemH1Code942

943 Packaged lamella clarified type WTP with MGF capacity in MLD. itemH1Code943

944 (i)0.2 itemH1Code944 job Excess(+) Full Conversion INR

945 (ii)0.3 itemH1Code945 job Excess(+) Full Conversion INR

946 (iii)0.4 itemH1Code946 job Excess(+) Full Conversion INR

947 (iv)0.5 itemH1Code947 job Excess(+) Full Conversion INR

948 (v)0.6 itemH1Code948 job Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information