REPAIRS TO ROAD AND ALLIED SERVICES IN THE AOR AGE B/RI UNDER GE (SOUTH) UDHAMPUR

Repair to pot holes any depth , not exceeding 1 sqm each including sweeping free from dust and mud or scoring sunken surfaces in roads , paths etc , cutting around edges to atleast 25mm in depth , making good by filling in screened and graded material /road metal , watering and well ramming (including supply of material) completed, all as specified and as directed

Preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a priming / tack coat on un-surfaced water bound macadam surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 10 Kg per Ten Square Metre with tar boiler, complete, all as specified and as directed.

Material and labour for premix bituminous, macadam with 4% binder content (paving bitumen VG-30) by weight of total mix by hot mix process laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm or less Note: Repair to pot holes any depth not exc 1 sqm each and depression in patch over 50mm, shall also be carried out under this item.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing cleaned black top surface with bitumen primer @ 05Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix with hydrostatic sensor paver finisher rolled and compacted with 8 to 12 tonne power roller to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.

Preparation of butuminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on road/pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machineall as per manufacturer's instruction, complete all as specified and directed. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA-972 fixed with and incl MS stud of suitable size as per manufactures instructions., complete all as specified and directed.

Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tones water resistant.

Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by the Engineer-in-Charge.

Prepration of old brick, stone and concrete surfaces exceeding 10 cms width or grith and applying one coats of synthetic enemal paint complete all as specified and as directed.