Procurement of 01 no 33KV RMU at 132KV S/S Tilhar, Shahjahanpur

Total Price for Supply of Equipments and Material Q -1

Total Price for Supply of Equipments and Material Q -1

Total Price for Electrical works (Q-1+Q-2)

% Discount , if any on Electrical works

NET Price for Electrical works (A)

Total Price for Civil Works (Q-3)

Discount / rebate , if any on Civil Works.

NET Price for Civil works (B)

Net Lum Sum Bid Price after Discount (A+B)

GST @ 18% on (A+B)

Net Lum Sum Bid Price after Discount with 18% GST

Seal of Company

Designation ……………

Name of Bidder

SCHEDULE – Q-1

Schedule of Quantities & Prices for 33 KV RMU Bays at 132kV Substation Tilhar (ETD-Shahjahanpur) (total 01 Nos.) Against Specn. No. ESD-670

Supply of 33 KV,630A,25kA/3s, Outdoor(IP55) type 4-way Compact Secondary GIS , as per Technical specification

Supply of: Pre-Wired Wall-Mount Cabinet for mounting the HMI Industrial HMI 15,6” FullHD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Cabinet-mounted devices - Intel Core i5 7300U 2.6 GHz - Dual core Connector 24 VDC - 3-pin; female - Cage clamps 3.31 mm² SO-DIMM DDR4, 8192 MB Windows 10 IoT Enterprise 2019 LTSC - 64-bit - Value - Multilingual - License OEM's(ABB/Siemens/Schneider) SCADA License with tag license/ IEC 61850 Master/Client HMI Function license - for SCADA Smart Box HMI Unit HMI Scope and Functions: Allow monitoring functionality depending on access rights such as: - Single Line Diagram (SLD) with Dynamic Bus Bar Coloring along with CB Open/Close status, CB rack-in/rack-out status, Earth Switch Open/Close status as fetched from Relays/IED’s - Breaker Control Operation (Opening & Closing of Circuit Breakers) (Optional) & if control is configured inside the Relays - Management of Alarm & Events - Visualization of measurements (current, voltage, power etc.) (as available from Numerical Relays) Ethernet Switch for 11kV Numerical Relay & Networking Cables and accessories Din-Rail Type unmanaged Fast-Ethernet Switch (to be installed inside the switchgear) Cat6 LAN Cable from Relay to Ethernet switches and Fiber Optic Cable between swithgear/RMU end switches to Operator Control Room Pre-wired Wall mount HMI as required, shall also be in contractor's scope and the work shall be completed in toto.

Supply of 1Cx630 sq. mm. high conductivity Copper conductor XLPE armoured 33KV cable

Supply of 3Cx300 sq. mm. high conductivity Copper conductor XLPE armoured 33KV cable

Supply of Outdoor Type 1Rx1CX630 sq. mm Termination Kit for 33 KV XLPE cable for all three phases

Supply of Outdoor Type 1Rx3CX300 sq. mm Termination Kit for 33 KV XLPE cable

Supply of Indoor Type Screen connector Touch proof 1Rx1CX630sqmm for all three phases suitable for 33kV RMU

Supply of Indoor Type Screen connector Touch proof 1Rx3CX300sqmm suitable for 33kV RMU

Supply of Optical fibre approach cable 24 fibre with all necessary accessories including HDPE Pipe (complete in all respect)

Hardware Set for 24 Fibre (DWSM,G-625-D) Fibre Optic approch Cable

Supply of 36kV Bus Isolator with Post Insulator

Supply of 36kV Line Isolator with Post Insulator

Copper Control Cable (Unarmoured)

Lattice Type Structures

Earthing Materials

Metering Cubicle for ABT Meter

ABT Meter 0.2s Class (SAMAST Complient)

Pilfer proofing of the cable with G.l. pipe of following sizes complete with cutting bending & fixing of pipe alongwith making threads, elbow and other required material for 33KV CT & PT in switchyard to caengy meter in control room. All material labour and T&P to be provided by the contractor.

Integration of C&R Panel with existing SAS Scada

ACSR Panther Conductor

PG Clamp for ACSR Panther to Panther Conductor

PG Clamp for ACSR Mooser to Panther Conductor

Copper Bond

LED FLOOD LIGHT LUMINARIES (TYPE-1, 150 Watt) as per technical specification

Mandatory Spares:

3 nos. mechanical Bushing with O Ring as mandatory spare for onsite replacement.

Tripping coil – 1nos & Closing coil – 1nos.

Spring Charging motor – 1nos.

9kG SF6 gas cylinder – 1 nos.

Feeder Protection Relay

TOTAL (Without GST)

Seal of Company

Designation ……………………………………………………………………….

Name of Bidder

SCHEDULE- Q-2

Schedule of Quantities & Prices for Erection, Handling, Testing & Commissioning Charges for 01 nos. RMU Bays at 132kV substation Tilhar (Shahjahanpur) Against Specn. No. ESD-670

Installation,testing & commissioning of 33 KV,630A,25kA/3s, Outdoor(IP55) type 4-way Compact Secondary GIS as detailed in schedule Q-1

Erection, Installation, Testing & Commissioning of: Pre-Wired Wall-Mount Cabinet for mounting the HMI as detailed in Q-1

laying of 1Cx630 sq. mm. high conductivity Copper conductor XLPE armoured 33KV cable

laying of 3Cx300 sq. mm. high conductivity Copper conductor XLPE armoured 33KV cable

Erection, Installation, Testing & Commissioning of Outdoor Type 1Rx1CX630 sq. mm Termination Kit for 33 KV XLPE cable for all three phases

Erection, Installation, Testing & Commissioning of Outdoor Type 1Rx3CX300 sq. mm Termination Kit for 33 KV XLPE cable

Erection, Installation, Testing & Commissioning of Indoor Type Screen connector Touch proof 1Rx1CX630sqmm for all three phases suitable for 33kV RMU

Erection, Installation, Testing & Commissioning of Indoor Type Screen connector Touch proof 1Rx3CX300sqmm suitable for 33kV RMU

laying of Optical fibre approach cable 24 fibre with all necessary accessories including HDPE Pipe (complete in all respect)

laying/Installation ofHardware Set for 24 Fibre (DWSM,G-625-D) Fibre Optic approch Cable

Erection of 33kV bus Isolator with post insulator

Erection of 33kV Line Isolator with post insulator

laying of 2 core x2.5 Sqmm control cable

laying of 4 core x2.5 Sqmm control cable

laying of 6 core x2.5 Sqmm control cable

Erection of Lattice Type Structures

Earthing & Grounding (75x10 MS Flat, 50x6 MS Flat & 25x6 MS Flat) along with connection with main grid

Installation of Metering Cubicle

Installation of ABT Meter inside Metering Cubicle

Eraction/Installtion of GI Pipe 2'' Dia and 1'' Dia

Stringing of ACSR Panther Conductor along with hardware fittings and Copper Bond

Installation of LED FLOOD LIGHT LUMINARIES (TYPE-1, 150 Watt) as per technical specification

Total (Without GST)

Seal of Company

Full Signature ……………………………………………………………………….

Designation ……………………………………………………………………….

BILL OF QUANTITY (Civil Works)

FOR CONSTRUCTION OF 01 No. 33 KV RMU BAY AT 132 KV SUB STATION TILHAR,SHAHJAHANPUR.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. as directed by Engineer-in-charge,for all kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kind of soils

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying cement concrete 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) All work up to plinth level excluding the cost of centering, shuttering and finishing.

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.

Centering and shuttering including strutting, propping etc for foundations,footing and bases of column etc for mass concrete including removal of shuttering

Centering and shuttering including strutting, propping Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc etc. and removal of form for

Mild steel and Medium Tensile steel bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand).

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)

Neat cement punning. :

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Supply of 28 mm. dia M.S. Anchor bolts (conforming to IS 266) 900 mm. long with base plate (75x75x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work

Fixing and grouting 28 mm and above dia bolts in proper alignment level and setout with help of a template complete including supply of all labour & T&P etc. required for proper completion of the work.(labour rates only) .

Supply of 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mm long with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work.

Fixing and grouting 25 mm and below dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) .

Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only )

Fixing of template in position level and alignment for grouting of Anchor bolt in Main structure structure (labour rate only).

Fixing of template in position level and alignment for grouting of Anchor bolt in auxiliary structure (labour rate only).

Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only)

Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete.

4 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC

Painting letters & number over cable trench cover or other places with the help of stencils including painting of base of 150 mm. dia of one coat of primer and two coats of superior quality synthetic enamel paint size of letter to be 60 mm. x 10 mm. including cost of all materials labour and T&P etc. required for proper completion of the work including placing of Trench covers in required position

Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge.

Total

Rupees- (GST EXTRA)

Conditions:

Conditions:

Tenderers are advised to visit the site of work and make themselves acquainted with the site conditions. No claim whatsoever shall be entertained after submission of tender.

Quantities are approximate and may vary upto any extent on either side as per requirement of the site conditions or may not be executed at all for which no extra claim shall be entertained

All above works shall be executed as per U.P.P.W.D/ U.P.P.T.C.L specification or as directed by Engineer-In-charge

The work may be carried in energized s/s area having high voltage installations contractor must employee trained Supervisor & Labor to work in such electrical hazardous area. All risk to men & materials shall be contractor responsibility

Contractor shall register his labour engaged in construction work in the office of Dy. Labour Commissioner (Hkou ,oa vU; lfUuekZ.k deZdkj ¼fu;kstu rFkk lsok ‘krZ fofu;eu½ vf/kfu;e] 1996)

Testing of material if any required shall be born by the contractor. Nothing shall be paid extra by the department.

Contractor has to put up all relevant drawing to SE (Civil) for approval at his own cost; nothing shall be paid extra for it

As per G.O No. 622/23-12-2012-2. Audit/08 TC dt. 08 June 2012, Contractor has to deposit extra Security/Performance guarantee, if the tendered rates are found below to the department rates.

All civil work shall be executed according to the approved drawings which shall be submitted by firm and which shall be based on traditional UPPTCL drawings and soil test results. Working drawings shall be submitted by the contractor/firm within least time and get them approved by the S.E(Civil) before starting work. In case the construction drawings are issued/made available by the department 1.5% of the gross value of the particular work will be deducted from the bill.

All the tax liability including GST, shall be borne by contracter/firm as per rule.

Pozzlona Portland cement confirming to IS 1489(Part 1) 1991 of approved quality like ACC,Ultra Tech,Birla or equi.shall only be used.

Following dismentled unserviceable materials shall not be taken back and recoverd from the agency's bill as per following rates;

(a) M.S. Items @ Rs. 29.00 per kg.

(b) Brick work @ 1250.00 per Cum

(c )Brick bats @ Rs. 1050.00/Cum.

(d) Wooden leaf @ 60.00 per sqm

(e) Wood (eaten by white ants) @ 1.00 per kg