DAY TO DAY MAINT TO CERTAIN BLDGS AND ADDN/ALTN OF D AND HQ PLATOON BATHROOM AT IMTRAT UNDER GE (AF) HASIMRA

Amount

Demolition of bricks work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete aritcles, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. (Note:- Reinforcement shall be cut as required to facilitate demolition.)

M&L forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in CM (1:4), complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth and n.exc 10 Sqm on plan and getting out in hard soil, complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and similar work, complete all as specified and directed.

M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M & L for brick work with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls , built in cement mortar (1:6), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick, in cement mortar (1:6) on brick walling or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick (10mm + 5mm) in two coats on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound at top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall, any description and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall, any description and applying two coats of cement base paint, complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces over and including rendering 10mm thick, in cement mortar (1:4), surfaces finished even and rough as in skirting/dado etc incl circular cutting or notching and waste etc, complete all as specified and directed.

M&L for coloured ceramic non skid joint free tiles of size 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm laid over and including 15mm thick screed bed or bedding layer of cement mortar in CM (1:6) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

Takiing down chowkat (with shutter without taking off shutter from the frame) exc 1.5 Sqm n.exc 4 Sqm each, complete all as specified and directed.

Takiing down chowkat (with shutter without taking off shutter from the frame) n.exc 1.5 Sqm each, complete all as specified and directed.

Taking down shutter of any description area exc 1.00 sqm but not exc 2.00 sqm, complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauge etc divided into suqares with plain chamfered or rounded, mittered edges of framing plain, chamfered or rounded in window/ventilator, complete all as specified and directed.

S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F aluminium anodised sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

S&F butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, complete all as specified and directed.

S&F butt hinges of size 75mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

S&F in repair butt hinges of size 100mm, medium weight, cold rolled, complete all as specified and directed.

S&F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 150mm long aluminium anodised handle, cast type, complete all as specified and directed.

S&F 100mm long aluminium handle, cast type anodised, complete all as specified and directed.

M&L preparation of new or previously untreated wooden surface any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed.

S&F 4mm thick sheet glass,ordinary quality and glazing with oil putty or fixed with beads in square n. exc 0.5 Sqm in each pane, complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs landings, lintel beam and similar work ,vertical or to batter for rough finished flat surfaces of concrete, complete all as specified and directed.

M&L for RCC (nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, lintels and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like, complete all as specified and directed.

S & F mild steel TMT bars 6mm to 8mm dia (Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in repair, complete all as specified and directed.

M&L for providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc., complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (die cast) body and weight between 60 to 80 kg, complete all as specified and directed.

S&F in repair vitreous china squatting pan,"Orissa pattern" white, size 580mm x 440mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti -syphonage pipe etc., complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet ball valve, float and handle and connection to pipes, complete all as specified and directed.

S & F in repairs vitreous china wash down water closet (EWC) pan (pedestal pattern), white with P or S trap (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S&F vitreous china urinal bowl white flat back of size 465 x 355 x 265mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.

S & F in repair vitreous china ware counter wash hand basin white, oval bowl size 485 x 330 x 145mm, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

M&L for cutting chases, pinning in making good to facing where required and pointing in CM (1:3) to ends to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills , sunshades,shelves, lintesl etc and cutting chases for cncealed water tubing or conceales conduit wiring etc and making goor cutting not exc 10cm girth in brick walls, complete all as specified and directed.

S&F 16mm dia CPVC pipes SDR-11 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, end plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F 20mm dia CPVC pipes SDR-11 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, End plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F of CPVC 16mm dia brass threaded elbow for SDR 11 pipe, complete all as specified and directed

S&F of CPVC 16mm dia brass threaded tee for SDR 11 pipe, complete all as specified and directed

S&F of CPVC 16mm dia male brass threaded adaptor for SDR 11 pipe, complete all as specified and directed

S&F in repair 15mm bore, stop valve, fancy type, chromium plated, with long shank and cup, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F of 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy, crutch or butterfly handle, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair of 32mm bore and 800mm long PVC corrugated/collapsible waste pipe, one end with socket, complete all as specified and directed.

S&F in repair of 40mm/50mm bore and 800mm long PVC urinal waste pipe, complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to any type of pipe or union, complete all as specified and directed.

S&F 20mm bore CPVC gate valves/ball valves fitted with both ends of pipe,complete all as specified and directed

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, compelete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm bore pipe, with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed.

S&F 100mm size grating round of PTMT (Minimum weight -25 gms), complete all as specified and as directed.

S & F in repair stainless steel soap dish, fixed to wall with chromium plated brass screws, complete all as specified and directed.

M&L 100mm dia cast iron floor trap / Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4), compelete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old CGI sheet of any thickness complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old PGI sheet of any thickness , complete all as specified and directed.

Fixing only plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.

M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605mm x 605mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S & F 110mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall , complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.

S & F 75mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall , complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Taking down eaves gutters and PVC rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

S&F 75mm bore PVC (SWR) junction, single, (single Y) equal or unequal, complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, chromium plated, with long shank and cup fancy type screwed down, high pressure, with crown head, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated, angle cock, screwed with iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore pillar taps fancy type, swan neck, two way, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repair shower rose 125mm size, brass, chromium plated, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for pedestal pan, complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back of size 630x 450mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.

S & F in repair for 32mm dia waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight -45 gms), complete all as specified and directed.

S&F in repair 110mm steel grating, fixed with white cement, complete all as specified and directed.

S&F in repair 75mm steel grating, fixed with white cement, complete all as specified and directed.

S&F in repair 110mm dia gratings of PTMT (Minimum weight 25gms), complete all as specified and directed.

S&F for 40mm bore low density waste pipe for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75cm long suitable for steel sink waste, complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), complete all as specified and directed.

Fixing only in repairs, flushing cistern and flushing pipe (exclusive of brackets), complete all as specified and directed.

S&F in repair sinks made of stainless steel with draining board 1mm thick with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm, complete all as specified and directed.

S & F in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight - 210 gms), complete all as specified and directed.

S&F in repair PVC/plastic lid/cover for 500/1000/2000 Ltrs capacity rotational moulded polyethylene water storage tanks, complete all as specified and directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F GI galvanised steel water tubing and connection medium grade 15mm bore with all fitting fixed to wall or in ceiling, complete all as specified and directed..

Re-fixing old steel tubing and connection, 20mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F GI galvanised steel water tubing and connection medium grade 20mm bore with all fitting fixed to wall or in ceiling, complete all as specified and directed..

S&F in repairs 20mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F 110mm bore, PVC (SWR) vent cowl, complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, old size, burnt clay bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons and wall/dado etc, complete all as specified and directed.

M&L for machine cut kota stone slab flooring and shelves 20-25mm thick laid over cement screed bed of 15mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. Note: Kota stone slab to be provided to treads of steps shall be in one piece with rounding off edge on front face.

M&L for rounding to edges of stone slabs kota stone/marble one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

Roughening surface of old concrete roof by picking, sweeping clean and washing down with water using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated : (i) 20mm thick screed bed in CM (1:4) on existing roof surface true to level using extra cement mixed with liquid water proofing compound as per manufacturer instructions. (ii) Applying one coat of bituminous primer @ 0.30 Ltr/Sqm. (iii) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric/matt weighing not less than 160gms per Sqm having softening point not less than 150° C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. (iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017. (iv) Applying one coat of aluminium paint @0.11 Kg/Sgm over APP membrane surface (v) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (vi) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work. (vii) The work shall be executed through authorised applicators of original manufacturer only.

M&L for applying silicon sealent on cracks/joints in walls, cills, jambs, roofs etc. at any location, complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for drain etc., complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified and directed

S&F for 125 x 60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F for 105X60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M&L for PCC (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) as in door and windows frame, any size single or double rebated, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors, ceiling in CM (1:3), complete all as specified and directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20mm dia and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick including PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sqmm as earth wire connected to common earth dully for one light point / one fan point/one bell/buzzer point controlled by one, one way swtich, complete all as specified and directed. Note: - (i) Unit quoted rate shall deemed to be included for cutting chases for conduit and sinking for boxes and making good of wall floors etc as per exsting.

All as per item No 130.00 here-in before but on independent board, complete all as specified and directed

All as per item No 130.00 here-in before but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire, complete all as specified and directed.

All as per item No 130.00 here-in before but with 2.5 Sqmm PVC copper multi stranded cable FRLSH type for one switch socket combination 6 pin 5/16 Amp point on independent board including PVC cable 2.5 Sqmm FRLSH type copper multi stranded conductor as earth wire, complete all as specified and directed.

S&F piano switch, flush button 5 Amp single pole one way 230 volts white finish, complete all as specified and directed.

S & F switch socket combination, flush type, 5 pin, type 6 Amps complete all as specified and directed

S & F switch socket combination, flush type, 6 pin, type 16 Amps complete all as specified and directed.

S & F socket outlet, flush type, 5 pin 5 Amp, complete all as specified and directed.

S&F in ceiling rose of size 65 x 50mm, surface bakelite, three terminal, completes all as specified and directed.

S&F power unit suitable for load max up to 3.5 KW including sockets 25 Amps, and six module box for mounting of power unit and power socket, complete as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed.

S&F LED street light fittings 30 watt 230 v AC outdoor type with high pressure dia cast aluminium housing and heat-resistant complete with driver, lamp bracket with impact and corrision resistant, IP 65/66 protection, complete all as specified and directed.

S & F water tight bulk head fitting, comprising of connector galvanised cast iron back plate, weather proof enameled gallery, with electronic driver, (latest design), 10 W, upper PVC body, complete all as specified and directed. (Make: Havells Cat Part No. HEXAFT10WLED857SSYMBOPC/Bajaj Cat Part No. BIBWP 10W LED/Crompton Cat Part No. LBHP-10-CDL)

S & F in replacement angle holder, insulated body, with back plate for conduit fittings, complete all as specified and directed.

S&F LED lamp 9 watt for angle holder, complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver, LED tube light of 10watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, completes all as specified and directed. (Make : Havells Cat Part No. LUMILINEPLUSBS10WLED865SPCSS/Bajaj Cat Part No. BCLSB 10 WH/Philips Cat Part No. BN021 LED12S 6500 PSU GR)

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4 Sqmm drawn in and including heavy duty PVC conduit not less than 20mm size including4 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC conduit and its accessories is deemed to be included in the unit quoted rate.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn in and including heavy duty PVC conduit not less than 20mm size including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC conduit and its accessories is deemed to be included in the unit quoted rate.

S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 08 way, single pole and neutral, with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed.

S&F in repair MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘B’ series, fixed in proper position, complete all as specified and directed.

S&F in repair MCB Single Pole & Neutral (SPN) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

M &L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3cm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized wire of size 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part -1, including necessary excavation and earth work, P.C.C (1:3:6) type C-1 with 50mm thick Pre-cast R.C.C. (1:2:4) type B1 cover slab (reinforced with 8mm dia deformed bar 15cm C/C both ways and suitable handle of 10mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with funnel and 20mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, Gl earth wire protected by 15mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismantling of old unserviceable earthing of any descriprtion, complete all as specified and as directed. Note : Proper earthing pit should be provided with pit cover.

S&F exhaust fan, steel body AC, single phase, 230V of size 300mm sweep with, blades, and frame and louvers including cutting wall for fixing exahaust fan of size 300mm sweep and making good the opening in CM (1:4) or PCC (1:2:4) type B1 as required at site including taking down old exhaust fan, any size and deposited to AGE E/M store yard, completes all as specified and directed.

S&F water heater stoarage type, capacity 50 litres (minimum 2 Kw heating element) BEE 5 star rated, 8 ber pressure rating, vartical hanging including proper hanging arrangement on wall, cold/hot water connection of required lenghth (not more than 3 mtr), hot water outlet line, complete all as specified and as directed.

Note: An amount of Rs.58,192.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S I P GROUP (BID ID -3120652)

M/S. VINITA CONSTRUCTION (BID ID -3123260)

M/S BISHAL ENTERPRISES (BID ID -3113162)

SHRI SURAJIT SIKDER (BID ID -3120620)