Balance Work of Construction for Government Degree College Kalakote, Rajouri.

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator) over area exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50 mts. and lift upto 1.5 m, disposed soil to be levelled and neatly dressed

Removal / disposal of surplus excavation earth by mechanical means upto a lead of 1km.

Providing and lying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level. (crushed Stone 40 mm nominal size) 1 cement 4 coarse sand: 8 graded, stone aggregates 40mm size crushed / Nallah Stone.

Providing and lying in position reinforced cement concrete of specified grade excluding the cost of centring and shuttering finishing and reinforcement-All works upto plinth level, 1 cement 1.5 coarse sand:3 graded, stone aggregates 20mm nominal size crushed Stone

Reinforced cemenet concrete work in walls (any thickness), including attached pilasters, buttreses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc upto floor five level excluding cost of centring, shuttering, finishing and reinforcement, in 1 cement 1.5 coarse sand:3 graded, stone aggregates 20mm size Stone aggregate

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed.

Providing and lying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level. 1 cement :3 coarse sand: 6 graded, stone aggregates 20mm size crushed Stone Aggregate.

Brickwork with common burnt clay F.P.S (non modualar) bricks of class designation 75 in superstructure in 1cement : 6 core sand mortar.

Providing and laying damp-proof course 50 mm thick with cement concrete 1: 2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 nominal size) crushed aggregate

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Half brick masonry with bricks of class designation 75 in foundations and plinth, and superstructure upto floor V level in Cement mortar 1:4 (1 cement: 4 coarse sand).

Honey-comb brick work 10/11.4 cm thick with bricks of class designation 75 in cement mortar 1:4 ( 1 cement : 4 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1 cement: 1.5 coarse sand : 3 graded stone aggregates 20mm nominal size.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Cetring and shuttering including strutting, propping etc and removal of the form work for:

Foundation, footing, bases of columns

Suspended floors, roofs, landing, balconies and access platforms.

columns, Pillars,Piers, Abutments, Posts and Struts.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Edge of slabs and break in floors and walls

Under 20 cms wide.

Retaining Walls, Return Walls, walls (any thickness) including attached pilasters, buttresses, plith and string courses etc.

Weather shade, chajjas, corcels etc., including edes.

Stairs, (excluding landings) except spiral staircases

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and lying in position cement concrete of specified grade excluding the cost of centring and shuttering- in R/Walls/Return Walls Etc in 1 cement :5 coarse sand: 10 graded, stone aggregates 40mm size crushed Stone Aggregate.

12 mm Cement plaster of mix I cement: 4 coarse sand

20 mm Cement plaster of mix I cement: 6 coarse sand

15 mm Cement plaster on the rough side of single or half brick wall of mix I cement: 4 coarse sand.

Add or deduct for plaster drip course/groove in plastered surface of moulding to R.C.C. projections.

Making of Grove 12mm x10 mm between Brick and RCC.

Kota stone slab 25 mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick 1 cement: 3 coarse sand and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polising complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 16mm thick Granite of any colour and shape (Area of slab upto 0.5 sqm) gang saw cut mirror polished (pre moulded and pre polished), achine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of aproved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Extra for providing edge moulding to 18 mm thick granite stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Providing and Laying of under layer of Tile Flooring 40 mm thick Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 12.5 mm nominal size, crushed stone aggregate.

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate.

Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations. a) applying a slurry coat of neat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) ,c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound onforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved byEngineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. d With average thickness of 120mm and minimum thickness at khurra as 65 mm.

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of W.C.kitchen and the like consisting of :(I) 1st course of applying cement slurry @ 4.4kg/sqmmixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding ofJunctions of vertical and horizontal surface.(II) lind course of 20mm cement plaster 1:3 (1 cement: 3coarse sand) mixed with water proofing compound in recommended proportions including rounding of Junctionsof vertical and horizontal surface. (Ill) Ill course of applying blown or/ residual bitumenapplied hot at 1.7 kg. per sqm of area. (IV) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 1 OOmm wide and pastedto each other with bitumen @ 1. 7 kg/sqm.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

Coupler

Single tee with door

Making plinth protection 50mm thick of cement concrete1:3:6 1cement: 3 coarse sand: 6 graded Crushed aggregate 20mm nominal size over bed of dry Brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated 25 mm dia (heavy type)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surafce even and smooth complete.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/1 Osqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/1 Osqm)

Providing wood work in frames of doors, windows, clerestory windows and other frameS, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. And length (hold fast lugs or with dash fasteners shall be paid for separtely) Sal Wood

Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. in Second Class Deodar Wood

Providing and fixing Glass panes weighing 13.75 kg/sqm with Deodar wood Fillets.(Area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and Fixing wooden moulded beading to door and windows frames with iron screws, plugs and priming coat on unexposed surfaces etc. complete of second class teak wood 50x 20 mm

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing 35mm thick wire guage shutters using galvanised M.S. wire guage of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows and clerestory windows with ISI marked M.S pressed but hinges bright finished butt hinges of required size with necessary screws, in Second Class Deodar Wood

Providing and fixing stainless steel tower bolt ISI marked of approved make with necessary screws etc. complete :

Providing and fixing stainless steel Aldrops ISI marked of approved make with necessary screws etc. complete :

Providing and fixing stainless steel Handles ISI marked of approved make with necessary screws etc. complete :

Providing and fixing stainless steel hanging double door buffer ISI marked of approved make with necessary screws etc. complete :

Providing and fixing stainless steel Hasp and staples (safety type) ISI marked of approved make with necessary screws etc. complete

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade on new steel work.

Painting with synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. Two or more coats on new work.

Applying priming coat: with cement primer of approved brand and manufacture on smooth sarface )

Carriages of Materials

Sand ( lead 70 Km)

Aggregrate (lead 70 Km)

Bricks Lead ( 35 Km)

Suresh Kumar

M/S Maqsood Ahamed