Andaman Nicobar

Financial Eval

Works

Civil Works - Buildings

03 /EE/CD/CB/2026-27

Chief Engineer Andaman Public Works Department (APWD)

Executive Engineer CD, APWD, Campbell Bay | Nicobars, Andaman And Nicobar Islands

Amount: ₹4.3 LCloses: 25 May 2026Closed

Timeline

Published18 May 2026
Closed25 May 2026
Technical Evaluation27 May 2026
Financial Evaluation10 Jun 2026
Award—

Bids

Percentage

1 Bid10 Jun 2026

#	Company	Amount	Rank	Status
1	M/s J.P Builders 1₹4.4 LAccepted-Finance	₹4.4 L	1	Accepted-Finance L1

Tender Value

₹4.3 L

EMD Value

₹8,594

Closing Date

25 May 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer

Address

Office of the Executive Engineer CD, APWD, Campbell Bay.

Work Description

Renovation of Sub-center at Kamal Basti, Campbell Bay

Tender Information

Tender ID

2026_APWD_23079_1

Reference Number

NIT No. 03 /EE/CD/CB/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

90 days

Location

Executive Engineer CD, APWD, Campbell Bay

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScanned copy of EMD (.pdf)

RequiredScanned copy of Certificate of Work Experience (.pdf)

RequiredScanned copy of Affidavit as per clause 1.2.1 of CPWD 6 on Indian Non Judicial Bond/Stamp paper. (.pdf)

RequiredScanned copy of Certificate of Registration for GST (Good Service Tax). (.pdf)

RequiredScanned copy of 10 (Ten) years Financial Audited Statement of Account from a Charted Accountant (.pdf)

RequiredScanned copy of List of all ongoing work under all Govt. of India Organization in these Islands with (.pdf)

RequiredScanned copy of Undertaking as per clause 1.2.2 of page No. 6. (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹8,594

Important Dates

Last Activity

10 Jun 2026

Published

18 May 2026

Bid Opening

26 May 2026

Download Starts

18 May 2026

Download Ends

25 May 2026

Submission Starts

18 May 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (21 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
1.1	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.	3.6	sqm	3,667.3	₹13,202.28
2Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
2.1	Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	139	kg	138.35	₹19,230.65
3Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
3.1	10 x 60 mm	42	each	141.3	₹5,934.6
4	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.	38	sqm	2,200.35	₹83,613.3
5	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	55	sqm	1,062.15	₹58,418.25
6Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
6.1	Ridges plain (500- 600mm)	9	metre	611.3	₹5,501.7

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.23 MB

Work Item Documents

TenderDoc03.pdf

Tender Documents • 0.78 MB

BOQ_24470.xls

BOQ • 0.35 MB

Instructions-to-bidders.pdf

Additional Documents • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

M/s J.P Builders

1₹4.4 LAccepted-Finance

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
1.1	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.	3.6	sqm	3,667.3	₹13,202.28
2Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
2.1	Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	139	kg	138.35	₹19,230.65
3Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
3.1	10 x 60 mm	42	each	141.3	₹5,934.6
4	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.	38	sqm	2,200.35	₹83,613.3
5	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	55	sqm	1,062.15	₹58,418.25
6Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
6.1	Ridges plain (500- 600mm)	9	metre	611.3	₹5,501.7

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

1.1

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

3.6

sqm

3,667.3

₹13,202.28

2Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

2.1

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

139

138.35

₹19,230.65

3Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

3.1

10 x 60 mm

each

141.3

₹5,934.6

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

sqm

2,200.35

₹83,613.3

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm

1,062.15

₹58,418.25

6Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

6.1

Ridges plain (500- 600mm)

metre

611.3

₹5,501.7