Construction of Councillor ward office Ward no 32 New Shimla SH CO One room with Toilet

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations footings bases of columns etc for mass concrete .including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Suspended floors, roofs, landings, balconies and access platform .including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Random rubble masonary with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 garded stone aggreate 20 mm nominal size) upto plinth level with : Cement Motor 1:6 ( 1 cement : 6 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick 2nd Class D/Wood

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm

Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Stone soling properly hand packed filling interstices with kharanja stone and consolidating with power road roller to the required gradient and comber including spreading, watering and rolling of binding materials moorum or earth etc. complete as per HPPWD specification. 100mm spread thickness (finished work including materials and labour)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 10 mm thick anti skid resistant tiles of approved make and colour using acid and /or alkali resisting mortar bedding and joints filled with acid with acid and/or alkali resisting cement as per IS complete as per the direction of Engineer-in-Charge

Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

8 mm thick tile work in skirting riseres of steps and dado up to 2 mm height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coars sand) and jointed with grey cement slurry @ 3.3 kg/Sqm including pointing in white cement mixed with pigment of matching shade complete marble tiles (Polised)

6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : in cement mortar 1:4 including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete upto all heights in all floor level including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore

Providing and fixing unplasticised P.V.C. Connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing 10 liters vitreous china low level flushing cistern with a pair of C.I or mild steel brackets complete with flushing such as lead valve less syphon, 15 mm nominal size brass ball valve with polythene float CP brass handle unions and coupling for connections with inlet outlet and overflow pipes 40 mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe is to be measured and paid separately)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. The rate includes, octroi, Malkhana , Toll tax , Goods and Service Tax, building and other constrcution worker, welfare cess royalty or any other tax, levy or cess in entertain any claim whatsoever in this respect of the same including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and Fixing 32 mm dia PVC waste pipe for wash basin or sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F G.I / M.I union (15 mm nominal bore) (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P./S.S brass bib cock 15 mm nominal bore for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P./S.S brass stop cock 15 mm nominal bore of approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P./S.S brass pillar tap 15mm (Fifteen millimetre) dia metre for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing CP brass soap dish with CP brass bracket fixed to wooden cleats with brass screws chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing CP Brass towel rail complete with CP brass bracket fixed to wooden plug with CP Brass Chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing brass ball valve (horizontal plunger type)-: 15mm nominal bore for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC floor trap D-plast or equivalent make approved by the Bureau of Indian Standard of self cleaning design including fixing with approved adhesive etc. complete . including cost of cutting making good in the walls and floors complete . 110x90 mm (One hundered ten into ninety millimetre) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Connection pipe 15 mm dia 45 cm long with Brass Union for wash basin & Sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC (B-Type) spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.110 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.75 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.110 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.75 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Collar 110 mm nominal bore (Heavy duty)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Collar 75 mm nominal bore (Heavy duty)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Plain Bend 110 mm (Heavy duty)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F PVC Plain Bend 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing CP grating 100 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Constructing manhole with R.C.C top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement :4 sand :8 graded stone aggregate 40mm nominaLl size), inside plastering 15mm thick with cement mortar 1:3( 1 cement :3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 sand :4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing : with 200mm thick walls of brick masonary of approved quality in cement mortar 1:3 ( 1 cement :3 Sand)

Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5( Along with C.I Cover

Providing and fixing PTMT Ball cock of approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Please Enable Macros to View BoQ information