ADDN ALTN TO TOILET BLOCK LEFT WING OF BLDG NO P 174 CIMT MEG N CENTRE UNDER GE NORTH BANGALORE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed

M&L for plain cement concrete 1:4:8 type D-2, with using 40 mm graded stone aggregates as in foundations and mass concrete etc complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-2 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed

M&L for providing reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in Foundation, including rafts, footings, plinth beam etc complete all as specified and as directed

M&L for Reinforced cement concrete M-25 (design mix) with using 20 mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all as specified and as directed

M&L for providing reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed

M&L for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in col, pillars, piers, posts and struts etc complete all as specified and as directed

M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete etc complete all as specified and as directed

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to slope with rough finished concrete surface etc complete all as specified and as directed

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with Rough finished surfaces of concrete (Flat) etc including edges of roof slab etc complete all as specified and as directed

M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed

M&L for formwork to sides of pillars, posts, struts, piers, col and stanchions, for square, rectangular or polygonal, rough finished surfaces of concrete etc complete all as specified and as directed

S&F powder coated aluminium (of any shade /colour as approved by GE ) as in ventiliators with adjustable including 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm including complete etc all as specified and directed Notes:- i) Cost of aluminium mongery. lock, rubber packing, shall be deemed to include in the quoted rate and nothing extra will be measured and paid,, ii) 4 mm thick Figured glass and 0.36 mm wire cloth, shall be deemed to include in the quoted rate and nothing extra will be measured and paid.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and as directed

S&F Solid PVC door frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F for 100mm butt hinges, heavy weight, Stainless and fixed complete as specified and directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

M&L for framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walks ways, railing framed work of water tanks and similar work etc complete all as specified and as directed

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

All as per item No 22 above but 6 to 8 mm dia etc complete all as specified and as directed

All as per item No 22 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed

Spreading and levelling soil in layers not exc 25 cm thick including watering as required etc complete all as specified and as directed. Note : Soil obtained from excavation will be reused in this item.

M&L for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surface etc all as specified and as directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for Non Skid ceramic tiles coloured 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado / skirting etc complete all as specified and as directed

M&L Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound where ever is reqd as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding / staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for 10 mm cement plastering in CM (1:3) as in horizontal and vertical surface of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg / Sqm reinforced with non woven polyster / HMHDPE matt black finished over compatible primer / bonding bitumen @ 0.40 Litr / Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed. complete all as directed.

Supply only Liquid water proofing compound

M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint over a coat of white wash etc complete all as specified and as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

S&F 20 mm dia bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified Notes : Internal CPVC Pipe line to be concealed in wall of any pattern. Where ever pipe line is passing behind tiles, than quoted rate is incl cutting chases in brick / concrete wall and making good. Nothing extra shall be admissible on this account

S&F 25 mm dia bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed

S&F rotational moulded PVC water storage tank 2000 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore etc complete all as specified and as directed

S & F 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and directed.

S&F EWC with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (Make Cat no 4018 of Prayag of equlavent make of Cera / Hindware / Jaquar)

S&F PVC deo flushing cistern valveless with flushing out vavle flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equlavent make of Cera / Hindware / Jaquar)

S&F white vitreous china one piece wash basin of oval shape of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F Viterous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S & F chromium plated long body bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-08H Neptune series of Prayag or equivalent make of Cera / Hindware / Jaquar)

S & F 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivalent make of Cera / Hindware / Jaquar)

S & F 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make of Cera / Hindware / Jaquar)

S & F 15mm Conceled Stop Cock cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc. (Cat No PIS-10H Neptune series of Prayag or equivalent make of Cera / Hindware / Jaquar)

S&F 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-73 Neptune series of Prayag or equivalent make of Cera / Hindware / Jaquar)

S&F Glass Shelf 500 X125 mm with brass bracket etc complete all as specified and as directed (Make Cat no BEA-45 of Prayag of equivalent make of Cera / Hindware / Jaquar)

S&F Soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag of equivalent make of Cera / Hindware / Jaquar)

S&F Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed Prayag of equivalent make of Cera / Hindware / Jaquar)

S&F Jet spray including fitting etc complete all as specified and as directed Prayag of equivalent make of Cera / Hindware / Jaquar)

S&F SS Grab bar Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag of equivalent make of Cera / Hindware / Jaquar)

S&F Peg set of six (Cat No BEA 30 of Prayag or equivalent make of Cera / Hindware / Jaquar) fixed in wall as per manufacturers instruction etc complete all as specified and as directed

S&F 100mm PVC (SWR) Multi floor trap plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor complete all as specified and directed

As per item no.72 above but 75mm bore pipe complete all as specified and directed

S&F 110mm PVC, SWR pipes, single socketed in any length with rubber rings joint fixed with wall with GI clamp etc complete all as specified and directed

As per item no 74 above but 75 bore pipe complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) bends (any radius) with access door etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) with access door etc complete all as specified and as directed

S&F 75mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 75 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 110 mm dia PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc complete all as specified and as directed .

As per item No 84 above but 75 mm dia bore

S&F 110 mm dia bore PVC (SWR) vent cowls

S&F 75 mm dia bore PVC (SWR) vent cowls

M&L ATT for treating the bottom and sides of excavation at the rate of 5 Ltrs of emulsion per sqm of surface area complete all as specified and as directed

M&L ATT for treating the back fill in contract with foundation at the rate of 7.5 Ltrs of emulsion per Sqm of vertical surface (area of the sub structure in contact with back fill to be measured) etc complete all as specified and as directed

M&L ATT for treating the top surface of filled up earth at the rate of 5 Ltrs of emulsion per square meter of surface complete all as specified and as directed

M&L ATT for treating the soil under plinth protection at the rate of 5 Ltrs of emulsion per square meter of surface complete all as specified and as directed

M&L ATT for treating the soil along with external perimeter of building at the rate of 2.25 Ltrs of emulsion per mtr of the wall etc complete all as specified and as directed

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description and in any position including wall tiltes etc all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) (door and window) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) (door and window) exc. 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15/20/25 mm dia bore incl gate valves etc complete all as specified and as directed

Taking down EWC / IWC / WHB / Flushing cistern / Urinal etc and Removing from side premises etc complete all as specified and as directed

Taking down CP/PTMT (Bib tap/Stop cock/ Angle cock/ Pillar Tap/ Health Faucet/ Looking Mirror / towel Rail / soap dish /floor Trap with Grating etc and Removing from site premises etc complete all as specified and as directed

Dismantling of cast iron or reinforced concrete drain/PVC soil waste pipe up to 150mm dia incl fittings, jointed in cement mortar and taking out trenches if reqired etc complete all as specified and directed

Dismantling water tanks of capacity 1000/2000 ltre capacity incl all fittings such as float valve fitting etc complete all as specified and as directed

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for incl floor tiles incl removing the debries to distance exc 500 mtr but not exc 5.0KM etc complete all as specified and as directed

Demoltion of Reinforced Cement Concrete as in roofs slabs/ floor slab, Column, plinth /Roof/Lintel beam/ Chajja or any other location of any description and in any position not otherwise specifically provided for incl removing the debries to distance exc 500 mtr but not exc 5.0KM etc complete all as specified and as directed Notes. After Demoltion of RCC work, Scrap Iron to be stacked seperately and offered as sch of credit. Quoted rate is inclusive of seperating the reinforcement from RCC.

S&F 200mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors et ccomplete all as specified and directed

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 200mm internal dia of pipe complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories concealed type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. (a) One light / fan point controlled by one switch

As per item No. 112 above but for One 3 pin socket out let 5 Amps on independent board

As per item No. 112 above but for One 3 pin socket out let 5 A on same board

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories concealed run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 112 to 115 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be included in point wiring.

S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLAB 20 WH LED P or equivalent Makes & model in Havells/Phillips/CG

S&F switch piano flush type single pole one way 5amps

S&F of Switch socket combination 2 in 1 , 5 Amps flush type all as specified and as directed

S&F in repairs of MCB SPN 240 volts 32/40 Amps complete all as specified and as directed

S&F in repairs of MCB single pole 240 volts 10 / 16 / 20 / 32 Amps complete all as specified and as directed

S&F in repairs of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in repairs of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

Removing of old existing unsv submain wiring complete and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with one run 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC casing / caping all as specified and as directed. Note:- 3 runs of cable, one run of casing / caping will be measured as unit length.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

Supply and fixing 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or Equivalent Makes of Philips / CG / Havells.

S&F GI Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. Make of Philips / CG / Havells

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. all as specified and directed.

S&F in repairs of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amps.

M& L for cutting of CI/GI pipe line 80 mm dia in position for insertion of new Tees , branches etc complete all as specified and directed. Note : Quoted rate is inclusive of the GI joint fitting.

Supply & laying GI water tubing medium grade with all fitting laid in trenches/walls of size 50 mm dia incl taking down old unsv pipe complete all as specified and directed.

Supply & laying GI water tubing medium grade with all fitting laid in trenches/walls of size 40 mm dia incl taking down old unsv pipe complete all as specified and directed.

Supply & laying GI water tubing medium grade with all fitting laid in trenches/walls of size 25 mm dia incl taking down old unsv pipe complete all as specified and directed.

M & L Gun metal gate valve 50 mm dia with iron wheel head screwed both ends for fixing of iron pipe complete all as specified and directed.

M & L Gun metal gate valve 40 mm dia with iron wheel head screwed both ends for fixing of iron pipe complete all as specified and directed.

M & L Gun metal gate valve 25 mm dia with iron wheel head screwed both ends for fixing of iron pipe complete all as specified and directed.

Sri Lakshmi Constructions

M/S POTHIRAJ AND CO